| ADDAPT® Anticor™ A40 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...展开 ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...展开 ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...展开 ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. 收起 | |
| ADDAPT® Anticor™ L 4783 | ADDAPT Chemicals BV | ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...展开 ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. 收起 | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 200R | ADDAPT Chemicals BV | ADDAPT® BioWet™ 200R is a polyhydroxy amide in water. It is used as a compatibilizer and pigment dispersant in coatings and printing inks. This product is solvent-free, biodegradable, non-foaming, and improves pigment grinding. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...展开 ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...展开 ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...展开 ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 60G | ADDAPT Chemicals BV | ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G ...展开 ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G is non-foaming, biodegradable, and completely soluble in water. 收起 | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...展开 ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. 收起 | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...展开 ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. 收起 | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...展开 ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...展开 ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...展开 ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...展开 ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective ...展开 ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. 收起 | |
| ADDAPT® Foamstop™ 200N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegrada...展开 ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegradable. 收起 | |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展开 ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展开 ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...展开 ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective o...展开 ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. 收起 | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...展开 ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...展开 ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 33 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 33 is a proprietary blend of polyalkyleneglycols and siloxane based surface-active components. It is used as a foam control agent in paint, printing ink, PVC production, textiles, and lubricants. | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...展开 ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 55 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range an...展开 ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, textiles, and lubricants. 收起 | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...展开 ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 92 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effectiv...展开 ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, food processing, and lubricants. 收起 | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...展开 ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cuttin...展开 ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. 收起 | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...展开 ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...展开 ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...展开 ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. 收起 | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...展开 ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. 收起 | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...展开 ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...展开 ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. 收起 | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...展开 ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...展开 ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...展开 ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. 收起 | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...展开 ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. 收起 | |
| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...展开 ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. 收起 | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...展开 ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. 收起 | |
| Addaptol™ DB | ADDAPT Chemicals BV | Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanedi...展开 Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanediol mono-isobutyrate, Addaptol™ DB has less odor, improved wet scrub resistance, and improved leveling and pinhole resistance. 收起 | |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| BM52 | Pioneer Chemicals Co., Ltd. | BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...展开 BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. 收起 | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...展开 BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...展开 BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM70 | Pioneer Chemicals Co., Ltd. | BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...展开 BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. 收起 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展开 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| MB-10 | Pioneer Chemicals Co., Ltd. | MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...展开 MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. 收起 | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...展开 MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. 收起 | |
| MB-311 | Pioneer Chemicals Co., Ltd. | MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...展开 MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. 收起 | |
| MB-6 | Pioneer Chemicals Co., Ltd. | MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic sol...展开 MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic solvents including chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it can solely be dissolved by high alcohols. With good solvent release ability, it also has excellent compatibility with other film forming resins, for instance chlorinated rubber, plasticizer, vinyl resins, and NC. MB-6 is broadly used in screen printing inks, container coatings, marine paints, masonry coatings, general purpose coatings, concrete coatings, external wall coatings, general purpose printing inks, concrete sealants, and road marker paints. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.23 to 0.30. 收起 | |
| MB-8 | Pioneer Chemicals Co., Ltd. | MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several org...展开 MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several organic solvents including ketones, aromatic hydrocarbons, esters, and has good compatibility with plasticizers, NC, CAB, and vinyl resin. MB-8 is broadly applied in leather treating agent, gilding material coatings, plastic coatings, printing inks, and PVC printing inks and coatings. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.37 to 0.43. 收起 | |
