UL Prospector

成功!

成功保存搜索结果
2- ethyl Aluminum Hexahydric Zhejiang Zhongming Chemical Science and Technology Co., Ltd. 2- ethyl Aluminum Hexahydric is a white and light powder that is odorless, non-toxic, and inexplosive. It is insoluble in water, but soluble in organic hydrocarbon solvents. This product can be used as a thickener in printing inks and stabilizer in paints...展开 2- ethyl Aluminum Hexahydric is a white and light powder that is odorless, non-toxic, and inexplosive. It is insoluble in water, but soluble in organic hydrocarbon solvents. This product can be used as a thickener in printing inks and stabilizer in paints. 收起
ADDAPT® AS 400 ADDAPT Chemicals BV ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings.
Request Sample AERODISP® W 7330 N Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 AERODISP® W 7330 N是一种AEROSIL®气相二氧化硅的水性乳液,具有高固体份含量和碱性pH值。它适合用于透明和有色水性密封剂:有效的流变控制和增进剂,同时可维持高透明度,出色的颜料分散剂、易与丙烯酸、聚氨酯和其它水性乳胶混合
Request Sample AEROSIL® 200 Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 一种亲水气相二氧化硅,比表面积为200m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、食品和化妆品、电缆复合材料和凝胶、硅树脂橡胶,也用于工厂防护。
Request Sample AEROSIL® 300 Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 一种亲水气相二氧化硅,比表面积为300m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。
Request Sample AEROSIL® 380 Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 一种亲水气相二氧化硅,比表面积为380m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。
Request Sample AEROSIL® MOX 80 Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 AEROSIL® MOX 80是一种含二氧化硅和约1%氧化铝的混合氧化物,通过AEROSIL®工艺制备
Request Sample AEROSIL® R 816 Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 气相二氧化硅, 以Aerosil® 200为基础用十六烷基硅烷做后处理。 用于水性涂料。
Request Sample AEROSIL® R 972 Evonik Resource Efficiency GmbH, Silica 赢创二氧化硅 憎水性气相二氧化硅,经二甲基二氯硅烷处理,基于比表面积为130 m²/g的亲水性气相二氧化硅
AO-4-1 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-4-1 is a light yellow transparent liquid that has an aluminum content of 7.2±0.2%. This product is combustible, odorless, and easily soluble in benzene, xylene, toluene, etc. It is often used as a gelling agent in printing inks.
AO-4-2 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-4-2 is a light yellow transparent liquid that has an aluminum content of 5.7±0.2%. This product is combustible, odorless, and easily soluble in benzene, xylene, toluene, etc. It is often used as a gelling agent in printing inks.
AO-5-1 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-5-1 is a light yellow transparent liquid that has an aluminum content of 9.0±0.3%. This product is non-toxic, odorless, and easily soluble in alcohol, ketone, etc. It is often used as a gelling agent in printing inks.
AO-5-2 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-5-2 is a light yellow transparent liquid that has an aluminum content of 8.0±0.3%. This product is non-toxic, odorless, and easily soluble in alcohol, ketone, etc. It is often used as a gelling agent in printing inks.
AT-152 Antex Chemicals (Zhongshan) Limited AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...展开 AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. 收起
AT-166 Antex Chemicals (Zhongshan) Limited AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...展开 AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. 收起
AT-288 Antex Chemicals (Zhongshan) Limited AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...展开 AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. 收起
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
BK-127 LUKEM D.O.O. BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...展开 BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. 收起
BK-883 LUKEM D.O.O. BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...展开 BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. 收起
BK-923 LUKEM D.O.O. BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...展开 BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. 收起
BK®-127 Hangzhou Jingyi Chemical Co., Ltd. BK®-127 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, primer paint, and ink...展开 BK®-127 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, primer paint, and ink applications. 收起
BK®-138 Hangzhou Jingyi Chemical Co., Ltd. BK®-138 is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, alkyd paint, inks, and adhesive applications.
BK®-283 Hangzhou Jingyi Chemical Co., Ltd. BK®-283 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in ink and adhesive applications.
BK®-388 Hangzhou Jingyi Chemical Co., Ltd. BK®-388 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.85 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in decorative paint, industrial paint, and ink applications.
