UL Prospector

成功!

成功保存搜索结果
A-K Polyol Futaste A-K Polyol is a white crystalline powder with a strong sweet taste that is about 200 times stronger than sucrose. It is odorless, non-moisture absorbing, and good stability when heating or reacting with acid. A-K Polyol can be used in food production inst...展开 A-K Polyol is a white crystalline powder with a strong sweet taste that is about 200 times stronger than sucrose. It is odorless, non-moisture absorbing, and good stability when heating or reacting with acid. A-K Polyol can be used in food production instead of sucrose without any change in flavor. It can be consumed by diabetic and obese individuals instead of other sugars. It can also be used in the pharmacy field to make sugar coating and syrup. This product can be used in drinks, ice cream, cakes, confectionery, jam & jelly, pickles, gums, yogurt, seasoning, and breads. 收起
BLUESIL RTV 1556 A Elkem Silicones BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起
BLUESIL RTV 1556 FC B Elkem Silicones BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起
BLUESIL RTV 3428 A Elkem Silicones BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat.
BLUESIL RTV 3536 P A Elkem Silicones ​BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material.
Benzoic Acid Shandong Oceanchem Benzoic Acid is a white scaly or needle-like crystal. It has a slight odor of benzoin or benzaldehyde and has a relative density of 1.316. It is used as a preservative or an antimicrobial agent in bread, cake, chocolate products, jams and jellies, cheese,...展开 Benzoic Acid is a white scaly or needle-like crystal. It has a slight odor of benzoin or benzaldehyde and has a relative density of 1.316. It is used as a preservative or an antimicrobial agent in bread, cake, chocolate products, jams and jellies, cheese, and candy. 收起
Betapol® IOI Loders Croklaan Americas Betapol® is the natural standard for high quality infant formula products. It is high in OPO-type fats and/or SN-2 palmitate. It has established an extensive safety record after 20 years on the market.
Biscuitine® IOI Loders Croklaan Americas Biscuitine® is a lipid that provides all-round flexibility in the development and production of filled chocolate confectionery and different bakery products. Biscuitine® combines good eating characteristics with flexibility in the use of different ingredi...展开 Biscuitine® is a lipid that provides all-round flexibility in the development and production of filled chocolate confectionery and different bakery products. Biscuitine® combines good eating characteristics with flexibility in the use of different ingredients and easy processing. 收起
CLSP® IOI Loders Croklaan Americas CLSP® range of lauric fats consists of Cocoa Butter Substitutes filling fats and dairy replacers. This product provides excellent eating characteristics and easy processing. Applications include bakery, bakery filling fat and confectionery.
Calcium Propionate Shandong Oceanchem Calcium Propionate is a white crystal or crystalline powder that is either odorless or has a slight odor of propionic acid. It is used as a preservative and an anti-fungal agent in bread, cakes, chocolate products, jams and jellies, candy, and cheese.
Citric Acid Anhydrous/Monohydrate Shandong Oceanchem Citric Acid Anhydrous/Monohydrate is a colorless or white crystalline powder. It is an organic acid that is widely used as a natural preservative and is often used to add an acidic, or sour taste to foods and soft drinks. It can also be used as an acidula...展开 Citric Acid Anhydrous/Monohydrate is a colorless or white crystalline powder. It is an organic acid that is widely used as a natural preservative and is often used to add an acidic, or sour taste to foods and soft drinks. It can also be used as an acidulant and flavorant in jams, jellies, and candy. 收起
Coberine® IOI Loders Croklaan Americas Coberine® is a cocoa butter equivalent (CBE) and provides cost efficiency and stability in the production of your chocolate and coated products.
