| BLUESIL RTV 3720 A | Elkem Silicones | BLUESIL RTV 3720 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means ...展开 BLUESIL RTV 3720 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means of casting or solventless spraying in both cases a silicone film is obtained. The product is available in two versions:RTV 3720 A&B: fast cure, for spray applicationRTV 3720 SC A&B: slow cure, for casting application 收起 | |
| BLUESIL RTV 3720 SC A | Elkem Silicones | BLUESIL RTV 3720 SC A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by mea...展开 BLUESIL RTV 3720 SC A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction (1:1 ratio). The material can be applied onto horizontal as well as vertical surfaces thanks to its slight thixotropic behaviour, by means of casting or solventless spraying in both cases a silicone film is obtained. The product is available in two versions:RTV 3720 A&B: fast cure, for spray applicationRTV 3720 SC A&B: slow cure, for casting application 收起 | |
| BLUESIL RTV 3825 | Elkem Silicones | BLUESIL RTV 3825 is a two component silicone elastomer, crosslinking at room temperature by reaction of polycondensation. It yields a soft flexible, elastic material presenting excellent tear resistance. | |
| BLUESIL SDS CAT CLEAR | Elkem Silicones | BLUESIL SDS CATA CLEAR is a thixotropic catalyst for condensation cure moldmaking products such as BLUESIL V 1065A and BLUESIL V 1067A. | |
| BLUESIL SDS CAT PURPLE | Elkem Silicones | BLUESIL SDS CATA PURPLE is a thixotropic catalyst for condensation cure moldmaking products such as BLUESIL V 1065A and BLUESIL V 1067A. | |
| BLUESIL SP 3304 | Elkem Silicones | BLUESIL SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane. | |
| BLUESIL SP 3304 | Elkem Silicones | BLUESIL SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane. | |
| BLUESIL TCS 7513 A | Elkem Silicones | BLUESIL TCS 7513 A is a two-component heat curing liquid silicone elastomer which cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7515 A | Elkem Silicones | BLUESIL TCS 7515 A is a two-component heat curing liquid silicone elastomer that cross-links by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7516 B | Elkem Silicones | BLUESIL TCS 7516 is a two-component heat curing liquid silicone elastomer, which cures by a polyaddition reaction.All Products from the Textile Coating System product line are specially engineered for coating applications. | |
| BLUESIL TCS 7517 A | Elkem Silicones | BLUESIL TCS 7517 A is crosslinking part of two-component heat curing liquid silicone elastomer, which cures by a polyaddition reaction. | |
| BLUESIL TCS 7521 A | Elkem Silicones | BLUESIL TCS 7521 A is a two-component polyaddition heat cured liquid silicone elastomer. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7534 A | Elkem Silicones | BLUESIL TCS 7534 A is a two-component heat curing liquid silicone elastomer which cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7534 B | Elkem Silicones | BLUESIL TCS 7534 B is a two-component heat curing liquid silicone elastomer which cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7534 B RED | Elkem Silicones | BLUESIL TCS 7534 B RED is a two-component heat curing liquid silicone elastomer which cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7537 A | Elkem Silicones | BLUESIL TCS 7537 A is a two-component heat curing liquid silicone elastomer which, after mixing with catalysts BLUESIL TCS 7537 B or catalyst BLUESIL TCS 7603 C, cures by a polyaddition reaction. All products from the Textile Coating System product line a...展开 BLUESIL TCS 7537 A is a two-component heat curing liquid silicone elastomer which, after mixing with catalysts BLUESIL TCS 7537 B or catalyst BLUESIL TCS 7603 C, cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. 收起 | |
| BLUESIL TCS 7537 A US | Elkem Silicones | BLUESIL TCS 7537 A US is a two-component heat curing liquid silicone elastomer which, after mixing with catalysts BLUESIL TCS 7537 B or catalyst BLUESIL TCS 7603 C, cures by a polyaddition reaction. All products from the Textile Coating System product lin...展开 BLUESIL TCS 7537 A US is a two-component heat curing liquid silicone elastomer which, after mixing with catalysts BLUESIL TCS 7537 B or catalyst BLUESIL TCS 7603 C, cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. 收起 | |
| BLUESIL TCS 7537 B RED | Elkem Silicones | BLUESIL TCS 7537 B RED is a two-component heat curing liquid silicone elastomer which, after mixing with catalysts BLUESIL TCS 7537 B or catalyst BLUESIL TCS 7603 C, cures by a polyaddition reaction.All products from the Textile Coating System product lin...展开 BLUESIL TCS 7537 B RED is a two-component heat curing liquid silicone elastomer which, after mixing with catalysts BLUESIL TCS 7537 B or catalyst BLUESIL TCS 7603 C, cures by a polyaddition reaction.All products from the Textile Coating System product line are specially engineered for textile coating applications. 收起 | |