BK®-500 Hangzhou Jingyi Chemical Co., Ltd. BK®-500 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.5 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in alkyd paint, ink, and adhesive applications.
BK®-500A Hangzhou Jingyi Chemical Co., Ltd. BK®-500A is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.8 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, and ink applications...展开 BK®-500A is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.8 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, and ink applications. 收起
BK®-500B Hangzhou Jingyi Chemical Co., Ltd. BK®-500B is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.85 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in decorative paint, industrial paint, and ink applications.
BK®-883 Hangzhou Jingyi Chemical Co., Ltd. BK®-883 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, ink, and adhesive applications.
BK®-883B Hangzhou Jingyi Chemical Co., Ltd. BK®-883B is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive appli...展开 BK®-883B is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive applications. 收起
BK®-884 Hangzhou Jingyi Chemical Co., Ltd. BK®-884 is an organoclay that appears as a light white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, road paint, inks, and adhesive applicat...展开 BK®-884 is an organoclay that appears as a light white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, road paint, inks, and adhesive applications. 收起
BK®-884A Hangzhou Jingyi Chemical Co., Ltd. BK®-884A is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, wooden paint, inks, and adhesive applications...展开 BK®-884A is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, wooden paint, inks, and adhesive applications. 收起
BK®-886 Hangzhou Jingyi Chemical Co., Ltd. BK®-886 is an organoclay that appears as a light white, free-flowing powder. This product has a density of 1.67 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in alkyd paint, baking paint, inks, and adhesive applications.
BK®-886B Hangzhou Jingyi Chemical Co., Ltd. BK®-886B is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in alkyd paint, wooden paint, and ink applications.
BK®-886C Hangzhou Jingyi Chemical Co., Ltd. BK®-886C is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive appli...展开 BK®-886C is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive applications. 收起
BK®-886D Hangzhou Jingyi Chemical Co., Ltd. BK®-886D is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, inks, and adhesive applica...展开 BK®-886D is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, inks, and adhesive applications. 收起
BK®-922 Hangzhou Jingyi Chemical Co., Ltd. BK®-922 is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive applications.
BK®-923 Hangzhou Jingyi Chemical Co., Ltd. BK®-923 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, baking paint, inks, and adhesive applic...展开 BK®-923 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, baking paint, inks, and adhesive applications. 收起
BK–884A LUKEM D.O.O. BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...展开 BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. 收起
BP®-183 Zhejiang Huate New Material Co., Ltd. BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also comm...展开 BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also commonly used in mixed paints, paint fillers, sealants, and printing inks. 收起
BP®-183B Zhejiang Huate New Material Co., Ltd. BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is al...展开 BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is also commonly used in mixed paints, bitumen paints, chlorinated rubber paints, anticorrosion paints, epoxy paints, sealants, and printing inks. 收起
BP®-184 Zhejiang Huate New Material Co., Ltd. BP®-184 is a solvent based organoclay additive with rheological properties that appears as a white, free flowing powder in appearance. This product is easy to disperse, and is commonly used in sealants, high-grade paints, and printing inks.
BP®-186 Zhejiang Huate New Material Co., Ltd. BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and print...展开 BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. 收起
BP®-186B Zhejiang Huate New Material Co., Ltd. BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and prin...展开 BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. 收起
BP®-186C Zhejiang Huate New Material Co., Ltd. BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, an...展开 BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, and printing inks. 收起
BP®-186D Zhejiang Huate New Material Co., Ltd. BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing in...展开 BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing inks. 收起
BP®-188L Zhejiang Huate New Material Co., Ltd. BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white,...展开 BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white, free-flowing powder. It is commonly used in water-based ink, water-based coatings, and emulsion paints. 收起
BP®-283 Zhejiang Huate New Material Co., Ltd. BP®-283 is a tetraallkyl ammonium bentonite based organoclay used in solvent-based systems of low to medium polarity. This product is also used as an anti-sagging agent in inks and adhesives.