Corn Starch Futaste Corn Starch is a white powder obtained from corn through soaking, crushing, seperation, purification, and drying. This product can be the starting point for other products like, glucose syrup, dextrose, acid citric, monosodium glutamate, maltodextrin, and...展开 Corn Starch is a white powder obtained from corn through soaking, crushing, seperation, purification, and drying. This product can be the starting point for other products like, glucose syrup, dextrose, acid citric, monosodium glutamate, maltodextrin, and modified starch. Corn Starch is used in the food industry for meats, beer, and gourmet powders. 收起
Couva® IOI Loders Croklaan Americas Couva® is a cocoa butter replacer (CBR) that provides maximum processing convenience in the preparation of confectionery and bakery coatings with maximum chocolate flavor. It enables you to benefit from the processing characteristics at a nutritional prof...展开 Couva® is a cocoa butter replacer (CBR) that provides maximum processing convenience in the preparation of confectionery and bakery coatings with maximum chocolate flavor. It enables you to benefit from the processing characteristics at a nutritional profile that meets today's demands. 收起
Creamelt® IOI Loders Croklaan Americas Creamelt® filling fats provide excellent eating characteristics for ultimate indulgence in chocolate confectionery. It is fully compatible with cocoa butter and provides an intense and long lasting release of the flavors of the other ingredients. Cool mel...展开 Creamelt® filling fats provide excellent eating characteristics for ultimate indulgence in chocolate confectionery. It is fully compatible with cocoa butter and provides an intense and long lasting release of the flavors of the other ingredients. Cool melting chocolate confectionery can also be produced with Creamelt®. 收起
Crystalline Fructose Futaste Crystalline Fructose is a white crystallized powder with a sweet taste, tasting twice as sweet as sucrose. It can replace sucrose in canned fruit, and can also be used in carbonated beverages and yogurts as a sweetener or in combination with sucrose. This...展开 Crystalline Fructose is a white crystallized powder with a sweet taste, tasting twice as sweet as sucrose. It can replace sucrose in canned fruit, and can also be used in carbonated beverages and yogurts as a sweetener or in combination with sucrose. This product can also be applied in breads, cakes, creams, marmalades, and chocolate. This product is typically used as a replacement for high-fructose corn syrup and table sugar. 收起
D-Xylose Futaste D-Xylose is a white crystalline or white crystalline powder that has the same sweet flavor as glucose and dissolves easily in water. It can improve the flavor of normal sweet foods and can inhibit odors. It satisfies those who like sweet but worry about w...展开 D-Xylose is a white crystalline or white crystalline powder that has the same sweet flavor as glucose and dissolves easily in water. It can improve the flavor of normal sweet foods and can inhibit odors. It satisfies those who like sweet but worry about weight control. This product has a similar function to dietary fiber. 收起
Dehydroacetic Acid Shandong Oceanchem Dehydroacetic Acid is a colorless to white needle or slaty crystal or crystalline powder. It is odorless but has a sourness and is easily soluble in fixed alkali solution. This product is used as a preservative to inhibit the growth of mold and yeast in c...展开 Dehydroacetic Acid is a colorless to white needle or slaty crystal or crystalline powder. It is odorless but has a sourness and is easily soluble in fixed alkali solution. This product is used as a preservative to inhibit the growth of mold and yeast in cut or peeled squash. 收起
Dextrose Monohydrate Futaste Dextrose Monohydrate is a white powder with a sweet taste. This product is used as a sweetener replacement to cane sugar. Dextrose Monohydrate can be used in the food industry to fortify color, add flavor, and prolong shelf life.
Dulcitol Futaste Dulcitol is also called Euonymus alcohol or Galactitol and is a colorless, columnar monoclinic crystalline powder. It taste slightly sweet and is difficult to dissolve in cold water or alcohol, but easily dissolves in boiling water. Dulcitol belongs to bi...展开 Dulcitol is also called Euonymus alcohol or Galactitol and is a colorless, columnar monoclinic crystalline powder. It taste slightly sweet and is difficult to dissolve in cold water or alcohol, but easily dissolves in boiling water. Dulcitol belongs to biochemical reagents, and is mainly used in bacterial identification and medium formula and is a necessary and important sugar alcohol for microbe research, the prevention, and the treatment of disease. Dulcitol can be used for shaping medicine to improve the appearance and stability of the tablets. Injections of Dulcitol are important in medicine for curing Rheumatoid and anti-leukemic. 收起
Durkex® IOI Loders Croklaan Americas Durkex® high stability oils enable the production of many high quality food products, such as soft chocolate and bakery fillings, soups and sauces and sultanas. This product combines good eating characteristics with high stability to ensure an optimal con...展开 Durkex® high stability oils enable the production of many high quality food products, such as soft chocolate and bakery fillings, soups and sauces and sultanas. This product combines good eating characteristics with high stability to ensure an optimal consumer experience throughout the shelf life. 收起
Erythritol Futaste Erythritol is a natural and healthy polyol, white crystalline product. It widely exists in fruit and fermented food in low content. It has distinct characteristics of being a natural, low calorie, anti-cariogenic, non-moisture absorption, high stability a...展开 Erythritol is a natural and healthy polyol, white crystalline product. It widely exists in fruit and fermented food in low content. It has distinct characteristics of being a natural, low calorie, anti-cariogenic, non-moisture absorption, high stability and quick absorption. This product can be used to sweetened drinks, bakery food, meat flavoring or seasoning, and confectionery. 收起
Food Grade Zinc Oxide Shandong Oceanchem Food Grade Zinc Oxide is a white powder that is used to add zinc to foods. It can be used in the production of soft drinks, dairy products, healthy products, and supplementary zinc products.