| BLUESIL TCS 7552 A | Elkem Silicones | BLUESIL TCS 7552 A is a two-component heat curing liquid silicone elastomer which cures by a polyaddition reaction. All products from the Textile Coating System product line are specially engineered for textile coating applications. | |
| BLUESIL TCS 7600 CATA | Elkem Silicones | BLUESIL TCS 7600 CATA is a catalyst for BLUESIL TCS 7612 Base and TCS 7663 Base. | |
| BLUESIL TCS 7601 C BLU | Elkem Silicones | BLUESIL TCS 7601 C BLU is a catalyst for several BLUESIL TCS products. | |
| BLUESIL TCS 7603 C WHITE | Elkem Silicones | BLUESIL TCS 7603 C WHITE is a catalyst for BLUESIL TCS 7537 A | |
| BLUESIL THIXO ADD 22646 | Elkem Silicones | BLUESIL THIXO ADD 22646 is a unique liquid additive that can be used with some of the polyaddition and polycondensation cure moldmaking compounds. BLUESIL THIXO ADD 22646 is used to impart a non-flowing consistency allowing the compound to be brushed or t...展开 BLUESIL THIXO ADD 22646 is a unique liquid additive that can be used with some of the polyaddition and polycondensation cure moldmaking compounds. BLUESIL THIXO ADD 22646 is used to impart a non-flowing consistency allowing the compound to be brushed or troweled onto a model ~ changing the rheology from a flowable liquid to a non-slumping paste, while maintaining the excellent rubber properties of the base material. 收起 | |
| BLUESIL V-1062 A | Elkem Silicones | BLUESIL V-1062 A is a high strength, two-component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 14 Durometer (Shore A), very pourable rubber providing excellent physical properties, long library life, and excellent detail rep...展开 BLUESIL V-1062 A is a high strength, two-component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 14 Durometer (Shore A), very pourable rubber providing excellent physical properties, long library life, and excellent detail reproduction. BLUESIL V-1062 can also be used in vacuum demolding. 收起 | |
| BLUESIL V-1067 A | Elkem Silicones | BLUESIL V-1067 A is a high performance, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 40 Shore A, flowable rubber providing good physical properties, excellent dimensional stability and very low shrinkage. BLUESI...展开 BLUESIL V-1067 A is a high performance, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 40 Shore A, flowable rubber providing good physical properties, excellent dimensional stability and very low shrinkage. BLUESIL V-1067 is an excellent choice for prototype tooling applications. 收起 | |
| BLUESIL V-1069 | Elkem Silicones | BLUESIL V-1069 is a high strength, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 30 Shore A, thixotropic (non-sag) rubber providing excellent physical properties and long library life. Blending of BLUESIL V-1069 ...展开 BLUESIL V-1069 is a high strength, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 30 Shore A, thixotropic (non-sag) rubber providing excellent physical properties and long library life. Blending of BLUESIL V-1069 with BLUESIL V-1062 or BLUESIL V-1065 provides a unique variety of brush-on coating blends to suit the needs of many applications in the museum, architectural restoration field, theme park and the film industries. 收起 | |
| BLUESIL V-243 A | Elkem Silicones | Bluesil V-243 A is a two component, high strength, addition cure, silicone requiring a heat cure to obtain optimum properties. The long work life, high strength properties, and its ability to accept high levels of silicone diluent fluid, make it an excell...展开 Bluesil V-243 A is a two component, high strength, addition cure, silicone requiring a heat cure to obtain optimum properties. The long work life, high strength properties, and its ability to accept high levels of silicone diluent fluid, make it an excellent choice for transfer print pad applications. Bluesil V-243 is also an excellent product for roll applications. 收起 | |
| BLUESIL V-249 A | Elkem Silicones | Bluesil V-249 A is a two component, addition cure, heat curing silicone rubber compound. It is designed specifically for use as converter and embossing rolls. The long work life, high Shore A (67) hardness, and high strength properties make it an excellen...展开 Bluesil V-249 A is a two component, addition cure, heat curing silicone rubber compound. It is designed specifically for use as converter and embossing rolls. The long work life, high Shore A (67) hardness, and high strength properties make it an excellent choice for many types of roll applications. Additives such as silicone diluent and color pigments may be added to obtain special features for specific applications. Bluesil V-249 may be meter mixed and dispensed, or hand poured 收起 | |
