| Acerola Fruit Extract 17% Native Ascorbic Acid (UV) | Monteloeder S.L. | Acerola Fruit Extract 17% Native Ascorbic Acid is an extract derived from the fruit of Malpighia glabra L. This product is standardized for 17% Native Ascorbic Acid (Vitamin C). This Acerola Extract has antioxidant and astringent effects. | |
| Acerola Fruit Extract 25% Ascorbic Acid (HPLC) | Monteloeder S.L. | Acerola Fruit Extract 25% Ascorbic Acid is an extract derived from the fruit of Malpighia glabra L. This product is soluble in water and is standardized for 25% Ascorbic Acid (Vitamin C). This Acerola Extract has antioxidant and astringent effects. | |
| Angelica Root Extract 5:1 | Monteloeder S.L. | Angelica Root Extract 5:1 is an extract derived from the root of Angelica archangelica L. This product has a plant/extract ratio 5:1. This Angelica Extract is primarily use to help balance hormones, detoxify the liver, support health and clear skin compl...展开 Angelica Root Extract 5:1 is an extract derived from the root of Angelica archangelica L. This product has a plant/extract ratio 5:1. This Angelica Extract is primarily use to help balance hormones, detoxify the liver, support health and clear skin complexion. 收起 | |
| Apigenin 95% (HPLC) | Monteloeder S.L. | Apigenin 95% (HPLC) is a yellowish powder with characteristic odour and taste. This product is a flavone obtained from the natural flavonone naringin with a minimum purity of 95%. The Apigenin has high anti-inflammatory effects. | |
| Artichoke Leaf Extract 5% Polyphenols (UV) | Monteloeder S.L. | Artichoke Leaf Extract 5% Polyphenols is an extract derived from the leaves of Cynara scolymus. This product is standardized for 5% Total polyphenols expressed in Cynarin. The Artichoke Extract has antioxidant and detoxifier effects, is an intestinal and ...展开 Artichoke Leaf Extract 5% Polyphenols is an extract derived from the leaves of Cynara scolymus. This product is standardized for 5% Total polyphenols expressed in Cynarin. The Artichoke Extract has antioxidant and detoxifier effects, is an intestinal and liver protector and contributes to normal blood lipid levels. 收起 | |
| Bilberry Fruit Extract 25% Anthocyanosides (UV) | Monteloeder S.L. | Bilberry Fruit Extract 25% Anthocyanosides is an extract derived from the fruits of Vaccinium myrtillus L. This product is standardized for 25% Anthocyanosides. The Bilberry Extract has antioxidant and anti-inflammatory effects, contributes to mantain a h...展开 Bilberry Fruit Extract 25% Anthocyanosides is an extract derived from the fruits of Vaccinium myrtillus L. This product is standardized for 25% Anthocyanosides. The Bilberry Extract has antioxidant and anti-inflammatory effects, contributes to mantain a healthy vision and is a gut protector. 收起 | |
| Black Elderberry extract 1% Antocyanins (UV) | Monteloeder S.L. | Black Elderberry extract 1% Antocyanins is an extract derived from the berries of Sambucus nigra. This product is standardized for 1% Antocyanins (as Cya-3-glu). The Black Elderberry Extract helps to support the immune system and provide antioxidants. | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3536 P A | Elkem Silicones | BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| California Poppy Extract 0.2% Total Alkaloids (as californidine) | Monteloeder S.L. | California Poppy Extract 0.2% Total Alkaloids (as californidine) is an extract derived from the aerial part of Papaveraceae Eschscholzia californica Cham. This product is standardized for 0.2% Total alkaloids expressed as californidine. This California Po...展开 California Poppy Extract 0.2% Total Alkaloids (as californidine) is an extract derived from the aerial part of Papaveraceae Eschscholzia californica Cham. This product is standardized for 0.2% Total alkaloids expressed as californidine. This California Poppy Extract is traditionally used for its calming and supportive actions for the entire nervous system. It helps with stress and to sleep. 收起 | |
