UL Prospector
Prospector
基料 / 树脂~环氧树脂 

成功!

成功保存搜索结果
64 条结果
ANCAREZ® AR555 Waterborne Epoxy Resin Evonik Operations GmbH, BL Crosslinkers ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 Request Sample
BECKOPOX™ EM 2120w/45WA Allnex BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...展开 BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. 收起 Request Sample
BECKOPOX™ EM 460/60IBX Allnex 对于钢铁和非铁金属具有出色的附着力，高防腐保护性能和最佳的重涂性 Request Sample
BECKOPOX™ EP 116 Allnex Beckopox® EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds. Request Sample
BECKOPOX™ EP 117 Allnex Beckopox® EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds. Request Sample
BECKOPOX™ EP 128 Allnex 低粘度，液体环氧树脂，反应性稀释 Request Sample
BECKOPOX™ EP 140 Allnex 液体树脂，具有高耐化学品性能，用于涂料、胶粘剂、抹灰、浇铸和层合材料 Request Sample
BECKOPOX™ EP 140/80SNB Allnex 液体环氧树脂 Request Sample
BECKOPOX™ EP 147w Allnex 100％固体含可水稀释环氧的反应性表面活性剂 Request Sample
BECKOPOX™ EP 2340w/56WA Allnex BECKOPOX® EP 2340W/56WA is serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. Request Sample
BECKOPOX™ EP 2350w/60WA Allnex Beckopox® EP 2350W/60WA is a solid epoxy resin dispersion in water with improved chemical resistance. Request Sample
BECKOPOX™ EP 2384w/57WA Allnex Beckopox EP 2384w是一款A剂固体环氧树脂的水分散液。可以和 Beckopox EH 623w, EH 659w, VEH 2188w , VEH 2177w 等环氧固化剂配套使用，适合金属或矿物表面。其快干特性让在一天内进行多次涂层施工成为可能。 Request Sample
BECKOPOX™ EP 2392w/70MP Allnex Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate ...展开 Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate anticorrosive primers, singular topcoats, due to its water-free form of delivery this product is very well suited for processing of water-sensitive pigments like zinc dust, such zinc-rich primers exhibit outstanding anti-corrosive properties. 收起 Request Sample
BECKOPOX™ EP 301/75X Allnex 用于溶剂型涂料，具有良好的耐化学品和耐腐蚀性能，包括镀锌涂料和高耐候涂料 Request Sample
BECKOPOX™ EP 384w/53WAMP Allnex 固体树脂－1类－乳液，可结合可用水乳化的液体树脂用于快干涂料，更适合应用于矿物底材 Request Sample
BECKOPOX™ EP 385w/56WA Allnex 固体环氧树脂，柔韧，可分散于水中。配方对于各种塑胶PC, PA, PUR和UP-层合材料具有良好的附着力 Request Sample
BECKOPOX™ EP 386w/52WA Allnex 内部增塑的固体树脂－1类乳液，具有改善的剪切稳定性，例如用于水性快干抗腐蚀塑胶底漆和涂料 Request Sample
BECKOPOX™ EP 387w/52WA Allnex BECKOPOX® EP 387w/52WA是一个柔韧的固体环氧树脂。它适用于腐蚀保护底漆，对大多数金属基材具有非常好的附着力。它也适用于金属基材的单涂层和装饰体系。为了优化防腐蚀保护性能，推荐固化剂量为75％，按化学计量。 Request Sample
BECKOPOX™ VEM 2448/50EEP Allnex Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstan...展开 Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances. 收起 Request Sample
BECKOPOX™ VEP 2381w/55WA Allnex 环氧水性乳液，1001型环氧乳液，用于水性面漆、底漆和DTM涂料 Request Sample
BECKOPOX™ VEP 2382w/55WA Allnex 环氧水性乳液 Request Sample
Bisphenol A Epoxy Diacrylate SM6104 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6104是标准双酚A环氧丙烯酸酯。它带来低粘度与浅色，并且提供高光泽，硬度和优良的耐化学性。本产品广泛应用于紫外线涂料、油墨和粘合剂等。
DUROXYN® EF 2107w/45WA Allnex DUROXYN® EF 2107W/45WA is an aqueous, cationic epoxy-resin ester developed for the production of 1-comp.-primers, with quick drying and high film hardness. Request Sample
DUROXYN® EF 900/60X Allnex Duroxyn ®EF 900/60X是一种自干和烘干环氧树脂酯，可用于防腐涂料体系和底漆以及富锌涂料。 Request Sample
