| Bentonorit® CA1 | Cabot Europe | Bentonorit® CA1 is a water dispersible pellet that is a dust free form of Norit® CA1. It is used for decolorization. This product can be used to target color body compounds in flavors and aromas for the food industry. | |
| Bentonorit® CAP WJ | Cabot Europe | Bentonorit® CAP WJ is a water dispersible pellet that is a dust free form of Norit® CA1. It is used for decolorization. This product can be used to target color body compounds in wine and juice for the food and beverage industry. | |
| Bentonorit® DX | Cabot Europe | Bentonorit® DX is a water dispersible pellet that is a dust free form of Norit® CA1. It is used for deodorization. This product can be used to target taste and odor compounds in wine and juice for the food and beverage industry. | |
| Bentonorit® SAS | Cabot Europe | Bentonorit® SAS is a water dispersible pellet that is a dust free form of Norit® CA1. It is used for deodorization, decolorization, and purification. This product can be used to target organic micro-pollutants and color in water for the food and beverage ...展开 Bentonorit® SAS is a water dispersible pellet that is a dust free form of Norit® CA1. It is used for deodorization, decolorization, and purification. This product can be used to target organic micro-pollutants and color in water for the food and beverage industry. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3536 P A | Elkem Silicones | BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| CAB-O-SIL® EH-5F | Cabot Europe | CAB-O-SIL® EH-5F is a tasteless, colorless, and odorless food grade silica. This product has a hydrophilic surface and low bulk density. It differs from CAB-O-SIL® M-5F by having a very high surface area of 380 m2/g. CAB-O-SIL® EH-5F can be used as a food...展开 CAB-O-SIL® EH-5F is a tasteless, colorless, and odorless food grade silica. This product has a hydrophilic surface and low bulk density. It differs from CAB-O-SIL® M-5F by having a very high surface area of 380 m2/g. CAB-O-SIL® EH-5F can be used as a food additive for flavor masking, anti-settling, thickening, anti-caking, and as a fat substitution additive. 收起 | |
| CAB-O-SIL® M-5F | Cabot Europe | CAB-O-SIL® M-5F is a tasteless, colorless, and odorless food grade silica. This product has a hydrophilic surface and low bulk density. It differs from CAB-O-SIL® EH-5F by having a medium surface area of 200 m2/g. CAB-O-SIL® M-5F can be used as a food add...展开 CAB-O-SIL® M-5F is a tasteless, colorless, and odorless food grade silica. This product has a hydrophilic surface and low bulk density. It differs from CAB-O-SIL® EH-5F by having a medium surface area of 200 m2/g. CAB-O-SIL® M-5F can be used as a food additive for flavor masking, anti-settling, thickening, anti-caking, and as a fat substitution additive. 收起 | |
| Darco® 12x20 LI | Cabot Europe | Darco® 12x20 LI is a granular activated carbon that is produced from steam activation of lignite coal. This product can be used for decolorization due to its high absorptive capacity for colors, flavors, and odors. It can be used in artificial sweeteners. | |
| Darco® 80x325 | Cabot Europe | Darco® 80x325 is a powder activated carbon with an acid wash. This product is produced by steam activation of lignite coal and has excellent filter-ability due to its particle size distribution. It can be used for de-colorization in artificial sweeteners,...展开 Darco® 80x325 is a powder activated carbon with an acid wash. This product is produced by steam activation of lignite coal and has excellent filter-ability due to its particle size distribution. It can be used for de-colorization in artificial sweeteners, filtration in starch based sweeteners and cane sugar. 收起 | |
| Darco® KB-G | Cabot Europe | Darco® KB-G is a powdered activated carbon that has superior absorptive qualities with good filtration properties. This product can be used for purification of highly colored and foaming processes in liquids in foods. It has the smallest particle of chemi...展开 Darco® KB-G is a powdered activated carbon that has superior absorptive qualities with good filtration properties. This product can be used for purification of highly colored and foaming processes in liquids in foods. It has the smallest particle of chemically activated carbons for faster kinetics. Darco® KB-G can be used for decolorization in apple juice, other fruit juices, beer, and wine. It can also be used to remove color in food products including edible oils, fish oil, fats, flavors, aromas, and in scrap candy recovery. 收起 | |
| Darco® KB-WJ | Cabot Europe | Darco® KB-WJ is a powder activated carbon that can be used for decolorization of highly colored liquids. This product is the highest activity of carbon for decolorization. Darco® KB-WJ can be used in the wine industry and for beverages including beer, app...展开 Darco® KB-WJ is a powder activated carbon that can be used for decolorization of highly colored liquids. This product is the highest activity of carbon for decolorization. Darco® KB-WJ can be used in the wine industry and for beverages including beer, apple juice, and other fruit juices. 收起 | |