Glucose Syrup Futaste Glucose Syrup is a colorless and transparent viscous liquid with a soft sweet taste. This product is made from corn starch with maltose. Glucose Syrup is widely used in the food industry for the production of candy, soft drinks, and frozen foods.
Injection Grade Dextrose Anhydrous Futaste Injection Grade Dextrose Anhydrous is a white crystalline powder with a sweet taste. This product is soluble in water and sparingly soluble in alcohol. Dextrose anhydrous is used in the food industry as a substitute for sacharose and as an additive to pro...展开 Injection Grade Dextrose Anhydrous is a white crystalline powder with a sweet taste. This product is soluble in water and sparingly soluble in alcohol. Dextrose anhydrous is used in the food industry as a substitute for sacharose and as an additive to provide energy. 收起
Isomalt Futaste Isomalt is also called Palatinitol or Longevity Sugar. It uses sucrose as raw material Isomalt is 0.5 - 0.6 times as sweet as sucrose and does not have any bitter after taste. Isomalt is used as a sweetener in confectionery, drinks, chocolate, gums, ice c...展开 Isomalt is also called Palatinitol or Longevity Sugar. It uses sucrose as raw material Isomalt is 0.5 - 0.6 times as sweet as sucrose and does not have any bitter after taste. Isomalt is used as a sweetener in confectionery, drinks, chocolate, gums, ice cream, jelly & jam, cake, daubing food/paste, and table-use sweet flavoring. It is safe for use by diabetics, is low in calories, and does not absorb moisture. 收起
L-Arabinose Futaste L-Arabinose is a monosaccharide, and widely exists in plants, and normally combined with other monosaccharide to be changed to polysaccharide in existing mucus, hemicellulose, pectin acid, bacterial polysaccharide and other indicans. L-Arabinose is a non-...展开 L-Arabinose is a monosaccharide, and widely exists in plants, and normally combined with other monosaccharide to be changed to polysaccharide in existing mucus, hemicellulose, pectin acid, bacterial polysaccharide and other indicans. L-Arabinose is a non-calorie natural compound sweetener. It is beneficial to anti-obesity prevention and an aid for high blood sugar in diabetes patients. 收起
Maize Protein Futaste Maize Protein is the byproduct of corn starch, it is nutritious, helpful for anti-disease of livestock and also a good additive used in the stock breeding and feeding stuff industry. Maize protein can also extract a natural yellow color and different kind...展开 Maize Protein is the byproduct of corn starch, it is nutritious, helpful for anti-disease of livestock and also a good additive used in the stock breeding and feeding stuff industry. Maize protein can also extract a natural yellow color and different kinds of amino phenol. This product can be used to extract edible pigment, to be the substrate in the fermentation industry, and used to produce high quality feeding stuff for fish and poultry. 收起
Maltitol Futaste Maltitol is a white crystalline powder or colorless transparent neutral sticky liquid and is made from maltose after hydration. This product easily dissolves in water, has a similar sweetness to sucrose and is without an after taste, and has great moistur...展开 Maltitol is a white crystalline powder or colorless transparent neutral sticky liquid and is made from maltose after hydration. This product easily dissolves in water, has a similar sweetness to sucrose and is without an after taste, and has great moisture retention. Maltitol can be used in functional food, confectionery and chocolate, fruit juice drinks, and frozen food. 收起
Maltodextrin Futaste Maltodextrin is a white or light yellow powder made from refined corn starch. This product is used to improve the overall shape and structure of the food while having a good stability rating. Maltodextrin can be used in the confectionery industry and the ...展开 Maltodextrin is a white or light yellow powder made from refined corn starch. This product is used to improve the overall shape and structure of the food while having a good stability rating. Maltodextrin can be used in the confectionery industry and the beverage industry to add more flavor and to reduce the sweet taste and cost. 收起
Potassium Benzoate Shandong Oceanchem Potassium Benzoate is a white granule, flaky or crystalline powder. It is an almost odorless product. This product is used as a preservative or antimicrobial agent in cheese, fruit juices, sparking drinks, and soft drinks.