| BLUESIL V-330 | Elkem Silicones | Bluesil V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent re...展开 Bluesil V-330 is a two component, addition cure, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. Bluesil V-330 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL V-340 | Elkem Silicones | Bluesil V-340 is a two component, addition reaction, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellen...展开 Bluesil V-340 is a two component, addition reaction, room temperature or heat accelerated cure silicone rubber compound. It is designed as a variable hardness rubber with high strength properties, long library life, excellent detail reproduction, excellent release characteristics, and improved resistance to inhibition. The specific hardness is dependent on which curing agent is used. Bluesil V-340 is an excellent choice for pattern shop, model shop, and Stereolithography service bureau mold making and tooling applications. 收起 | |
| BLUESIL VICURE 2 | Elkem Silicones | BLUESIL VICURE 2 is a Stannous Octoate tin complex. It is a cure accelerator when used in conjunction with a Condensation base and Catalyst combination. | |
| BLUESIL VRM-65 A | Elkem Silicones | BLUESIL VRM-65 is a sprayable or brushable thixotropic moldmaking silicone RTV designed as a 10:1 cure system with high strength rubber properties. | |
| Epoxy Acrylate SE 120 | Soltech Ltd | Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展开 Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, lithographic inks, and fast cure coatings. Epoxy Acrylate SE 120 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 60℃. 收起 | |
| Epoxy Acrylate SE 140 | Soltech Ltd | Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展开 Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, and low odor coatings. Epoxy Acrylate SE 140 is 70% polymer solid by weight with a viscosity of 20,000-30,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 146 | Soltech Ltd | Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applicat...展开 Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 146 is 75% polymer solid by weight with a viscosity of 8,000-14,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...展开 Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 148 | Soltech Ltd | Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings...展开 Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 148 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 1500 | Soltech Ltd | Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic i...展开 Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic inks, screen inks, clear coatings for paper, top coats for wood, and overprint finishes. Epoxy Acrylate SE 1500 is 100% polymer solid by weight with a viscosity of 900-1,500 at 60℃. 收起 | |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...展开 Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. 收起 | |
| Epoxy Acrylate SE 1636 | Soltech Ltd | Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate...展开 Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate SE 1636 is 50% polymer solid by weight with a viscosity of 35,000-55,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 1700 | Soltech Ltd | Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as...展开 Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as wood sealers, overprint varnishes, laminating adhesives, screen inks, and lithographic inks. Epoxy Acrylate SE 1700 is 100% polymer solid by weight with a viscosity of 2,000-5,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 1701 | Soltech Ltd | Epoxy Acrylate SE 1701 is a modified bisphenol A epoxy acrylate oligomer designed to provide abrasion resistance, solvent resistance, flexibility, high gloss, and a fast curing response. This product is commonly used in applications such as paper coatings...展开 Epoxy Acrylate SE 1701 is a modified bisphenol A epoxy acrylate oligomer designed to provide abrasion resistance, solvent resistance, flexibility, high gloss, and a fast curing response. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1701 is 100% polymer solid by weight with a viscosity of 6,000-9,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 1702 | Soltech Ltd | Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in app...展开 Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1702 is 100% polymer solid by weight with a viscosity of 4,000-6,000 at 60℃. 收起 | |
| Epoxy Acrylate SE 1703 | Soltech Ltd | Epoxy Acrylate SE 1703 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide solvent resistance, abrasion resistance, high gloss, and a fast curing response. This product is commonly used in applicati...展开 Epoxy Acrylate SE 1703 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide solvent resistance, abrasion resistance, high gloss, and a fast curing response. This product is commonly used in applications such as clear paper coatings, clear wood coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1703 is 100% polymer solid by weight with a viscosity of 2,500-4,000 at 60℃. 收起 | |
| Full Acrylate SA 345 | Soltech Ltd | Full Acrylate SA 345 is an acrylic oligomer diluted with 1,6 hexanediol diacrylate and tripropyleneglycol diacrylate monomers that is designed to provide flexibility, intercoat adhesion, and adhesion to substrates. Common applications of this product incl...展开 Full Acrylate SA 345 is an acrylic oligomer diluted with 1,6 hexanediol diacrylate and tripropyleneglycol diacrylate monomers that is designed to provide flexibility, intercoat adhesion, and adhesion to substrates. Common applications of this product include plastic coatings and plastic screen inks. Full Acrylate SA 345 is 54% polymer solid by weight with a viscosity of 18,000-28,000 at 25℃. 收起 | |
| Polyester Actylate SP 220 | Soltech Ltd | Polyester Actylate SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate that is designed to provide adhesion on glass and plastics, light color, and adhesion between substrates. Common applications of this product include...展开 Polyester Actylate SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate that is designed to provide adhesion on glass and plastics, light color, and adhesion between substrates. Common applications of this product include overprint varnish, post formable inks, wet litho inks, and primer coatings for metal. Polyester Actylate SP 220 is 60% polymer solid by weight with a viscosity of 30,000-50,000 at 25℃. 收起 | |
| Polyester Actylate SP 224 | Soltech Ltd | Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives...展开 Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives, and screen inks. Polyester Actylate SP 224 is 70% polymer solid by weight with a viscosity of 50,000-100,000 at 25℃. 收起 | |
| Polyester Actylate SP 236 | Soltech Ltd | Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...展开 Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. 收起 | |
| Polyester Actylate SP 236L | Soltech Ltd | Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...展开 Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. 收起 | |
| Polyester Actylate SP 238 | Soltech Ltd | Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...展开 Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. 收起 | |
| Polyester Actylate SP 260 | Soltech Ltd | Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top c...展开 Polyester Actylate SP 260 is a multifunctional polyester acrylate oligomer with 5% TMPTA that is designed to provide compatibility and heat resistance. Common applications of this product include wet lithographic inks, wet lithographic coatings, and top coatings for vacuum metalizing. Polyester Actylate SP 260 is 95% polymer solid by weight with a viscosity of 6,000-14,000 at 25℃. 收起 | |
| Polyester Actylate SP 280 | Soltech Ltd | Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester A...展开 Polyester Actylate SP 280 is a low viscosity multi-functional polyester acrylate oligomer designed to provide light color, high gloss, fast curing, pigment wetting, and low odor. Common applications of this product include high gloss coatings, Polyester Actylate SP 280 is 100% polymer solid by weight with a viscosity of 2,500-3,500 at 25℃. 收起 | |
| Polyester Actylate SP 281 | Soltech Ltd | Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss co...展开 Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 281 is 100% polymer solid by weight with a viscosity of 80-120 at 25℃. 收起 | |
| Polyester Actylate SP 283 | Soltech Ltd | Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, hig...展开 Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 283 is 100% polymer solid by weight with a viscosity of 1,000-2,000 at 25℃. 收起 | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展开 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE® 430 | Elkem Silicones | SILCOLAPSE® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many application...展开 SILCOLAPSE® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many applications in industry and food. 收起 | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展开 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展开 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展开 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mec...展开 SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. 收起 |
