1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300是一种气相二氧化硅,是ACEMATT® 消光剂产品家族的一种,具有很多激动人心的优点。ACEMATT® 3300也具有附加的优点,可为柔感涂料提供一种雅致的消光表面,可提升质感,也就是众所周知的柔软触感 | Request Sample |
ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...展开 ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. 收起 | Request Sample |
ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600是一种微颗粒状二氧化硅,作为特别有机聚合物使用,是专门为低光泽的辐射固化涂料而设计的。与传统的二氧化硅消光剂相比,ACEMATT® 3600对UV涂料的粘性影响较小。ACEMATT® 3600还具有高消光效率,在UV涂料系统中出色的透明度和易于加工等其他特点。 | Request Sample |
ACEMATT® 790 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. | Request Sample |
ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | 赢创的新型消光剂ACEMATT®810:在过去的两年内,由很多客户测试和验证过其高消光效率,ACEMATT®810是赢创消光剂组合中不可或缺的一部分。ACEMATT®810作为未经处理的粗粒沉淀二氧化硅,由于高光效率高而区别于其他产品,并特别适合用于色漆系统。 | Request Sample |
ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® HK 125是一种经济的未经处理的硅土,具有不同种类的粒径分布,适合一般用途 | Request Sample |
ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® HK 400是一种通用型未经处理的消光剂。它适合所有不需要有机表面处理的应用 | Request Sample |
ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440是一种非常高效的未经处理的消光(无光)助剂。ACEMATT® HK 440设计用于需要低光泽的涂料应用例如卷钢涂料、屋顶涂料、醇酸清漆 | Request Sample |
ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® OK 412是一种有机表面处理的易分散的消光剂,适合一般应用。该消光剂可获取异常杰出的表面特性,以及出色的滑爽效果,也适合有色涂料。由于它具有杰出的悬浮效果,它特别适合用于透明涂料 | Request Sample |
ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® OK 500是一种经有机表面处理的易分散的消光剂,适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果,也适合有色涂料。由于它具有杰出的悬浮特性,它尤其适合用于透明涂料 | Request Sample |
ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® OK 520是一种易分散、经有机表面处理的消光剂,适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果,也适合有色涂料。由于它具有杰出的悬浮特性,它尤其适合用于透明涂料 | Request Sample |
ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® OK 607是一种易分散、经有机表面处理的消光剂,具有非常低的平均粒径。该消光剂具有异常杰出的表面特性以及出色的滑爽效果,也适合有色涂料。由于它具有杰出的悬浮特性,它尤其适合用于透明涂料 | Request Sample |
ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅,适合各种油漆和涂料应用。ACEMATT® TS 100是一种热的未经处理的消光剂。ACEMATT® TS 100的特征是它的杰出的消光效率和透明度 | Request Sample |
ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | 二氨基官能三甲氧基硅烷增粘剂。 | Request Sample |
ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | 低粘度AEROSIL®气相二氧化硅水性乳液,具有轻微碱性pH值 | Request Sample |
AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N是一种AEROSIL®气相二氧化硅的低粘度水性乳液,具有轻微碱性的pH值 | Request Sample |
AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520是一种憎水型AEROSIL®的特殊的、纹理的、高填充的乳液。它可轻易有效地改善水性有色涂料和水性透明涂料的增稠和触变性、抗沉降性、颜料稳定效果以及机械性能 | Request Sample |
AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅,比表面积为200m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、食品和化妆品、电缆复合材料和凝胶、硅树脂橡胶,也用于工厂防护。 | Request Sample |
AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅,比表面积为300m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。 | Request Sample |
AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅,比表面积为380m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。 | Request Sample |
AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...展开 AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. 收起 | Request Sample |
AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
AEROSIL® E 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse. | Request Sample |
AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80是一种含二氧化硅和约1%氧化铝的混合氧化物,通过AEROSIL®工艺制备 | Request Sample |
AEROSIL® OX 50 | Evonik Operations GmbH, BL Coating Additives | 具有最小比表面积的颗粒热解法氧化物。高化学纯度、独特的低增稠性和聚集性为典型特征。被用于PET膜、牙复合物和制造超纯度的石英玻璃。 | Request Sample |
AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅,用聚甲基硅氧烷做后处理。 用于粘胶和密封剂、乙烯环氧树脂和电缆胶衣。 | Request Sample |
AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208是一种经聚二甲硅氧烷处理的气相二氧化硅。它显示了良好的增稠性和在复杂极性液体(如环氧基树脂,聚氨酯或乙烯基树脂等)中良好的触变性。它同时有良好的抗流挂性和出色的耐水性。 | Request Sample |
AEROSIL® R 7200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. | Request Sample |
AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅,在Aerosil® 200基础上用辛基硅烷做后处理。 用于油漆和涂料、粘胶和密封剂,以及环氧复合涂料体系。 | Request Sample |
AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅,在Aerosil® 300基础上用HMDS做后处理。 用于油漆和涂料、粘胶和密封剂,以及硅树脂橡胶。 | Request Sample |
AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅, 以Aerosil® 200为基础用十六烷基硅烷做后处理。 用于水性涂料。 | Request Sample |
AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅,基于比表面积为130 m2/g的亲水气相二氧化硅,用二甲基二氯硅烷后处理。 | Request Sample |
AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅,基于比表面积为200 m2/g的亲水气相二氧化硅,用二甲基二氯硅烷后处理。 | Request Sample |
AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...展开 AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. 收起 | Request Sample |
AEROXIDE® ALU 130 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings. | Request Sample |
AEROXIDE® ALU C | Evonik Operations GmbH, BL Coating Additives | 它是一种火法工艺制成的颗粒非常细的氧化金属,具有高比表面积。由于正电荷的特殊性能,产品具有多种用途。可用于PET-膜、荧光灯和灯泡、粉末涂料和高品质纸张喷墨涂料。 | Request Sample |
AEROXIDE® Alu C 805 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® Alu C 805是一种非常细粒径的热解氧化铝,经辛基硅烷处理。它可用于粉末涂料和调色剂中改善流动性,用于塑料粉末,如PVC中,阻止粘附和结块,保护粉末防止潮湿 | Request Sample |
AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...展开 Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. 收起 | Request Sample |
Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...展开 Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). 收起 | Request Sample |
ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223可提高基于SILIKOPON® EF和SILIKOFTAL® ED的防腐涂料的柔韧性,使配方性能更加完善。它不会迁移、不含有机溶剂且不受标签要求的限制。 | Request Sample |
ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIFLEX® 348是一种黄色不透明的液体,双酚A环氧硅嵌段共聚物。该活性树脂改性剂用于底漆/填料和面漆,用于溶剂型和无溶剂型双组分和热固化环氧树脂配方。该产品不会降低透明度,具有出色的柔韧性。它也增加了附着力和极好的耐水性。ALBIFLEX® 348良好的保存了网密度,不改变机械性能,对芳香族环氧树脂具有良好的相容性。 | Request Sample |
Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
Carbowet® 106 Surfactant | Evonik Operations GmbH, BL Coating Additives | 多官能团、低起泡、不含溶剂和烷基酚乙氧基化物的助剂,用于颜料和基材润湿 | Request Sample |
CARBOWET® 109 Surfactant | Evonik Operations GmbH, BL Coating Additives | 经济有效的表面活性剂,可提供快速的基材和颜料润湿,适合各种应用场合 | Request Sample |
Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Coating Additives | CARBOWET® 138表面活性剂是一种多功能添加剂,适用于颜料和基材润湿。这种非离子型表面活性剂通常是单独使用或与阴离子表面活性剂组合使用。该成本有效的表面活性剂可提供快速基材和颜料润湿性,并适合各种应用。 | Request Sample |
Carbowet® GA-100 Surfactant | Evonik Operations GmbH, BL Coating Additives | 该表面活性剂是非离子型表面活性剂的混合物,其特征为多功能、低起泡、无溶剂、无烷基酚乙氧基化物添加剂,用于颜料和基材润湿。该独特专利技术的混合物,可用于提供快速基材和颜料润湿,而且在建筑漆配方和水性颜料分散体中具有与共用增稠剂更佳的相容性 | Request Sample |
Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- co...展开 Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. 收起 | Request Sample |
Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | 作为一种基材润湿剂,Surfynol CT-211 可应用于水性涂料、油墨、胶粘剂和许多其它体系中。用量约为总配方量的0.1~3.0% | Request Sample |
Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Coating Additives | 在颜料碾磨应用中,Surfynol CT-221 可通过对颜料颗粒较好的润湿和碾磨气泡控制来增加展色性。它可在高颜料负载量下提供低粘度和出色的分散稳定性 | Request Sample |
COLOROL® F | Evonik Operations GmbH, BL Coating Additives | 用于溶剂型体系的润湿和分散添加剂。 | Request Sample |
Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...展开 Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. 收起 | |
Dicyclohexylamine | Henan Harvest Chem Co., LTD. | Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insectic...展开 Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts etc. 收起 | |
Dynol™ 360 Surfactant | Evonik Operations GmbH, BL Coating Additives | 表面活性剂,是一种低起泡超级润湿剂和成膜表面活性剂 | Request Sample |
Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | 低VOC、低起泡的非离子型润湿助剂,是高性能水性应用的理想选择。该润湿助剂可同时降低静态和动态表面张力至其它表面活性剂无法达到的程度。含100%活性物的液体 | Request Sample |
Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol 607表面活性剂,开发用于满足高性能而且经济有效的表面活性剂的增长需求。相比传统表面活性剂如氟表面活性剂和硅,它可为各种水性工业应用提供独特的性能平衡 | Request Sample |
Dynol™ 800 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wo...展开 Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 800 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 800 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. 收起 | Request Sample |