DUROXYN® EF 935/60X Allnex Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying ...展开 Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying and stoving anticorrosive primers. 收起 Request Sample
DUROXYN® SEF 968w Allnex Duroxyn® SEF 968w is a non-drying epoxy-resin-ester. It is used as binder for glass fibre sizing. It is processed as approx. 33 % emulsion in water. For production of the emulsion Duroxyn SEF 968w is heated up at a temperature of approx. 50 °C. Request Sample
DUROXYN® SEF 968w/25WA Allnex DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...展开 DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. 收起 Request Sample
DUROXYN® VAX 6127w/42WA Allnex 氧化干燥的环氧树脂，以水性乳胶形式存在。具有出色的抗腐蚀性能，高水稳定性，良好的重涂性能 Request Sample
DUROXYN® VEF 2406w/45WA Allnex 水性阳离子环氧树脂酯，用于生产单组分底漆，具有快干性和高涂膜硬度 Request Sample
DUROXYN® VEF 4380w/35WA Allnex Duroxyn® VEF 4380W/35WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings. Request Sample
EBECRYL® 4266 Allnex EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB c...展开 EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film. 收起 Request Sample
EBECRYL® 606 Allnex EBECRYL® 606 is a modified diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light colour, fast cure response and improved pigment wetting. Films of EBECRYL 606 cured by ultraviolet light (UV) or electron beam (EB) exhibit ...展开 EBECRYL® 606 is a modified diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light colour, fast cure response and improved pigment wetting. Films of EBECRYL 606 cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. EBECRYL 606 finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes. 收起 Request Sample
Epoxy Acrylate SE 147 Soltech Ltd Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...展开 Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起
Epoxy Acrylate SE 1605 Soltech Ltd Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...展开 Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. 收起
EPOXY METHACRYLATE 97-053 Rahn AG 双酚A环氧二甲基丙烯酸酯。用作自由基固化油墨、涂料和粘胶的树脂。 Request Sample
Epoxy Resin SM828 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM828是未稀释的透明双酚A/环氧氯丙烷衍生的液体环氧树脂。它是一种广泛通用的液体环氧树脂。这款产品被认为是开发很多具有变化的产品的标准。它推荐用于粘合剂，船舶漆和防护漆，罐装涂料和线圈涂料，汽车涂料等。
Functional O-Cresol Novalac Epoxy Resin Suny Chem 烟台信谊化工有限公司 酚醛环氧树脂是由线性酚醛树脂与 ECH 在碱性介质中反应得聚合物，与双酚 A 型环氧树脂相比，其具有酚醛树脂的耐热性，耐腐蚀等特点，有具有环氧树脂粘结性好，机械物理性能，电器绝缘性能好的特点。该酚醛环氧树脂已广泛用于绝缘材料层压制品，防腐涂层特种的耐热材料。用于电气，电气塑封的主要粘结材料，又用于光固化油墨，及民用弱电等。
GENOMER* 2235 Rahn AG 它是一种低黏度脂肪族环氧二丙烯酸酯树脂，用于快速固化油墨、涂料和粘胶。 Request Sample
GENOMER* 2252 Rahn AG GENOMER 2252是一种双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 Request Sample
GENOMER* 2252/GP25 Rahn AG GENOMER* 2252/GP25 is a Bisphenol A epoxy diacrylate in 25% GPTA. It is a resin for radically curable inks, coatings and adhesives. Request Sample
GENOMER* 2252/TM20 Rahn AG GENOMER 2252/TM20是一种20%TMPTA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 Request Sample
GENOMER* 2252/TP20 Rahn AG GENOMER 2252/TP20是一种20%TPGDA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 Request Sample
GENOMER* 2252/TP30 Rahn AG GENOMER 2252/TP30是一种30%TPGDA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 Request Sample