| Darco® S-51 | Cabot Europe | Darco® S-51 is an acid washed powder activated carbon that has a high absorptive capacity. This product is produced by steam activation of lignite coal. It can be used for its purification properties in artificial sweeteners and liquid sugars, for flavor ...展开 Darco® S-51 is an acid washed powder activated carbon that has a high absorptive capacity. This product is produced by steam activation of lignite coal. It can be used for its purification properties in artificial sweeteners and liquid sugars, for flavor improving in starch based sweeteners and cane sugar. Darco® S-51 can also be used in scrap candy recovery. 收起 | |
| Darco® S-51A | Cabot Europe | Darco® S-51A is an acid washed powder activated carbon that is used for its purification properties. This product is produced by steam activation of lignite coal. It can be used for better flavor in cane sugar, liquid sugar, and beet sugar. | |
| Darco® S-51FF | Cabot Europe | Darco® S-51FF is an acid washed powdered activated carbon that has excellent filter-ability. This product is produced from the steam activation of lignite coal. It can be used for purification applications in liquid sugar and filtration applications in ar...展开 Darco® S-51FF is an acid washed powdered activated carbon that has excellent filter-ability. This product is produced from the steam activation of lignite coal. It can be used for purification applications in liquid sugar and filtration applications in artificial sweeteners, cane sugar, and starch based sweeteners. 收起 | |
| Darco® S-51HF | Cabot Europe | Darco® S-51HF is an acid washed powder activated carbon that has excellent filtration and decolorization properties. This product can be used for filtration in cane sugar, artificial sweetener, and in starch based sweeteners. | |
| Norit® C GRAN | Cabot Europe | Norit® C GRAN is a granular activated carbon that is used for absorbing high molecular weight organics like large color bodies and proteins. This product can be used in the food industry for special applications for organic molecule absorption. | |
| Norit® CA1 | Cabot Europe | Norit® CA1 is a powdered activated carbon that has a very high absorption capacity. This product has a high purity and excellent filtration properties. It can be used for purifying highly colored and foaming liquids for foods and beverages. Norit® CA1 fin...展开 Norit® CA1 is a powdered activated carbon that has a very high absorption capacity. This product has a high purity and excellent filtration properties. It can be used for purifying highly colored and foaming liquids for foods and beverages. Norit® CA1 finds application in lactose purification. 收起 | |
| Norit® CAP Super-WJ | Cabot Europe | Norit® CAP Super-WJ is a powdered activated carbon that is produced from chemical activation using the phosphoric acid process. This product has a high decolorization rate with low carbon dosing rates. It can be used for decolorization of highly colored l...展开 Norit® CAP Super-WJ is a powdered activated carbon that is produced from chemical activation using the phosphoric acid process. This product has a high decolorization rate with low carbon dosing rates. It can be used for decolorization of highly colored liquids for the food and beverage industry, specifically for wine. 收起 | |
| Norit® CASP | Cabot Europe | Norit® CASP is a chemically activated powder carbon. This product has high absorption capacity as well as filtration properties. It can be used for filtration in flavors and fragrances for food products. | |
| Norit® CASPF | Cabot Europe | Norit® CASPF is a powdered activated carbon that has a low extractable mineral content. This product has excellent filtration characteristics and high absorption capacity. This product can be used for purification of highly colored products and in foaming...展开 Norit® CASPF is a powdered activated carbon that has a low extractable mineral content. This product has excellent filtration characteristics and high absorption capacity. This product can be used for purification of highly colored products and in foaming processes in the food industry. 收起 | |
| Norit® CG 1P | Cabot Europe | Norit® CG 1P is a chemical activated powder carbon with a high absorption capacity. This product, produced from the phosphoric acid process, has excellent filtration and de-colorization properties. It can be used for de-colorization properties in edible o...展开 Norit® CG 1P is a chemical activated powder carbon with a high absorption capacity. This product, produced from the phosphoric acid process, has excellent filtration and de-colorization properties. It can be used for de-colorization properties in edible oils, fish oil, fats, and flavors and aromas for the food and beverage industries. 收起 | |