| Cat's Claw Bark Extract 3% Alkaloids (UV) | Monteloeder S.L. | Cat's Claw Bark Extract 3% Alkaloids is an extract derived from bark of Uncaria tomentosa. This product is soluble in water and is standardized for 3% Total Alkaloids. The Cat's Claw Extract helps to support the natural defenses and join health. It has a ...展开 Cat's Claw Bark Extract 3% Alkaloids is an extract derived from bark of Uncaria tomentosa. This product is soluble in water and is standardized for 3% Total Alkaloids. The Cat's Claw Extract helps to support the natural defenses and join health. It has a powerful anti-inflammatory effects. 收起 | |
| CBC 35% Hesperidin (HPLC) | Monteloeder S.L. | CBC 35% Hesperidin is derived from Citrus sinensis or Citrus aurantium. This product is standardized for 35% Hesperidin. The Citrus Bioflavonoid Complex has properties like cardiovascular protection, weight control, helps with circulatory peripheral disor...展开 CBC 35% Hesperidin is derived from Citrus sinensis or Citrus aurantium. This product is standardized for 35% Hesperidin. The Citrus Bioflavonoid Complex has properties like cardiovascular protection, weight control, helps with circulatory peripheral disorders and has antioxidant effects. 收起 | |
| Chamomille Flowers Extract 1% Flavones (HPLC) | Monteloeder S.L. | Chamomille Flowers Extract 1% Flavones is an extract derived from the flowers of Matricaria recutita. This product is soluble in water and is standardized for 1% Total Flavones (as Apigenin-7-g). The Chamomille Extract has calming/relaxing, anti-inflamato...展开 Chamomille Flowers Extract 1% Flavones is an extract derived from the flowers of Matricaria recutita. This product is soluble in water and is standardized for 1% Total Flavones (as Apigenin-7-g). The Chamomille Extract has calming/relaxing, anti-inflamatory and good anti-bacterial effects and helps to support the digestion. 收起 | |
| Chamomille Flowers Extract 4% Flavones (HPLC) | Monteloeder S.L. | Chamomille Flowers Extract 4% Flavones is an extract derived from the flowers of Matricaria recutita. This product is water soluble and is standardized for 4% Total Flavones (as Apigenin-7-g). The Chamomille Extract has calming/relaxing, anti-inflamatory ...展开 Chamomille Flowers Extract 4% Flavones is an extract derived from the flowers of Matricaria recutita. This product is water soluble and is standardized for 4% Total Flavones (as Apigenin-7-g). The Chamomille Extract has calming/relaxing, anti-inflamatory and good anti-bacterial effects and helps to support the digestion. 收起 | |
| Cocoa Extract 45% Polyphenols (Folin C.) | Monteloeder S.L. | Cocoa Extract 45% Polyphenols (Folin C) is an extract derived from the seeds of Theobroma cacao. This product is standardized for 45% Polyphenols. The Cocoa Extract has antioxidant effect and prevent LDL oxidation. | |
| Cranberry Fruit Extract (25:1), 3% PAC (UV) | Monteloeder S.L. | Cranberry Fruit Extract Ratio 25:1, 3% PAC is an extract derived from the berries of Vaccinium macrocarpon Aiton. This product is standardized for 3% Total Proanthocyanidins (as Cyanidin Chloride) and has a plant/extract ratio 25:1. The Cranberry Extract ...展开 Cranberry Fruit Extract Ratio 25:1, 3% PAC is an extract derived from the berries of Vaccinium macrocarpon Aiton. This product is standardized for 3% Total Proanthocyanidins (as Cyanidin Chloride) and has a plant/extract ratio 25:1. The Cranberry Extract helps to maintain a healthy urinary tract. 收起 | |
| D-Alpha-Tocopheryl acetate 500 IU/g | Monteloeder S.L. | D-Alpha-Tocopheryl acetate 500 IU/g is a off-white to beig granular powder with a bland characteristic odour and taste. This product has a loss on drying of Max. 5% and an assay of Max. 500mg/g of Tocopherols content. | |
