| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...展开 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加剂，可控制油墨中的水粘附性。可用于平版印刷油墨 | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加剂，可控制平版印刷油墨中的水粘附性。由于它的高粘度，它对油墨几乎没有稀释效果 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 25%氧化聚乙烯蜡乳液，分散于TRPGDA中，用于UV固化油墨和涂料。可提供滑爽度和过渡耐磨性能，并维持原有的光泽和透明度 | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 低分子量聚乙烯和聚四氟乙烯混合物。用于溶剂型和水性油墨 | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 细粒径的高分子量聚乙烯和聚四氟乙烯混合物，可为配方提供出色的耐磨性和良好的滑爽度。用于胶印、UV和铁皮印刷油墨和套印清漆 | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 高分子量聚乙烯和聚四氟乙烯混合物，可提供较好的耐摩擦，耐磨和抗磨损性能，不提供滑爽度 | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 细微粉化，高熔点蜡合金粉末和聚四氟乙烯混合物。可增加润滑度、硬度、抗粘连性能和抗磨损以及耐磨性能。应用于溶剂型和水性油墨中 | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 稳定的50%微粉化聚四氟乙烯乳液，用于通用型平版印刷油墨体系。用于热固平版印刷油墨。可结合聚乙烯提高抗磨损性能 | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. 三叶科技 | 50%水性低分子量聚乙烯蜡乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%水性高分子量聚乙烯蜡乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | 水性50%固体石蜡微粒分散乳液。用于水性油墨和涂料中，可提供良好的表面滑爽度和憎水性。 | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 阴离子，高密度聚乙烯乳液。可改善水性油墨、涂料和套印清漆的耐磨性能和滑爽度。也可大大改善抗划伤和耐胶印性能，以及滑动角结果 | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 石蜡的水性乳液。用于水性油墨和涂料中，具有出色的耐水性 | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 非离子型聚丙烯乳液。推荐作为水性油墨和涂料的防滑剂 | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1 N1是一种中等分子量的聚乙烯蜡。具有出色的滑爽性及良好的耐磨损性和耐指甲划伤性能。在配方中极其稳定，有助于防止消泡剂析出。 | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 氧化聚乙烯蜡。易分散于水性体系中，产生最少的泡沫。用于水性油墨 | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | 高级结晶PTFE，在干混阶段加入，随后挤出。可产生丝光桔皮纹理效果。 | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | 一种纯聚四氟乙烯，用作粉末涂料的质地改进剂。即便在低浓度的情况下，也可使涂料呈现一种持续的、均匀的和可重现的低光质地。 | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展开 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展开 RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展开 RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展开 RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展开 RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展开 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展开 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展开 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展开 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展开 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展开 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展开 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展开 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展开 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | 微粉化聚丙烯蜡合金，是一种消光剂，并可提供出色的耐磨、抗磨损性能，以及抗金属印记或指甲划伤的性能 | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 经济型可直接搅拌添加的蜡，可提供良好的滑爽度和耐摩擦性能。它是一种合成聚乙烯蜡，具有典型的直链分子结构。用于液体和浆状油墨中 | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | 一种微粉化聚乙烯蜡混合物。可以搅拌到涂料中，产生丝光或无光饰面的效果，并带有出色的滑爽性和耐磨性。可用作去光剂，提高抗磨光的性能。 | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-MG (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394-MG is a polyethylene wax with a DSC melt peak above 110°C. S-394-MG is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 聚乙烯蜡粉末，用于各种油墨和涂料，具有窄的熔融温度范围和低溶解度。可用于液体和浆状油墨 | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 聚乙烯蜡粉末，用于各种油墨和涂料，具有窄的熔融温度范围和低溶解度。可用于液体和浆状油墨 | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N2 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-395-N2 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 结晶聚乙烯，具有高熔点和出色的不溶性。用于溶剂型油墨和套印清漆 | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 结晶聚乙烯，具有高熔点和出色的不溶性。用于出版物凹印油墨和其它液体油墨 | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蜡粉末，适合薄膜应用场合。用于溶剂型油墨中 | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蜡粉末，适合薄膜应用场合。用于溶剂型油墨中 | |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蜡粉末，适合薄膜应用场合。用于溶剂型油墨中 | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 高分子量球形聚乙烯蜡。用于溶剂型苯胺和凹印油墨 | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-25 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-25 is an isotactic polypropylene with a mean particle size of 25 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | 微粉化PTFE粉末。用于印刷油墨 | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in offset and liquid inks. | |
| SST®-2P (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-2P is a low MW PTFE powder (off-white) with a particle size mean value of 8.0 µm. SST®-2P is recommended for use in offset and liquid inks. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | 微粉化PTFE粉末，具有合适的粒径和窄的分布，利于生产控制并增加性能。用于轮转式印刷、单张纸平版印刷和铁皮印刷油墨 | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommended for use in offset and liquid inks. | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is recommended for use in offset and liquid inks. | |
| SST®-3PS (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-3PS is a sintered low MW PTFE powder (charcoal gray colored) with a particle size mean value of 5.0 µm. SST®-3PS is recommended in offset and liquid inks. |