| Norit® CG4 | Cabot Europe | Norit® CG4 is a powdered activated carbon with de-colorizing and filtration properties. This high purity product has the ability to absorb large color bodies and proteins. It can be used in the food and beverage industry to purify highly colored and foami...展开 Norit® CG4 is a powdered activated carbon with de-colorizing and filtration properties. This high purity product has the ability to absorb large color bodies and proteins. It can be used in the food and beverage industry to purify highly colored and foaming liquids. 收起 | |
| Norit® CN1 | Cabot Europe | Norit® CN1 is a powdered activated carbon that has de-colorization and filtration properties. This product meets pH requirements for cane sugar applications. It can be used for purifying highly colored and foaming liquids in the food and beverage industry...展开 Norit® CN1 is a powdered activated carbon that has de-colorization and filtration properties. This product meets pH requirements for cane sugar applications. It can be used for purifying highly colored and foaming liquids in the food and beverage industry. 收起 | |
| Norit® D10 | Cabot Europe | Norit® D10 is a steam activated carbon. This product can absorb undesired tastes and odor compounds from beverages without affecting the desired natural character of the treated product. It can be used in alcoholic beverages like wine and spirits. | |
| Norit® DX 10 | Cabot Europe | Norit® DX 10 is a powdered activated carbon that has a high purity. This product can be used to remove unwanted taste and odor compounds without changing the natural character. It can be used in wine, beer, and spirits to improve sensory character. Norit®...展开 Norit® DX 10 is a powdered activated carbon that has a high purity. This product can be used to remove unwanted taste and odor compounds without changing the natural character. It can be used in wine, beer, and spirits to improve sensory character. Norit® DX 10 can also be used to remove color precursors from fruit juices. 收起 | |
| Norit® GAC 1240 | Cabot Europe | Norit® GAC 1240 is a granular activated carbon that offers excellent absorption properties. This product can be used to remove small to medium molecules from several applications including water. It can also be used in food applications like cane sugar fo...展开 Norit® GAC 1240 is a granular activated carbon that offers excellent absorption properties. This product can be used to remove small to medium molecules from several applications including water. It can also be used in food applications like cane sugar for decolorization and flavor improvement. 收起 | |
| Norit® GAC 1240 | Cabot Europe | Norit® GAC 1240 is a granular activated carbon. This micro-porous product is used to remove dissolved organics and is suited for thermal reactivation. It is made from coconut shells by steam activation. Norit® GAC 1240 can be used for the purification of ...展开 Norit® GAC 1240 is a granular activated carbon. This micro-porous product is used to remove dissolved organics and is suited for thermal reactivation. It is made from coconut shells by steam activation. Norit® GAC 1240 can be used for the purification of water and in soft drinks. 收起 | |
| Norit® GAC 1240 Plus | Cabot Europe | Norit® GAC 1240 Plus is an acid washed granular activated carbon. This product has a high purity and can be used for removing medium to small color bodies. It can be used in food and beverage applications, specifically in water. | |
| Norit® GAC 1240 Plus | Cabot Europe | Norit® GAC 1240 Plus is an acid washed granular activated carbon. This product has extreme purity and superior hardness that is suited for thermal reactivation. It can be used as a purification agent in food and beverage applications including water and i...展开 Norit® GAC 1240 Plus is an acid washed granular activated carbon. This product has extreme purity and superior hardness that is suited for thermal reactivation. It can be used as a purification agent in food and beverage applications including water and in distilled spirits. 收起 | |
| Norit® GAC 400 | Cabot Europe | Norit® GAC 400 is a granular activated carbon. This product has a high absorptive capacity, good for removing medium to small molecules. It can be used to remove impurities in water and soft drinks. | |
| Norit® GAC 830 Plus | Cabot Europe | Norit® GAC 830 Plus is a granular activated carbon with high absorption capacity. This product has a high purity that is produced from steam activation of select grades of coal. It can be used for flavor improvement in starch based sweeteners and for the ...展开 Norit® GAC 830 Plus is a granular activated carbon with high absorption capacity. This product has a high purity that is produced from steam activation of select grades of coal. It can be used for flavor improvement in starch based sweeteners and for the removal of impurities in water. 收起 | |
| Norit® MAG 301 | Cabot Europe | Norit® MAG 301 is a granular activated carbon that has superior absorption properties. This product is produced from select grades of coal and has magnesium incorporated in the carbon matrix. It can be used for flavor improvement in cane sugar and cane su...展开 Norit® MAG 301 is a granular activated carbon that has superior absorption properties. This product is produced from select grades of coal and has magnesium incorporated in the carbon matrix. It can be used for flavor improvement in cane sugar and cane sugar syrups. 收起 | |