| Devil's Claw Root Extract 2.7% Harpagosides (HPLC) | Monteloeder S.L. | Devil's Claw Root Extract 2.7% Harpagosides is an extract derived from the roots of Harpagophytum procumbens. This product is soluble in water and is standardized for 2.7% Total Harpagosides. The Devil's Claw Extract helps to treat all types of joint pain...展开 Devil's Claw Root Extract 2.7% Harpagosides is an extract derived from the roots of Harpagophytum procumbens. This product is soluble in water and is standardized for 2.7% Total Harpagosides. The Devil's Claw Extract helps to treat all types of joint pains and has a strong anti-inflammatory effect. 收起 | |
| Echinacea Purpurea (Aerial Part) Extract 4% Caffeoyll Compounds (HPLC) WS | Monteloeder S.L. | Echinacea Purpurea (Aerial Part) Extract 4% Caffeoyll Compounds (Polyphenols) is an extract derived from aerial part of Echinacea purpurea L. This product is soluble in water and is standardized for 4% Total Caffeoyll Compounds (Polyphenols). This Echinac...展开 Echinacea Purpurea (Aerial Part) Extract 4% Caffeoyll Compounds (Polyphenols) is an extract derived from aerial part of Echinacea purpurea L. This product is soluble in water and is standardized for 4% Total Caffeoyll Compounds (Polyphenols). This Echinacea Purpurea Extract has immunity supporting the natural defenses, especially at the level of the upper respiratory tract. 收起 | |
| Eucalyptus Extract 4:1 | Monteloeder S.L. | Eucalyptus Extract 4:1 is an extract derived from the leaves of Eucalyptus globulus L. This product has a plant/extract ratio 4:1. This Eucalyptus Extract is traditionally used for immune support. | |
| Eyebright Extract 4:1 | Monteloeder S.L. | Eyebright Extract 4:1 is an extract derived from aerial part of Eufrasia officinalis L. This product has a plant/extract ratio 4:1. This Eyebright Extract helps to support eye health. | |
| Grape Seed Extract 95% PACs (UV) | Monteloeder S.L. | Grape Seed Extract 95% Proanthocyanidins PACs is an extract derived from the seeds of Vitis vinifera L. This product is standardized for 95% Proanthocyanidins PACs. This Grape Seed Extract has a high antioxidant effect. | |
| Grape Skin Extract 25% Polyphenols (UV) | Monteloeder S.L. | Grape Skin Extract 25% Polyphenols is an extract derived from skin of Vitis vinifera. This product is practically soluble in water and is standardized for 25% Total polyphenols. This Grape Skin Extract has a strong antioxidant effect. | |
| Grape Skin Extract 5% Anthocyanines (UV) | Monteloeder S.L. | Grape Skin Extract 5% Anthocyanines is an extract derived from black grapes of Vitis vinifera. This product is practically soluble in water and is standardized for 5% Anthocyanins. This Grape Skin Extract has a strong antioxidant effect. The Anthocyanins ...展开 Grape Skin Extract 5% Anthocyanines is an extract derived from black grapes of Vitis vinifera. This product is practically soluble in water and is standardized for 5% Anthocyanins. This Grape Skin Extract has a strong antioxidant effect. The Anthocyanins reduce permeability and capillary fragility and helps protecting against UV radiation. 收起 | |
| Grapefruit Extract 0.7% Flavonoids (HPLC) Liquid | Monteloeder S.L. | Grapefruit Extract 0.7% Flavonoids (HPLC) Liquid is an extract derived from the whole fruit of Citrus paradisi. This product is water soluble and is standardized for 0.7% Total Bioflavonoids (as Naringin) (HPLC). The Grapefruit Extract has antioxidant, an...展开 Grapefruit Extract 0.7% Flavonoids (HPLC) Liquid is an extract derived from the whole fruit of Citrus paradisi. This product is water soluble and is standardized for 0.7% Total Bioflavonoids (as Naringin) (HPLC). The Grapefruit Extract has antioxidant, anti-inflammatory, antibacterial and antifungal activities. 收起 | |
| Grapefruit Extract 1.2% Flavonoids (HPLC) Organic Liquid (Water Extraction) | Monteloeder S.L. | Grapefruit extract 1.2% flavonoids (HPLC) Organic Liquid (Water Extraction) is an extract derived from the whole fruit of Citrus paradisi. This product is water soluble and is standardized for 1.2% Total bioflavonoids on liquid extract (as naringine, as d...展开 Grapefruit extract 1.2% flavonoids (HPLC) Organic Liquid (Water Extraction) is an extract derived from the whole fruit of Citrus paradisi. This product is water soluble and is standardized for 1.2% Total bioflavonoids on liquid extract (as naringine, as db). The Organic Grapefruit Extract has antioxidant, anti-inflammatory, antibacterial and antifungal activities. 收起 | |
| Grapefruit Extract 45% Flavonoids (HPLC) | Monteloeder S.L. | Grapefruit Extract 45% Flavonoids is an extract derived from whole immature fruit of Citrus paradisi. This product is standardized for 45% Total BioFlavonoids. The Grapefruit Extract has antioxidant, anti-inflammatory, antibacterial and antifungal activit...展开 Grapefruit Extract 45% Flavonoids is an extract derived from whole immature fruit of Citrus paradisi. This product is standardized for 45% Total BioFlavonoids. The Grapefruit Extract has antioxidant, anti-inflammatory, antibacterial and antifungal activities. 收起 | |
| Guarana Seed Extract 22% Caffeine (HPLC) WS | Monteloeder S.L. | Guarana Seed Extract 22% Caffeine is an extract derived from the seeds of Paullinia cupana. This product is soluble in water and is standardized for 22% Caffeine. This Guarana Extract helps to support vitality, sport endurance and slimming programs. It is...展开 Guarana Seed Extract 22% Caffeine is an extract derived from the seeds of Paullinia cupana. This product is soluble in water and is standardized for 22% Caffeine. This Guarana Extract helps to support vitality, sport endurance and slimming programs. It is stimulant without any effect on blood pressure, reduce mental fatigue. 收起 | |
| Hibiscus Flower Extract 10% Anthocyanidins (UV) | Monteloeder S.L. | Hibiscus Flower Extract 10% Anthocyanidins is an extract derived from the the flowers of Hibiscus sabdariffa L. This product is water soluble and is standardized for 10% Anthocyanidins. This Hibiscus Extract helps to manage high blood presure. | |
| Hops Strobilus Extract 2% Rutosides (UV) | Monteloeder S.L. | Hops Strobilus Extract 2% Rutosides is an extract derived from Humulus lupulus L. This product is standardized for 2% Rutosides. This Hops Strobilus Extract has calming/relaxing effect. This product supports digestive Health, anti-microbial and antioxidan...展开 Hops Strobilus Extract 2% Rutosides is an extract derived from Humulus lupulus L. This product is standardized for 2% Rutosides. This Hops Strobilus Extract has calming/relaxing effect. This product supports digestive Health, anti-microbial and antioxidant. Helps women by alleviating the climacteric signs associated with menopause and contributes to a normal cholesterol level. 收起 | |
| Hops Strobilus Extract 5:1 | Monteloeder S.L. | Hops Strobilus Extract 5:1 is an extract derived from Humulus lupulus L. This product has a plant/extract ratio 5:1. This Hops Strobilus Extract has calming/relaxing effect. This product supports digestive Health, anti-microbial and antioxidant. Helps wom...展开 Hops Strobilus Extract 5:1 is an extract derived from Humulus lupulus L. This product has a plant/extract ratio 5:1. This Hops Strobilus Extract has calming/relaxing effect. This product supports digestive Health, anti-microbial and antioxidant. Helps women by alleviating the climacteric signs associated with menopause and contributes to a normal cholesterol level. 收起 | |
| Horse Chestnut Bark Extract 15% Triterpens (UV) | Monteloeder S.L. | Horse Chestnut Bark Extract 15% Triterpens is an extract derived from bark of Aesculus hippocastanum L. This product is standardized for 15% Triterpens calculated as Aescin. The Horse Chestnut Extract has been used for circulatory disorders. | |
| Horsetail Extract 7% Silica (UV) | Monteloeder S.L. | Horsetail Extract 7% Silica is an extract derived from the grass of Equisetum arvense L. This product is standardized for 7% Silica. The Horsetail Extract has diuretic effect, supports the excretory function of the kidneys. The product is useful in case o...展开 Horsetail Extract 7% Silica is an extract derived from the grass of Equisetum arvense L. This product is standardized for 7% Silica. The Horsetail Extract has diuretic effect, supports the excretory function of the kidneys. The product is useful in case of genitourinary disease, cystitis and prostatitis and as remineralizing and regenerating connective tissue giving elasticity and resistance. 收起 | |
| Lemon Balm Leaf Extract 1% Rosmarinic Acid (HPLC) | Monteloeder S.L. | Lemon Balm Leaf Extract 1% Rosmarinic Acid is an extract derived from the leaves of Melissa officinalis. This product is soluble in water and is standardized for 1% Rosmarinic acid. This Lemon Balm Extract has calming/relaxing effect, promotes sleep and s...展开 Lemon Balm Leaf Extract 1% Rosmarinic Acid is an extract derived from the leaves of Melissa officinalis. This product is soluble in water and is standardized for 1% Rosmarinic acid. This Lemon Balm Extract has calming/relaxing effect, promotes sleep and supports digestive Health. 收起 | |
| Lemon Balm Leaf Extract 2% Rosmarinic Acid (HPLC) WS | Monteloeder S.L. | Lemon Balm Leaf Extract 2% Rosmarinic Acid is an extract derived from the leaves of Melissa officinalis. This product is soluble in water and is standardized for 2% Rosmarinic acid. This Lemon Balm Extract has calming/relaxing effect, promotes sleep and s...展开 Lemon Balm Leaf Extract 2% Rosmarinic Acid is an extract derived from the leaves of Melissa officinalis. This product is soluble in water and is standardized for 2% Rosmarinic acid. This Lemon Balm Extract has calming/relaxing effect, promotes sleep and supports digestive Health. 收起 | |
| MetabolAid® | Monteloeder S.L. | Metabolaid® is a proprietary formula comprising Hibiscus flower and Lemon verbena leaf extracts, highly purified in polyphenolic content. The active compounds of the blend have been scientifically demonstrated to act synergistically on their functional ta...展开 Metabolaid® is a proprietary formula comprising Hibiscus flower and Lemon verbena leaf extracts, highly purified in polyphenolic content. The active compounds of the blend have been scientifically demonstrated to act synergistically on their functional targets. The Hibiscus and Lemon verbena extracts, that make up Metabolaid®, enhance weight management and cardiovascular health effects. Metabolaid® acts activating the AMPK pathways and controlling the appetite to support healthy blood pressure. 收起 | |
| Move!PLX | Monteloeder S.L. | Move!PLX is a botanical extract derived from the leaves of the Lippia citriodora plant. Lemon verbena has a high polyphenolic content, being verbascoside one of the most abundant. Move!PLX is obtained through a unique extraction process to concentrate the...展开 Move!PLX is a botanical extract derived from the leaves of the Lippia citriodora plant. Lemon verbena has a high polyphenolic content, being verbascoside one of the most abundant. Move!PLX is obtained through a unique extraction process to concentrate the final product in verbascoside, resulting in one of the most purified forms available in the market with this plant. These polyphenols confer the plant the wellness properties scientifically proven. Move!PLX helps to enhance the body’s natural antioxidant defenses and reduce pro-inflammatory and muscle/joint damage markers. 收起 | |
| Nutroxsun® | Monteloeder S.L. | Nutroxsun® is a clinically proven combination of Rosemary and Grapefruit extracts that protects the skin from inside-out. Nutroxsun® is a beauty from within solution to manage the negative effects if solar radiation. Its effect is systemic, preventing and...展开 Nutroxsun® is a clinically proven combination of Rosemary and Grapefruit extracts that protects the skin from inside-out. Nutroxsun® is a beauty from within solution to manage the negative effects if solar radiation. Its effect is systemic, preventing and reducing photoinduced oxidation, skin photodamage, and photoaging. Nutroxsun® scientifically backed ingredients provide antiaging benefits, reduces wrinkle depth and improves elasticity, by protecting cutaneous structure components. 收起 | |
| Olive Fruit Extract 20% Hydroxytyrosol (HPLC) | Monteloeder S.L. | Olive Fruit Extract 20% Hydroxytyrosol is an extract derived from the fruits of Olea europaea L. This product is standardized for 20% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The produ...展开 Olive Fruit Extract 20% Hydroxytyrosol is an extract derived from the fruits of Olea europaea L. This product is standardized for 20% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promotes Cardiovascular Health and decreases in LDL oxidation. It has been used for blood pressure and glucose control. 收起 | |
| Olive Fruit Extract 20% Hydroxytyrosol (HPLC) syrup | Monteloeder S.L. | Olive Fruit Extract 20% Hydroxytyrosol Syrup is an extract derived from the fruits of Olea europaea L. This product is standardized for 20% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The...展开 Olive Fruit Extract 20% Hydroxytyrosol Syrup is an extract derived from the fruits of Olea europaea L. This product is standardized for 20% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promotes Cardiovascular Health and decreases in LDL oxidation. It has been used for blood pressure and glucose control. 收起 | |
| Olive Fruit Extract 7% Hydroxytyrosol (HPLC) Powder | Monteloeder S.L. | Olive Fruit Extract 7% Hydroxytyrosol is an extract derived from the fruits of Olea europaea L. This product is standardized for 7% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product...展开 Olive Fruit Extract 7% Hydroxytyrosol is an extract derived from the fruits of Olea europaea L. This product is standardized for 7% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promotes Cardiovascular Health and decreases in LDL oxidation. It has been used for blood pressure and glucose control. 收起 | |
| Olive Leaf Extract 20% Hydroxytyrosol (HPLC) | Monteloeder S.L. | Olive Leaf Extract 20% Hydroxytyrosol is an extract derived from the leaves of Olea europaea L. This product is soluble in water and is standardized for 20% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whit...展开 Olive Leaf Extract 20% Hydroxytyrosol is an extract derived from the leaves of Olea europaea L. This product is soluble in water and is standardized for 20% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promotes Cardiovascular Health and decreases in LDL oxidation. It has been used for blood pressure and glucose control. 收起 | |
| Olive Leaf Extract 20% Oleuropein (HPLC Indofine) | Monteloeder S.L. | Olive Leaf Extract 20% Oleuropein is an extract derived from the leaves of Olea europaea L. This product is standardized for 20% Oleuropein. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promot...展开 Olive Leaf Extract 20% Oleuropein is an extract derived from the leaves of Olea europaea L. This product is standardized for 20% Oleuropein. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promotes Cardiovascular Health and decreases in LDL oxidation. It has been used for blood pressure and glucose control. 收起 | |
| Olive Leaf Extract 7% Hydroxytyrosol (HPLC) | Monteloeder S.L. | Olive Leaf Extract 7% Hydroxytyrosol is an extract derived from the leaves of Olea europaea L. This product is standardized for 7% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product ...展开 Olive Leaf Extract 7% Hydroxytyrosol is an extract derived from the leaves of Olea europaea L. This product is standardized for 7% Hydroxytyrosol. This Olive Extract supports immunity, has antioxidant, antimicrobial and skin whitening effect. The product promotes Cardiovascular Health and decreases in LDL oxidation. It has been used for blood pressure and glucose control. 收起 | |