Potassium Sorbate Shandong Oceanchem Potassium Sorbate is a white granular product. It has a toxicity level comparable to table salt and helps inhibit growth of yeast and mold. This product is used as a food preservative in such foods as cheese, wine, meats and dried fruits.
SILBIONE CAF 72576 RED Elkem Silicones SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起
SILBIONE CAF 72589 Elkem Silicones SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起
SILBIONE DISPERSION CAF 70004 Elkem Silicones SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起
SILBIONE DISPERSION CAF 71500 GRY Elkem Silicones SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起
SILBIONE DISPERSION CAF 71528 Elkem Silicones SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起
SILBIONE DISPERSION CAF 71550 Elkem Silicones SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起
SILBIONE FLD 70047V100 Elkem Silicones SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES.
SILBIONE FLD 70047V12 500 Elkem Silicones SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications.
SILBIONE FLD 70047V30 000 Elkem Silicones SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications.
SILBIONE FLD 70047V300 000 Elkem Silicones SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications.
SILBIONE PASTE 70428 Elkem Silicones SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展开 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起
SILBIONE PRIM 70073 Elkem Silicones SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers).
SILBIONE RES 76405 Elkem Silicones SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起
SILCOLAPSE 710 Elkem Silicones SILCOLAPSE 710 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and nonaqueous applications including those with incidental food contact as well as food processing appli...展开 SILCOLAPSE 710 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and nonaqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem. 收起
SILCOLAPSE 7140 Elkem Silicones SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展开 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起
SILCOLAPSE 721 Elkem Silicones SILCOLAPSE 721 is a non-ionic aqueous 10% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing app...展开 SILCOLAPSE 721 is a non-ionic aqueous 10% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem. 收起
SILCOLAPSE 722 Elkem Silicones SILCOLAPSE 722 is a non-ionic aqueous 20% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing app...展开 SILCOLAPSE 722 is a non-ionic aqueous 20% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem. 收起
SILCOLAPSE 723 Elkem Silicones ​SILCOLAPSE 723 is a non-ionic aqueous 30% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing ap...展开 ​SILCOLAPSE 723 is a non-ionic aqueous 30% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem. 收起
SILCOLEASE ADD 702 Elkem Silicones SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone.
SILCOLEASE EMUL RCA 954 Elkem Silicones SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起
SILCOLEASE EMULSION 902 Elkem Silicones SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起
SILCOLEASE EMULSION 907 Elkem Silicones SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起
SILCOLEASE EMULSION 908 Elkem Silicones SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起
SILCOLEASE EMULSION 912 Elkem Silicones SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起
SILCOLEASE EMULSION 915 Elkem Silicones SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起
SILCOLEASE EMULSION 925 Elkem Silicones SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起
SILCOLEASE EMULSION CATA 903 Elkem Silicones SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起
SILCOLEASE EMULSION CATA 909 Elkem Silicones SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起
SILCOLEASE EMULSION CATA 911 Elkem Silicones SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起
SILCOLEASE EMULSION XL 966 Elkem Silicones SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range.
SILCOLEASE EMULSION XL 968 Elkem Silicones SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range.
SILCOLEASE EMULSION XL 969 Elkem Silicones SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range.
SILCOLEASE HA 1 Elkem Silicones SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE  polyaddition or polycondensation release systems to improve hold-out of the silicone.