| Norit® PAC 200 | Cabot Europe | Norit® PAC 200 is a powder activated carbon that has a high absorptive capacity. This product, made from coal, is good for removing medium to small molecules. It can be used to remove taste, odor, and color from some industrial applications including wate...展开 Norit® PAC 200 is a powder activated carbon that has a high absorptive capacity. This product, made from coal, is good for removing medium to small molecules. It can be used to remove taste, odor, and color from some industrial applications including water and apple juice. 收起 | |
| Norit® PK 1-3 | Cabot Europe | Norit® PK 1-3 is a granular activated carbon that is produced from steam activation. This product has an alkaline pH and is used for alcohol and vodka purification. | |
| Norit® PN 2 | Cabot Europe | Norit® PN 2 is a powder activated carbon with a neutral pH. This product has a high absorptive capacity that can be used to remove small color bodies and odor compounds. It can be used in sugar and sugar syrups. | |
| Norit® ROX .8 | Cabot Europe | Norit® ROX .8 is an acid washed extruded carbon with an extremely low mineral content. This product has superior absorption properties and an ultra high purity level. It can be used for purification of water and demineralised starch based sweeteners. | |
| Norit® SA 4 PAH | Cabot Europe | Norit® SA 4 PAH is a steam activated powdered carbon that has superior filtration characteristics. It differs from Norit® SA 4 PAH-HF by having a smaller particle size. This product is designed to be used for the bleaching of edible oils and fats includin...展开 Norit® SA 4 PAH is a steam activated powdered carbon that has superior filtration characteristics. It differs from Norit® SA 4 PAH-HF by having a smaller particle size. This product is designed to be used for the bleaching of edible oils and fats including vegetable oils and fish oils. 收起 | |
| Norit® SA 4 PAH-HF | Cabot Europe | Norit® SA 4 PAH-HF is a steam activated powder carbon with superior filtration properties. This product differs from Norit® SA 4 PAH by having a larger particle size. It can be used for the bleaching of edible oils and fats. | |
| Norit® SX 1G | Cabot Europe | Norit® SX 1 G is an acid washed steam activated carbon with a high absorptive capacity. This product has excellent filtration series that can be dedicated to obtain colorless liquids and white crystals. It can be used for decolorization and purification o...展开 Norit® SX 1 G is an acid washed steam activated carbon with a high absorptive capacity. This product has excellent filtration series that can be dedicated to obtain colorless liquids and white crystals. It can be used for decolorization and purification of food products and beverages such as distilled spirits. 收起 | |
| Norit® SX Plus | Cabot Europe | Norit® SX Plus is an acid washed steam activated carbon that has ultra high purity and absorption capacity. This product can be used for its purification and decolorization properties in food and beverage applications. It can be used in starch based sweet...展开 Norit® SX Plus is an acid washed steam activated carbon that has ultra high purity and absorption capacity. This product can be used for its purification and decolorization properties in food and beverage applications. It can be used in starch based sweeteners. 收起 | |
| Norit® SX Ultra | Cabot Europe | Norit® SX Ultra is an acid washed, steam activated carbon with excellent filtration characteristics. This product has a superior absorption capacity. It can be used for the purification and decolorization of food and beverage products including distilled ...展开 Norit® SX Ultra is an acid washed, steam activated carbon with excellent filtration characteristics. This product has a superior absorption capacity. It can be used for the purification and decolorization of food and beverage products including distilled spirits. 收起 | |
| Norit® Vapture 410 | Cabot Europe | Norit® Vapture 410 is a granular activated carbon that is manufactured from select grades of coal. This product has superior absorption properties and is manufactured from select grades of coal. It can be used for removal of odors, toxic vapors, irritants...展开 Norit® Vapture 410 is a granular activated carbon that is manufactured from select grades of coal. This product has superior absorption properties and is manufactured from select grades of coal. It can be used for removal of odors, toxic vapors, irritants, and gases. Norit® Vapture 410 can be used for purification and separation processes in several beverage applications including beer. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展开 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展开 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展开 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展开 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 |