GENOMER* 2252/TP40 Rahn AG GENOMER 2252/TP40是一种40%TPGDA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 Request Sample
GENOMER* 2253 Rahn AG 改性乙烯基树脂。用于自由基固化油墨、涂料和粘胶的活性稀释剂。 Request Sample
GENOMER* 2259 Rahn AG 改性乙烯基树脂。用于自由基固化油墨、涂料和粘胶的树脂。 Request Sample
GENOMER* 2263 Rahn AG 乙烯基树脂。用于自由基固化油墨、涂料和粘胶。 Request Sample
GENOMER* 2280 Rahn AG GENOMER* 2280是一种改性双酚A环氧二丙烯酸脂。这中树脂适用于自由基固化油墨、涂料和粘胶。与标准双酚A丙烯酸脂相比，GENOMER* 2280具有更高的弹性和韧性，保持了快速固化响应、高抵抗力和高硬度的特性。 Request Sample
R-1008-0 NuSil Silicone Technology 1 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...展开 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起
RESYDROL® AX 237w/70BG Allnex 可水稀释的氧化干燥环氧树脂酯。自干型抗腐蚀保护涂料的单一基料 Request Sample
RESYDROL® AX 246w/70BG Allnex 环氧树脂改性的非干性醇酸树脂，用胺中和后可用水稀释 Request Sample
RESYDROL® AX 247w/70BGMP Allnex 环氧树脂改性的非干性醇酸树脂，用胺中和后可用水稀释 Request Sample
RESYDROL® AX 250w/75EP Allnex Resydrol® AX 250W/75EP is a water dilutable, fatty acid modified epoxy resin ester. It has excellent pigment wetting, high corrosion protection, and very good reactivity with melamine resins. Request Sample
RESYDROL® AX 906w/35WA Allnex 水性，环氧树脂改性，无油，醇酸树脂。具有杰出的耐腐蚀性，出色的颜料润湿性，高反应活性以及非常好的储存稳定性 Request Sample
SETAL® 0405 Allnex SETAL® 0405 is a long oil linseed fatty acid based epoxy ester targeting Deco DTM applications in blends with LOAs and Urethane alkyds Request Sample
SETAL® 0440/60X Allnex SETAL 0440-60X is a dehydrogenated castor oil based epoxy ester with excellent adhesion and resistance to a wide range of solvents. Request Sample
SETAL® 212 Allnex SETAL 212 exhibits outstanding flexibility, excellent alkali- and abrasion resistance, and produces tough, non-yellowing, chemical-resistant coatings. Request Sample
SETAL® 690 Allnex SETAL® 690 is a water reduceable acrylated epoxy ester which has good compatability with acrylic emulsions and used to formulate metal primers and enamels, both air dry and baking systems. Request Sample
SILIKOPON® EF Evonik Operations GmbH, BL Coating Additives SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...展开 SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. 收起 Request Sample
TTA26 Jiangsu Tetrachem Co., Ltd. TTA26 is a clear yellow colored liquid and the chemical name is 3,4-Epoxycyclohexylmethyl. This product is generally used with polyacid and anhydride cures. It is similar to TTA21 in electrical and weathering resistance but provides more flexibility. TTA2...展开 TTA26 is a clear yellow colored liquid and the chemical name is 3,4-Epoxycyclohexylmethyl. This product is generally used with polyacid and anhydride cures. It is similar to TTA21 in electrical and weathering resistance but provides more flexibility. TTA26 is primarily used in coatings to protect weather resistance, optical adhesives and UV-curing printing inks. 收起
Uvi-Cure S105E Lambson Group Ltd. UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators.
Uvi-Cure S110-LV Lambson Group Ltd. Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起
Uvi-Cure S128 Lambson Group Ltd. UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators.
UviCure S105 Lambson Group Ltd. UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators.