| ADDAPT® Anticor™ A40 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...展开 ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...展开 ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...展开 ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. 收起 | |
| ADDAPT® Anticor™ L 4783 | ADDAPT Chemicals BV | ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...展开 ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. 收起 | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 200R | ADDAPT Chemicals BV | ADDAPT® BioWet™ 200R is a polyhydroxy amide in water. It is used as a compatibilizer and pigment dispersant in coatings and printing inks. This product is solvent-free, biodegradable, non-foaming, and improves pigment grinding. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...展开 ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...展开 ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...展开 ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 60G | ADDAPT Chemicals BV | ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G ...展开 ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G is non-foaming, biodegradable, and completely soluble in water. 收起 | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...展开 ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. 收起 | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...展开 ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. 收起 | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...展开 ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...展开 ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...展开 ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...展开 ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective ...展开 ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. 收起 | |
| ADDAPT® Foamstop™ 200N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegrada...展开 ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegradable. 收起 | |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展开 ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展开 ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...展开 ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective o...展开 ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. 收起 | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...展开 ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...展开 ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 33 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 33 is a proprietary blend of polyalkyleneglycols and siloxane based surface-active components. It is used as a foam control agent in paint, printing ink, PVC production, textiles, and lubricants. | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...展开 ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 55 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range an...展开 ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, textiles, and lubricants. 收起 | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...展开 ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 92 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effectiv...展开 ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, food processing, and lubricants. 收起 | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...展开 ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cuttin...展开 ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. 收起 | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...展开 ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...展开 ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...展开 ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. 收起 | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...展开 ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. 收起 | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...展开 ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...展开 ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. 收起 | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...展开 ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...展开 ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...展开 ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. 收起 | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...展开 ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. 收起 | |
| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...展开 ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. 收起 | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...展开 ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. 收起 | |
| Addaptol™ DB | ADDAPT Chemicals BV | Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanedi...展开 Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanediol mono-isobutyrate, Addaptol™ DB has less odor, improved wet scrub resistance, and improved leveling and pinhole resistance. 收起 | |
| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展开 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展开 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展开 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展开 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展开 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展开 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展开 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展开 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展开 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展开 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展开 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展开 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展开 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展开 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展开 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展开 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展开 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展开 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展开 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展开 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TPO | Eutec Chemical Co., Ltd. | Photocure TPO is a clear solution yellow crystalline powder of 2,4,6-trimethylbenzoyldiphenylphosphine oxide with a melting point between 87-93℃. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TPO-L | Eutec Chemical Co., Ltd. | Photocure TPO-L is a clear solution yellow liquid of Ethyl (2,4,6-trimethylbenzoyl)phenylphosphinate. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TZT | Eutec Chemical Co., Ltd. | Photocure TZT (2,4,6-Trimethylbenzophenone Methyl benzophenone Benzophenone) is a pale yellow odorless liquid. This product is used as a photoinitiator in UV-cured resins, inks and coatings. | |
| Speedcure 2-ITX | Lambson Group Ltd. | SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combi...展开 SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure 500 | Lambson Group Ltd. | SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and...展开 SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. 收起 | |
| Speedcure 5040 | Lambson Group Ltd. | Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展开 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起 | |
| Speedcure 5070 | Lambson Group Ltd. | Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展开 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起 | |
| Speedcure 7005 | Lambson Group Ltd. | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...展开 SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure 7010 | Lambson Group Ltd. | SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low mig...展开 SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure 7010-L | Lambson Group Ltd. | SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when use...展开 SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure 7040 | Lambson Group Ltd. | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...展开 SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. 收起 | |
| Speedcure 73 | Lambson Group Ltd. | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Lambson Group Ltd. | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. |