| Passiflora Extract 3.5% Flavonoids (HPLC) (4% UV) | Monteloeder S.L. | Passiflora (Passion Flower) Extract 3.5% Flavonoids (HPLC) (4% UV) is an extract derived from the aerial part of Passiflora incarnata L. This product is soluble in water at 95% and is standardized for 3.5% Vitexins and 4% Flavonoids (as vitexins). This Pa...展开 Passiflora (Passion Flower) Extract 3.5% Flavonoids (HPLC) (4% UV) is an extract derived from the aerial part of Passiflora incarnata L. This product is soluble in water at 95% and is standardized for 3.5% Vitexins and 4% Flavonoids (as vitexins). This Passiflora Extract (Passion Flower) has calming effect and helps to treat anxiety, insomnia and gastrointestinal upset. 收起 | |
| Polypodium Leaves Extract 2.8% Polyphenols (UV) | Monteloeder S.L. | Polypodium Leaves Extract 2.8% Polyphenols is an extract derived from the leaves of Polypodium leucotomos L. This product is standardized for 2.8% Polyphenols. This Polypodium Extract helps to prevent certain skin problems including sunburn, atopic dermat...展开 Polypodium Leaves Extract 2.8% Polyphenols is an extract derived from the leaves of Polypodium leucotomos L. This product is standardized for 2.8% Polyphenols. This Polypodium Extract helps to prevent certain skin problems including sunburn, atopic dermatitis, psoriasis and vitiligo. 收起 | |
| Pomegranate Extract 40% Punicalagins (HPLC) | Monteloeder S.L. | Pomegranate Extract 40% Punicalagins is an extract derived from the fruits of Punica granatum L. This product is standardized for 40% Punicalagins. This Pomegranate Extract has ntioxidant and antimicrobial effect, inhibits oxidation of LDL and promotes he...展开 Pomegranate Extract 40% Punicalagins is an extract derived from the fruits of Punica granatum L. This product is standardized for 40% Punicalagins. This Pomegranate Extract has ntioxidant and antimicrobial effect, inhibits oxidation of LDL and promotes healthy blood pressure, vascular health and immunity. 收起 | |
| Quassia Amara Bark Extract 4:1 | Monteloeder S.L. | Quassia Amara Bark Extract 4:1 is an extract derived from bark of Quassia amara L. This product has a plant/extract ratio 4:1. This Quassia Amara Extract has anti-inflammatory, antibacterial and antifungal properties. | |
| Rhodiola Rosea Root Extract 3% Rosavins 1% Salidroside (HPLC) | Monteloeder S.L. | Rhodiola Rosea Root Extract 3% Rosavins 1% Salidroside is an extract derived from dried roots of Rhodiola rosea. This product is standardized for 3% Rosavins and 1% Salidroside. This Rhodiola Rosea Extract has antioxidant effect. It helps in the fight aga...展开 Rhodiola Rosea Root Extract 3% Rosavins 1% Salidroside is an extract derived from dried roots of Rhodiola rosea. This product is standardized for 3% Rosavins and 1% Salidroside. This Rhodiola Rosea Extract has antioxidant effect. It helps in the fight against stress, anxiety, fatigue and to recover the body after high muscular work, performance and physical resistance. 收起 | |
| Rosemary Extract 3% Diterpenes (HPLC) | Monteloeder S.L. | Rosemary Extract 3% Diterpenes is an extract derived from the leaves of Rosmarinus officinalis L. This product is standardized for 3% Total Diterpens. This Rosemary Extract has antioxidant and antimicrobial effects. It enhances memory and concentration an...展开 Rosemary Extract 3% Diterpenes is an extract derived from the leaves of Rosmarinus officinalis L. This product is standardized for 3% Total Diterpens. This Rosemary Extract has antioxidant and antimicrobial effects. It enhances memory and concentration and improves hair condition and growth. This Rosemary extract can be used and antioxidant food and beverage additive. 收起 | |
| Ruscus Extract 4:1 | Monteloeder S.L. | Ruscus Extract 4:1 is an extract derived from the roots of Ruscus aculeatus L. This product has a plant/extract ratio 4:1. This Ruscus Extract has anti-inflammation effect. It is useful to treat circulatory disorder, leg swelling, varicose veins and hemor...展开 Ruscus Extract 4:1 is an extract derived from the roots of Ruscus aculeatus L. This product has a plant/extract ratio 4:1. This Ruscus Extract has anti-inflammation effect. It is useful to treat circulatory disorder, leg swelling, varicose veins and hemorrhoids. The Ruscus Extract can be used as mild laxative and diuretic. 收起 | |