Dynol™ 810 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wo...展开 Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 810 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 810 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. 收起 | Request Sample |
Lipotin® A | Evonik Operations GmbH, BL Coating Additives | Lipotin® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization. | Request Sample |
Lipotin® DB | Evonik Operations GmbH, BL Coating Additives | 用于溶剂型体系的润湿和分散添加剂。 | Request Sample |
n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...展开 n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. 收起 | |
NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C130是一种透明至微黄色液体,50%重量比,于环三羟甲基丙烷缩甲醛丙烯酸酯中的二氧化硅纳米颗粒。它可用于溶剂型和非溶剂型辐射固化配方中。它具有良好的柔韧性,可用于套印清漆和塑料面漆。该产品可增强耐划伤和耐磨性,而不减少透明度。它具有对铝/玻璃极好的附着力,降低固化收缩率和阻隔作用。它也对塑料有附着力,对填充剂配方有抗沉降效果和改进的污垢脱落性能 | Request Sample |
NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C140是一种透明至微黄色液体,二氧化硅纳米颗粒50%重量比,混于己二醇二丙烯酸酯中。它具有良好的抗紫外线,高柔韧性,可用于溶剂型和无溶剂型辐射固化配方。它也适用于套印清漆和塑料面漆。本品具有增强的耐划伤和耐磨损性,不会降低透明度。它对铝/玻璃具有良好的附着力,可降低固化收缩率,以及具有阻隔效果。它还改善了污垢脱落性。 | Request Sample |
NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL®C 150是一种透明至微黄色液体,二氧化硅纳米颗粒50%重量比,混于三羟甲基丙烷(TMPTA)中。它可用于溶剂型和无溶剂型辐射固化配方。它具有高表面硬度和高交联密度,可用于套印清漆和塑料面漆。本品具有增强的耐划伤和耐磨损性,不会降低透明度。它对铝/玻璃具有良好的附着力,可降低固化收缩率,以及具有阻隔效果。它还改善了污垢脱落性和对塑料的附着力。 | Request Sample |
NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
N,N-dimethylformamide | Henan Harvest Chem Co., LTD. | N,N-dimethylformamide is a clear without suspension, inflammable liquid. This product is an organic solvent that is used in dye and paint applications. | |
REWOPAL® M 365 | Evonik Operations GmbH, BL Coating Additives | REWOPAL® M 365 is a non-ionic wetting and dispersing additive for waterborne formulations. Helps the wetting of organic pigment. Can be used as co-disprsant in base paints. | Request Sample |
Sec-butyl Acetate | Henan Harvest Chem Co., LTD. | Sec-butyl Acetate is a colorless, flammable liquid. This product has a molecular weight of 116.16 and has a density of 0.866-0.878 g/cm³. Sec-butyl Acetate is used as a solvent in coating and printing ink applications. | |
SILIKOFTAL® HTF MPA/MBA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin. It shows high flexibility and low thermoplasticity. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOFTAL® HTL | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL is a methoxy-functional silicone polyester resin. | Request Sample |
SILIKOFTAL® HTL 1 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOFTAL® HTL 3/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 3/MPA is a methoxy-functional silicone polyester resin. It shows an extraordinary yellowing resistance up to 250°C and a very good boiling water resistance. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | 用于生产耐热装饰涂料的溶剂型主体树脂。 | Request Sample |
SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOPHEN® AC 1000 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coati...展开 SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation. SILIKOPHEN® AC 1000 is recommended for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. 收起 | Request Sample |
SILIKOPHEN® AC 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the comp...展开 SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the completely cured coating at temperature load. This product is suitable for anti-corrosion coatings for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. 收起 | Request Sample |
SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | 用于耐热、抗腐蚀油漆的水性主体树脂。 | Request Sample |
SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | 用于耐热抗腐蚀油漆的溶剂型主体树脂。 | Request Sample |
SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | 用于耐热抗腐蚀油漆的溶剂型主体树脂。 | Request Sample |