| MB-9 | Pioneer Chemicals Co., Ltd. | MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin ...展开 MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin with admirable durability, gloss, hardness, and heat resistance for use in adhesives, road marking, construction coatings, road coatings, miscellaneous ink, aerosol lacquers, plastic coating, ceramic coating, metal coatings, printing inks, and wood finishes. It has a molecular weight of 200,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.53 to 0.59. 收起 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展开 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展开 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展开 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展开 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| MPI Bright 100 | MPI Chemie B.V. | MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 200 | MPI Chemie B.V. | MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 300 | MPI Chemie B.V. | MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 420 | MPI Chemie B.V. | MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 450 | MPI Chemie B.V. | MPI Bright 450 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 450 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright CBS-X | MPI Chemie B.V. | MPI Bright CBS-X is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright CBS-X is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-1 | MPI Chemie B.V. | MPI Bright ER-1 is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-1 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-2 | MPI Chemie B.V. | MPI Bright ER-2 is an optical brightener in the form of a pale yellow powder. It is used as a whitening agent in paints and inks. MPI Bright ER-2 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-3 | MPI Chemie B.V. | MPI Bright ER-3 is an optical brightener in the form of a yellowish green crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-3 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright FP 127 | MPI Chemie B.V. | MPI Bright FP 127 is an optical brightener in the form of a light yellow powder. It is used as a whitening agent in paints and inks. MPI Bright FP 127 is designed to brighten colors and mask yellowing in desired applications. | |
| PChem® BM11 | Pioneer Chemicals Co., Ltd. | PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展开 PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, printing inks for soft PVC, and leather finishes. It has a molecular weight of 85,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.36. 收起 | |
| PChem® BM111 | Pioneer Chemicals Co., Ltd. | PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be di...展开 PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks, plastic coating, marine coating. PChem® BM111 has a molecular weight of 110,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.48. 收起 | |
| PChem® BM112A | Pioneer Chemicals Co., Ltd. | PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally ...展开 PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally used in applications of aluminum sealer, paper printing, and UV curing technology. PChem® BM112A has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® BM131 | Pioneer Chemicals Co., Ltd. | PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vin...展开 PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks. marine coating, plastic coating, gravure inks, and good for flexographic inks. It has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...展开 PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM17 | Pioneer Chemicals Co., Ltd. | PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展开 PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, and inks for smoking materials. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| Pchem® BM24G | Pioneer Chemicals Co., Ltd. | Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging varie...展开 Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose, vinyl, and chlorinated rubber. Pchem® BM24G is a binder for manufacturer of printing inks, primers, ceramic transfer lacquers, heat sealing lacquers for aluminum foils and adhesives, and ceramic and glass transfer printing lacquers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46. 收起 | |
| PChem® BM260 | Pioneer Chemicals Co., Ltd. | PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is so...展开 PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is soluble in chlorinated hydrocarbons, esters, glycol ether acetates, ketones, aromatic, glycol ethers, and is a binder for adhesion of polystyrene and aluminum, and that is good for applications of pigmented lacquer and compatible with alkyd resins. PChem® BM260 has a molecular weight of 24,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 7 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM270 | Pioneer Chemicals Co., Ltd. | PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications,...展开 PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications, and is generally used in applications of cover PVC substrates, pigment dispersion, hot process stamping, and more. PChem® BM270 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 124 mgKOH/g, and an inherent viscosity of 0.31. 收起 | |
| PChem® BM51 | Pioneer Chemicals Co., Ltd. | PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, a...展开 PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is compatible with a wide selection of other resins including polyesters, acrylics, vinyl, and is applicable in coatings and inks with alcohol resistance. PChem® BM51 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® BM60 | Pioneer Chemicals Co., Ltd. | PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展开 PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 10.0 mgKOH/g, and an inherent viscosity of 0.18. 收起 | |
| PChem® BM60E | Pioneer Chemicals Co., Ltd. | PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展开 PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 35,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 8.5 mgKOH/g, and an inherent viscosity of 0.17. 收起 | |
| PChem® BM66 | Pioneer Chemicals Co., Ltd. | PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展开 PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, concrete coatings, marine coating, plastic coating, gravure inks, silk screen printing inks. PChem® BM66 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® BM66D | Pioneer Chemicals Co., Ltd. | PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展开 PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of road marking, marine coating, plastic coating, PVC printing inks, gravure inks, paints for wall, and silk screen printing inks. PChem® BM66D has a molecular weight of 45,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.25. 收起 | |
| PChem® BM71 | Pioneer Chemicals Co., Ltd. | PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展开 PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC replacement in automotive plastisol, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM71 has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.54. 收起 | |
| PChem® BM72 | Pioneer Chemicals Co., Ltd. | PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展开 PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM72 has a molecular weight of 32,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.15. 收起 | |
| PChem® BM76 | Pioneer Chemicals Co., Ltd. | PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, P...展开 PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring, protective coatings, gravure inks, and silk screen printing inks. PChem® BM76 has a molecular weight of 105,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.37. 收起 | |
| PChem® BM81 | Pioneer Chemicals Co., Ltd. | PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and AB...展开 PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of silk screen printing inks, marine coating, inks, gravure inks, and plastic coating. PChem® BM81 has a molecular weight of 30,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.12. 收起 | |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a b...展开 PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. 收起 |