| Saffron Stigmas Extract 2.0% Safranal (UV) 4.0% Crocins (UV) | Monteloeder S.L. | Saffron Stigmas Extract 2.0% Safranal (UV) 4.0% Crocins (UV) is an extract derived from thered stigmas of Crocus sativus L. This product is standardized for 2% Safranal 4% Crocins. This Saffron Extract promotes learning and memory retention, increases vit...展开 Saffron Stigmas Extract 2.0% Safranal (UV) 4.0% Crocins (UV) is an extract derived from thered stigmas of Crocus sativus L. This product is standardized for 2% Safranal 4% Crocins. This Saffron Extract promotes learning and memory retention, increases vitality and has antidepressant properties. 收起 | |
| Salvia Officinalis Extract 4% Rosmarinic Acid (HPLC) | Monteloeder S.L. | Salvia Officinalis (Sage) Extract 4% Rosmarinic Acid is an extract derived from the leaves of Salvia officinalis. This product is standardized for 4% Rosmarinic acid. This Salvia Officinalis (Sage) Extract has shown to contain oestrogenic substances and i...展开 Salvia Officinalis (Sage) Extract 4% Rosmarinic Acid is an extract derived from the leaves of Salvia officinalis. This product is standardized for 4% Rosmarinic acid. This Salvia Officinalis (Sage) Extract has shown to contain oestrogenic substances and is effective in the treatment of menstrual disorders. Also it is very useful in digestive problems, as well as being an antiseptic which delays the intestinal fermentations. 收起 | |
| Salvia Officinalis Extract 4:1 | Monteloeder S.L. | Salvia Officinalis (Sage) Extract 4:1 is an extract derived from the leaves of Salvia officinalis. This product has a plant/extract ratio 4:1 and is water soluble. This Salvia Officinalis (Sage) Extract has shown to contain oestrogenic substances and is e...展开 Salvia Officinalis (Sage) Extract 4:1 is an extract derived from the leaves of Salvia officinalis. This product has a plant/extract ratio 4:1 and is water soluble. This Salvia Officinalis (Sage) Extract has shown to contain oestrogenic substances and is effective in the treatment of menstrual disorders. Also it is very useful in digestive problems, as well as being an antiseptic which delays the intestinal fermentations. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展开 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展开 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展开 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展开 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| Valerian Root Extract 0.3% Valerenic Acids (HPLC) | Monteloeder S.L. | Valerian Root Extract 0.3% Valerenic Acids is an extract derived from roots of Valeriana officinalis L. This product is standardized for 0.3% Valerenic acid. This Valerian Extract is effective treatment in both sleep problems, like anxiety and distress. | |
| Valerian Root Extract 0.8% Valerenic Acids (HPLC) | Monteloeder S.L. | Valerian Root Extract 0.8% Valerenic Acids is an extract derived from roots of Valeriana officinalis L. This product is standardized for 0.8% Valerenic Acids (as Valerenic Acid). This Valerian Extract is effective treatment in both sleep problems, like an...展开 Valerian Root Extract 0.8% Valerenic Acids is an extract derived from roots of Valeriana officinalis L. This product is standardized for 0.8% Valerenic Acids (as Valerenic Acid). This Valerian Extract is effective treatment in both sleep problems, like anxiety and distress. 收起 | |
| White Willow Bark Extract 2% Salicins (HPLC) | Monteloeder S.L. | White Willow Bark Extract 2% Salicins is an extract derived from bark of Salix alba. This product is standardized for 2% Salicins. This White Willow Extract has anti-inflammatory effects and helps to treatmets of headache, fever and minor articular pain. |