BP®-286 Zhejiang Huate New Material Co., Ltd. BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks...展开 BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks. 收起
BP®-500 Zhejiang Huate New Material Co., Ltd. BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is co...展开 BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is commonly applied in paints, coatings, inks, and adhesives. 收起
BP®-923 Zhejiang Huate New Material Co., Ltd. BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, a...展开 BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, anti-corrosion paints, and inks. 收起
CAB-O-SIL® EH5 Cabot Corporation - Additives CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展开 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起
CAB-O-SIL® TS610 Cabot Corporation - Additives CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...展开 CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. 收起
CAB-O-SPERSE® PG001 Cabot Corporation - Additives CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...展开 CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. 收起
Carboxymethyl Cellulose (CMC) Shijiazhuang Metal Billion Import&Export Co., Ltd. Carboxymethyl Cellulose (CMC), in the form of a white powder, is a binding agent. This product can be used in paints and printing applications. It can also be used as a coagulant and as an agent to retain water.
Claytone® 40 Byk 毕克 Claytone® 40是一种亲有机膨润土衍生物,用作触变增稠剂和抗沉降剂,用于低到中等极性溶剂型涂料。这是一个传统的有机粘土,需要添加活化剂以获取充分的效能。作为亲有机的蒙脱石产品,它可以在有机介质中溶胀,并建立一种凝胶结构(纸房状构造)。单蒙脱石片层之间的弱氢键是此触变凝胶结构的原因。为了获取最佳效率,片层的完全分离是必要的(附聚物解聚成初级粒子完全分散)。
Claytone® AF Byk 毕克 Claytone® AF是一种改性蒙脱石,用于含低到中等极性的脂肪族溶剂和脂肪族 - 芳香族溶剂混合物的体系。Claytone®产生可重复的黏度和触变控制,高程度流挂控制,并防止颜料沉降。Claytone® AF是自分散的,不需要极性活化剂。Claytone® AF无需高剪切力或预凝胶。
Claytone® APA Byk 毕克 Claytone® APA是一种改性蒙脱石,用于含中等到高极性的芳香族溶剂或芳香族氧化物溶剂混合物的体系。Claytone® APA具有高凝胶效率、可重复的黏度和触变控制,高程度流挂控制,并防止颜料和填料沉降。
Claytone® HT Byk 毕克 Claytone® HT是一种改性蒙脱石,用于含低到中等极性的芳香族溶剂和脂肪族溶剂的体系。Claytone® HT具有高凝胶效率、可重复的黏度和触变控制,高程度流挂控制,并防止颜料和填料沉降。本产品是一种高性能的流变助剂,用于在高性能的油性涂料,特别适合于工业、船舶和防护涂料。
Claytone® HY Byk 毕克 Claytone® HY是一种改性蒙脱石,用于低到中等极性的印刷油墨。Claytone® HY具有高凝胶效率、可增加黏度和屈服值,防止颜料聚集、沉降,减少起雾,并使油墨生产商可控制粘性粘度。
DA-40A Antex Chemicals (Zhongshan) Limited DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste.
DA-40N Antex Chemicals (Zhongshan) Limited DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste.
