| ADDAPT® Anticor™ A40 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...展开 ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...展开 ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. 收起 | |
| ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...展开 ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. 收起 | |
| ADDAPT® Anticor™ L 4783 | ADDAPT Chemicals BV | ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...展开 ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. 收起 | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 200R | ADDAPT Chemicals BV | ADDAPT® BioWet™ 200R is a polyhydroxy amide in water. It is used as a compatibilizer and pigment dispersant in coatings and printing inks. This product is solvent-free, biodegradable, non-foaming, and improves pigment grinding. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...展开 ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...展开 ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...展开 ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 60G | ADDAPT Chemicals BV | ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G ...展开 ADDAPT® BioWet™ 60G is a proprietary blend of polyalkylene glycols and polyhydroxy amide. It is used as a solvent-free glass adhesion promoter and glass corrosion inhibitor. This product is used in coatings, printing inks, and cleaning agents. BioWet 60G is non-foaming, biodegradable, and completely soluble in water. 收起 | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...展开 ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. 收起 | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...展开 ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. 收起 | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...展开 ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...展开 ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...展开 ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...展开 ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 150N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective ...展开 ADDAPT® Foamstop™ 150N is a proprietary blend of polyacrylates, PAGs, and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is biodegradable, completely soluble in water, and is effective over a wide pH range. 收起 | |
| ADDAPT® Foamstop™ 200N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegrada...展开 ADDAPT® Foamstop™ 200N is a proprietary blend of esters and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, effective over a wide pH range, and biodegradable. 收起 | |
| ADDAPT® Foamstop™ 400F | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展开 ADDAPT® Foamstop™ 400F is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 400N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over...展开 ADDAPT® Foamstop™ 400N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely water soluble, biodegradable, and is effective over a wide pH range, including formulations with extreme pH values (less than 3 or greater than 10). 收起 | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...展开 ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. 收起 | |
| ADDAPT® Foamstop™ 666K | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective o...展开 ADDAPT® Foamstop™ 666K is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, and is effective over a wide pH range and a high temperature range. 收起 | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...展开 ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...展开 ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 33 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 33 is a proprietary blend of polyalkyleneglycols and siloxane based surface-active components. It is used as a foam control agent in paint, printing ink, PVC production, textiles, and lubricants. | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...展开 ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 55 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range an...展开 ADDAPT® Foamstop™ MP 55 is a proprietary blend of siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, textiles, and lubricants. 收起 | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...展开 ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 92 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effectiv...展开 ADDAPT® Foamstop™ MP 92 is a proprietary blend of polyalkylene glycols and siloxane based surface-active components. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is effective over a wide pH range and is used in paint, printing ink, PVC production, food processing, and lubricants. 收起 | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...展开 ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cuttin...展开 ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. 收起 | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...展开 ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...展开 ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ WS 17 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint,...展开 ADDAPT® Foamstop™ WS 17 is a proprietary blend of polyalkylene glycols and surface-active components. It is a biodegradable foam control agent designed for formulations with extreme pH values. This product is completely water soluble and is used in paint, printing ink, floor polish, and other applications. 收起 | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...展开 ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. 收起 | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...展开 ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...展开 ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. 收起 | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...展开 ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...展开 ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® WaxMul™ C 125 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and pr...展开 ADDAPT® WaxMul™ C 125 is an emulsion based on T1-type carnauba wax in water. It is used to improve scratch resistance, repel water, and improve the release and anti-block properties. This product is used in paints, floor, car, and leather polishes, and printing inks. 收起 | |
| ADDAPT® WaxMul™ C 325 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and pri...展开 ADDAPT® WaxMul™ C 325 is an emulsion based on T3-type carnauba wax in water. It is used to improve scratch resistance, lubrication, as well as the release and anti-block properties. This product is used in floor, car, and leather polishes, paints, and printing inks. 收起 | |
| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...展开 ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. 收起 | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...展开 ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. 收起 | |