SILCOLEASE PC-105NXL Elkem Silicones ​SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging.  SILCOLEASE PC-105NXL is an e...展开 ​SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging.  SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added.  As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics.  A platinum catalyst emulsion is also required.  Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起
SILCOLEASE PC-107 Elkem Silicones SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker.  As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起
SILCOLEASE PC-107 NXL Elkem Silicones SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker.  As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起
SILCOLEASE PC-188 Elkem Silicones SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker.  As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起
SILCOLEASE PC-188NXL Elkem Silicones SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker.  As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起
SILCOLEASE PC-191 Elkem Silicones SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起
SILCOLEASE PC-195NXL Elkem Silicones SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起
SILCOLEASE PC-197 Elkem Silicones ​SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations.  SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 ​SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations.  SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起
SILCOLEASE PC-31 Elkem Silicones SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起
SILCOLEASE PC-868 Elkem Silicones SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展开 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起
SILCOLEASE PC-95 Elkem Silicones SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展开 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起
SILCOLEASE XL PC-50 Elkem Silicones SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起
Sodium Benzoate Shandong Oceanchem Sodium Benzoate is a white small granule or powder. It is either odorless or has a slight odor of benzoin. This product is used as a preservative in juices, jam, canned food, wine, candy, carbonated drinks, cake, etc.
Sodium Hydrogen Diacetate Shandong Oceanchem Sodium Hydrogen Diacetate is a white crystal with an acetic odor. It can easily absorb moisture and is easily soluble in water and adds sodium to foods. This product is widely used for food additives to impart a salt and vinegar flavor.
Sodium Propionate Shandong Oceanchem Sodium Propionate is a white crystal, granule or crystalline powder. It has an odorless or slight odor of propionic acid. This product can be used as a preservative or anti-fungal agent in cakes and cheese.
Sorbitol Futaste Sorbitol is a low calorie sweetener that has a good taste and is anti-cariogenic. It is good for producing kinds of low calorie, low sugar and low fat products. Sorbitol is also a moisturizer and stabilizer, besides being sweet. It can be used in confecti...展开 Sorbitol is a low calorie sweetener that has a good taste and is anti-cariogenic. It is good for producing kinds of low calorie, low sugar and low fat products. Sorbitol is also a moisturizer and stabilizer, besides being sweet. It can be used in confectionery, bakery foods, frozen dessert, biscuit, cake, sugar-coat and chocolate. It has one third less calories than sucrose, is anti-cariogenic, and anti-crystallization. 收起
Sterol Futaste Sterol is a kind of steroid that has a basic structure of cholestane, 3 β-hydroxide cholestanes, is one kind of saturated sec-alcohol or unsaturated sec-alcohol. The fat is extracted from the tissue of animals or plants by fat solvent. Sterol is ideally u...展开 Sterol is a kind of steroid that has a basic structure of cholestane, 3 β-hydroxide cholestanes, is one kind of saturated sec-alcohol or unsaturated sec-alcohol. The fat is extracted from the tissue of animals or plants by fat solvent. Sterol is ideally used for making corn bran. 收起
Xlyo-Oligosaccharide Futaste Xylo-Oligosaccharide is functional polymerization sugar that has its own distinct strong point. This product helps to reduce poisonous fermentation products and harmful bacteria enzyme generation, restrain pathogen and diarrhea, prevent constipation, prot...展开 Xylo-Oligosaccharide is functional polymerization sugar that has its own distinct strong point. This product helps to reduce poisonous fermentation products and harmful bacteria enzyme generation, restrain pathogen and diarrhea, prevent constipation, protect liver function, and reduce cholesterol in blood serum. It also helps to improve organism immunity and anti-cancer, reduce blood pressure, and promote the generation of many nutrients from organisms. Xylo-Oligosaccharide can be used in the food industry in meal, cakes, flavoring, desserts, canned foods and confectionery. It can be used in all kinds of drinks like yogurt, lactobacillus drinks, carbonate drinks and other acidity drinks. 收起
Xylitol Futaste Xylitol is has sweet as sucrose, with a caloric value that is the same as sucrose. This product is easily dissolved in water, slightly dissolvable in ethanol and methanol, and absorbs heat when dissolved. It provides a natural cooling sensation in the mou...展开 Xylitol is has sweet as sucrose, with a caloric value that is the same as sucrose. This product is easily dissolved in water, slightly dissolvable in ethanol and methanol, and absorbs heat when dissolved. It provides a natural cooling sensation in the mouth. This product can be used in foods and beverages as a substitute to sucrose, and is safe for diabetics. Xylitol is ideally used in gum, chewing gum, toffee, soft candy, jelly, chocolate, chewing tablets, soft drinks, milk, bread, preserved fruit, biscuit, yogurt, jam, and porridge. It helps to keep a longer and better sweet taste because of its non-fermentability by yeast. 收起