DISPERBYK®-2013 Byk 毕克 DISPERBYK®-2013是一种无溶剂的湿润和分散添加剂,用于打印油墨和涂料的100%防紫外线系统和溶剂型和水性UV系统。基于DISPERBYK®-2013均衡的产品极性和100%的输送形式,它可以实现优异的稳定性, 特别在100%防紫外线系统,特别是有机颜料和炭黑颜料。这款产品具有令人印象深刻且有效地减低粘度的效果,同时可以减少触变流动。
Decoflux DP R 12 Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...展开 Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起
Decoflux DP R 24 Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...展开 Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. 收起
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起
FR50 Sino-American Pigment Systems, Inc. FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起
FR52 Sino-American Pigment Systems, Inc. FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起
FR54 Sino-American Pigment Systems, Inc. FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起
FR56 Sino-American Pigment Systems, Inc. FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起
FR58 Sino-American Pigment Systems, Inc. FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起
FR60 Sino-American Pigment Systems, Inc. FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起
FR62 Sino-American Pigment Systems, Inc. FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起
FR64 Sino-American Pigment Systems, Inc. FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
HB-139 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...展开 HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. 收起
HB-615 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...展开 HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. 收起
HB-620 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...展开 HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. 收起
Request Sample HDK® H20 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产工业粉末时用作松散助剂。
Request Sample HDK® T30 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。
Request Sample HDK® T40 Wacker Chemie AG 瓦克化学 一种合成气相二氧化硅,在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料,在生产粉末物质时用作松散助剂。
HL-200 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...展开 HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起
HL-300 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展开 HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起
HL-380 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展开 HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起
HS971 Tianyi Chemical Engineering Material Co., Ltd. HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...展开 HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 收起
HS973 Tianyi Chemical Engineering Material Co., Ltd. HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...展开 HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 收起
HS975 Tianyi Chemical Engineering Material Co., Ltd. HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...展开 HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 收起
HX-5440 Zhuhai Huaxia Paint Co., Ltd. HX-5440, in the form of a white emulsion, is a hydrophobic modified alkali-active acrylate copolymer. This product is an associative rheological thickener that can be used in latex paints, water-based coatings, inks, and binders. It can associate with s...展开 HX-5440, in the form of a white emulsion, is a hydrophobic modified alkali-active acrylate copolymer. This product is an associative rheological thickener that can be used in latex paints, water-based coatings, inks, and binders. It can associate with surfactants, polymers, pigments and fillers in water-based systems, in order to increase film thickness. It can also prevent a coating from splashing and dripping while providing the coating flowing and leveling properties. This product is dispersible in water. 收起
HX-5500 Zhuhai Huaxia Paint Co., Ltd. HX-5500, in the form of a white emulsion, is an alkali-active acrylate copolymer that is easily dispersed in water. This product is a thickener for water-based systems that can be used in latex paints, water-based coatings, inks, and binders. It is desi...展开 HX-5500, in the form of a white emulsion, is an alkali-active acrylate copolymer that is easily dispersed in water. This product is a thickener for water-based systems that can be used in latex paints, water-based coatings, inks, and binders. It is designed for use in water-based systems with a pH value of 7.5-9 and offers more thickening and stabilization effects for latex paint than traditional alkali-soluble thickeners. 收起
HY-30 Lithium-Based Zhejiang Hongyu New Materials Co., Ltd. HY-30 Lithium-Based, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispers...展开 HY-30 Lithium-Based, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good stability, and compatibility. HY-30 Lithium-Based has recommended applications in inks, waterborne coatings, latex paint, ceramic glaze paint, and more. 收起
HY-30C Zhejiang Hongyu New Materials Co., Ltd. HY-30C, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, whide PH range, easy dispersion, good st...展开 HY-30C, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, whide PH range, easy dispersion, good stability, and compatibility. HY-30C has recommended applications in inks, waterborne coatings, latex paint, ceramic glaze paint, and more. 收起
HY-30E Zhejiang Hongyu New Materials Co., Ltd. HY-30E, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good sta...展开 HY-30E, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good stability, and compatibility. HY-30E has recommended applications in inks, waterborne coatings, latex paint, ceramic glaze paint, and more. 收起
HY-30EV Zhejiang Hongyu New Materials Co., Ltd. HY-30EV, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good st...展开 HY-30EV, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good stability, and compatibility. HY-30EV has recommended applications in inks, waterborne coatings, latex paint, ceramic glaze paint, and more. 收起
HY-EW-2 Zhejiang Hongyu New Materials Co., Ltd. HY-EW-2, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good st...展开 HY-EW-2, in the form of a gray-white powder, is a water-based bentonite rheological additive (inorganic gel) and is a kind of magnesium silicate, natural aluminum, and rheological additive. It has strong thixotropy, wide PH range, easy dispersion, good stability, and compatibility. HY-EW-2 has recommended applications in inks, waterborne coatings, latex paint, ceramic glaze paint, and more. 收起
Hakuenka® CCR-S10 Shiraishi-Omya GmbH Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...展开 Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. 收起
Hydrogenated Castor Oil HCO Changxing Xiehe Polymer Co., Ltd. Hydrogenated castor oil (HCO) is made ​​from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other...展开 Hydrogenated castor oil (HCO) is made ​​from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other industries. 收起