| Addaptol™ DB | ADDAPT Chemicals BV | Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanedi...展开 Addaptol™ DB is a proprietary mixture of branched esters of dibasic acids. It is a biodegradable, oxygenated solvent used in waterborne systems as a coalescing agent and in solvent borne systems as a tail solvent. When compared to 2,2,4-Trimethylpentanediol mono-isobutyrate, Addaptol™ DB has less odor, improved wet scrub resistance, and improved leveling and pinhole resistance. 收起 | |
| Speedcure 2-ITX | Lambson Group Ltd. | SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combi...展开 SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure 500 | Lambson Group Ltd. | SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and...展开 SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. 收起 | |
| Speedcure 5040 | Lambson Group Ltd. | Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展开 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起 | |
| Speedcure 5070 | Lambson Group Ltd. | Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展开 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起 | |
| Speedcure 7005 | Lambson Group Ltd. | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...展开 SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure 7010 | Lambson Group Ltd. | SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low mig...展开 SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure 7010-L | Lambson Group Ltd. | SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when use...展开 SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure 7040 | Lambson Group Ltd. | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...展开 SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. 收起 | |
| Speedcure 73 | Lambson Group Ltd. | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Lambson Group Ltd. | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 97 | Lambson Group Ltd. | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure 976 | Lambson Group Ltd. | SpeedCure 976 is a 50% active liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. | |
| Speedcure 976D | Lambson Group Ltd. | SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulat...展开 SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. 收起 | |
| Speedcure BDMB | Lambson Group Ltd. | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BEDB | Lambson Group Ltd. | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEM | Lambson Group Ltd. | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...展开 SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure BKL | Lambson Group Ltd. | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| Speedcure BMS | Lambson Group Ltd. | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV a...展开 SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure BP | Lambson Group Ltd. | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulati...展开 SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. 收起 | |
| Speedcure CPTX | Lambson Group Ltd. | SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DETX | Lambson Group Ltd. | SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DMB | Lambson Group Ltd. | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EAQ | Lambson Group Ltd. | Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow ...展开 Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow powder cures without an amine-type hydrogen donor and has its effectiveness raised by the presence of oxygen. It is used in curing resists and printing inks that are acid treated post-cure. 收起 | |
| Speedcure EDB | Lambson Group Ltd. | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EHA | Lambson Group Ltd. | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EMK | Lambson Group Ltd. | SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergis...展开 SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergist in highly pigmented UV and LED curable formulations. 收起 | |
| Speedcure EPD | Lambson Group Ltd. | Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起 | |
| Speedcure ITX | Lambson Group Ltd. | Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...展开 Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起 | |
| Speedcure MBB | Lambson Group Ltd. | SpeedCure MBB is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 246.nm. SpeedCure MBB provides surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. | |
| Speedcure MBF | Lambson Group Ltd. | SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244_nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure MBP | Lambson Group Ltd. | SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulatio...展开 SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure PBZ | Lambson Group Ltd. | SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and L...展开 SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure TPO | Lambson Group Ltd. | SpeedCure TPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 267, 298 and 380 nm. SpeedCure TPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure TPO-L | Lambson Group Ltd. | SpeedCure TPO-L is a liquid Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 274, 290 and 370 nm. SpeedCure TPO-L provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure XFe | Lambson Group Ltd. | Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odo...展开 Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odour and volatility while maintaining high cure speed. 收起 | |
| Speedcure XFs | Lambson Group Ltd. | SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at ...展开 SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations. 收起 | |
| Speedcure XFw | Lambson Group Ltd. | Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubil...展开 Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubility in many ink and resin systems. The product can be used for all UV flexo, screen and off-set inks; white pigmented UV lacquers and other white pigmented systems while exhibiting little odour and non-yellowing post curing. 收起 | |
| Speedcure XKm | Lambson Group Ltd. | SpeedCure XKm is a hybrid Norrish Type I / Norrish Type II photoinitiator from the phosphine oxide family, with absorption maxima at 247 and 364 nm. SpeedCure XKm provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined wi...展开 SpeedCure XKm is a hybrid Norrish Type I / Norrish Type II photoinitiator from the phosphine oxide family, with absorption maxima at 247 and 364 nm. SpeedCure XKm provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 |
