| 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
| BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...展开 BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. 收起 | |
| Hycure 1173 | ChemFine International Co., Ltd. | Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time. | |
| Hycure 184 | ChemFine International Co., Ltd. | Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time. | |
| Hycure 907 | ChemFine International Co., Ltd. | Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time. | |
| Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
| Hycure Benzil | ChemFine International Co., Ltd. | Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide. | |
| Hycure Benzoin | ChemFine International Co., Ltd. | Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry. | |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
| JLS-APP | ChemFine International Co., Ltd. | JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose. | |
| OIT | ChemFine International Co., Ltd. | OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint. | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...展开 ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...展开 ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 收起 | |
| ORGASOL® 2001 UD NAT 2 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 收起 | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 收起 | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 收起 | |
| ORGASOL® 2002 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 3501 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...展开 ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 3502 D NAT 1 | Arkema 阿科玛 | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...展开 ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. 收起 | |
| RILSAN® D30 NAT | Arkema 阿科玛 | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. 收起 | |
| RILSAN® D40 NAT | Arkema 阿科玛 | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. 收起 | |
| RILSAN® D50 NAT | Arkema 阿科玛 | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. 收起 | |
| RILSAN® D60 NAT | Arkema 阿科玛 | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. 收起 | |
| RILSAN® D80 NAT | Arkema 阿科玛 | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. 收起 | |
| TGIC | ChemFine International Co., Ltd. | TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...展开 TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. 收起 | |
| THEIC | ChemFine International Co., Ltd. | THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, ...展开 THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, textile, plastics, and photo industries. 收起 | |
| XYNFW | Xinyu South Wollastonite Co., Ltd. | XYNFW is a metasilicate calcium mineral used mainly in the ceramic industry. Additional applications include metallurgical protection slag and coatings, welding rod coatings, asbestos substitutes, and grinding adhesives. This product can also be used as a...展开 XYNFW is a metasilicate calcium mineral used mainly in the ceramic industry. Additional applications include metallurgical protection slag and coatings, welding rod coatings, asbestos substitutes, and grinding adhesives. This product can also be used as an additive for producing white cement. 收起 | |
| XYNFW-sw | Xinyu South Wollastonite Co., Ltd. | XYNFW-sw is a metasilicate calcium mineral fiber filling used in plastic, rubber, adhesives, paint, printing ink and paper. This product is well suited for use in the production of prime coats, intermediate coats, oil-based coatings, road sign coatings, s...展开 XYNFW-sw is a metasilicate calcium mineral fiber filling used in plastic, rubber, adhesives, paint, printing ink and paper. This product is well suited for use in the production of prime coats, intermediate coats, oil-based coatings, road sign coatings, sound insulation coatings and fireproof coatings. 收起 | |
| XYNFW-TA | Xinyu South Wollastonite Co., Ltd. | XYNFW-TA is a metasilicate calcium mineral used as an additive for ceramic glazing. This product is well suited for the production of durable high strength ceramics. |
