| Adherant ADK | Elementis 海名斯特殊化学 | Adherant ADK 为增进复合油墨对 PET 材质附着性，以及溶剂型涂料对层间密着和各种塑料、金属底材的密着性的添加剂。 | |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® 流变助剂为一种极其有效的有机改性蒙脱土，提供在不饱和聚酯层合树脂及凝胶涂料应用中的流变及流动性控制。与传统的有机澎润土或气相二氧化硅不同的是 BENATHIX® 流变助剂无需使用高剪切混合设备，且使用时可在加入聚酯树脂及其它组成前，先与苯乙烯预混合，可获得最佳性能。 | |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 流变助剂为一种通用型有机膨润土，适用于低至中极性脂肪烃及芳香烃涂料体系中。 | |
| BENGEL® 818 | Elementis 海名斯特殊化学 | BENGEL® 818 具有极佳的分散性、良好的触变性、抗流挂性及防沉降性。BENGEL® 818 易分散型有机膨润土，在生产过程中具有很大的灵活性。推荐用于气干型长油醇酸瓷漆、聚氨酯打磨型封闭底漆、普通的工业维护体系和脂肪族体系中。 | |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 易分散型有机膨润土可简化油漆体系的配制及制造。适用于中至高极性涂料体系，如酮类、酯类、醇酯类、醚酯类、醇类。使用 BENGEL® 828 可有效提高生产效率。 | |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958 流变助剂是一种易分散型有机膨润土，适用于低到中极性有机溶剂体系。提供良好的抗流挂性和防沉性能。容易分散，在生产过程中可灵活操作。推荐使用在气干型长油醇酸瓷漆、聚氨酯体系、打印油墨、密封胶和脂肪族体系中。 | |
| BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 为超分散型有机膨润土流变助剂，可简化油漆体系的配制及制造。本产品具有广泛的应用，可用于中／低至高极性溶剂涂料与油墨体系。 | |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 为一适用于中至高极性有机溶剂涂料体系与合成粘结剂体系的有机膨润土添加剂。 | |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 为一适用于低至中极性有机溶剂涂料体系的有机膨润土添加剂。 | |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD®-1 为一适用于脂肪族及非极性到中极性有机溶剂涂料体系的有机膨润土添加剂。 | |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD®-2 为一适用于中至高极性有机溶剂涂料体系的有机膨润土添加剂。 | |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展开 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Copper Chromite Black P2028 | Dongguan Hailerui Chemical Co., Ltd. | Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints. | |
| DAPRO® ACP-16W | Elementis 海名斯特殊化学 | DAPRO® ACP-16W 为水性附着增进剂，设计用于用增进水性涂料与油墨在聚丙烯（PP）材质上的附着效果。 | |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622是一种有机硅改性的液体消泡剂，适合溶剂型体系 | |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 为一具有良好乳化性能的水性消泡剂，具有优异的消泡、抑泡效果。 | |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 高效适合用于高质量橡胶应用，且提供极佳的泡沫抑制和消泡性能。在水中极易分散，适用于建筑涂料、粘合剂、乳液制备和水墨等水性体系。 | |
| DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 是用于溶剂型涂料的高效能添加剂，具有极佳抗沉降与抗流挂效能，特别适用于不含芳香族的涂料配方。 | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 是一高效能且不含有机硅长效型消泡剂。即使涂料长期存放后使用，仍可维持其有效的消泡性能。DAPRO® DF 1760 所含的所有非挥发性成分皆符合美国联邦法规的药物暨食品管理（FDA）CFR 21 175.105；175.300；176.170 与 176.180 条款的规定。 | |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 为一高性能消泡剂，适用于水性油墨。 | |
| DAPRO® DF 690 | Elementis 海名斯特殊化学 | DAPRO® DF 690 为一研磨阶段或高剪切阶段用消泡剂，对大泡与微泡有极佳的去稳定效果，并展现极佳的持久性，且不会影响体系光泽及展色性。 | |
| DAPRO® DF 7015 | Elementis 海名斯特殊化学 | DAPRO® DF 7015 是一具有良好乳化性能的水性消泡剂。特别推荐用于研磨浆料、乳胶漆和油墨 | |
| DAPRO® UW 461 | Elementis 海名斯特殊化学 | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| DAPRO® W-77 | Elementis 海名斯特殊化学 | DAPRO® W-77 表面张力调整剂可作为高表面张力与低表面张力接口间的缓冲介质，无论是用于涂层与涂层之间或是涂层与基材之间。其可有效消除或减少涂膜缺陷如：表面涂布不均、鱼眼、缩孔等。DAPRO® W-77 亦可促进涂料在难以润湿或受污染的基材表面上的均匀涂布，并提供极佳的重涂性。DAPRO® W-77 不含烷基酚乙氧基化合物与有机硅，其非挥发性成分符合美国联邦法规之药物暨食品管理（FDA）之 CFR 21 175.300 条款的规定。 | |
| Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F 为不含芳香族的溶剂型消泡剂，符合环保规定，广泛用于溶剂型涂料体系。 | |
| Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 为适用于高固体份、高膜厚环氧地坪涂料及丝网油墨抑泡、消泡剂。 | |
| Defom W-0506 | Elementis 海名斯特殊化学 | Defom W-0506 为一以乳化聚硅氧烷为主要成份的消泡剂产品。广泛用于水性体系的抑泡、消泡。 | |
| Defom W-082 | Elementis 海名斯特殊化学 | Defom W-082 为含疏水性粒子的矿物油系消泡剂。可提供优异的抑泡、消泡效果。 | |
| Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 为含疏水性粒子的矿物油系消泡剂。可提供优异的抑泡、消泡效果。 | |
| DeuAdd MA-95 | Elementis 海名斯特殊化学 | DeuAdd MA-95 为低气味多功能胺中和剂，兼具酸碱值调节和稳定﹑促进漆膜光泽展现﹑提高罐内防腐蚀性能等。 | |
| DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 为一分散的聚乙烯蜡防沉剂，取用方便且易于分散的防沈剂。 | |
| DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P 为一分散的聚乙烯蜡浆，添加时取用方便且易于分散的防沉剂。 | |
| DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 为一预先分散在溶剂中的聚 胺蜡，能够提供颜填料在涂料体系中的防沉性，以及防流挂效果。 | |
| DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 为一缔合型聚氨酯增稠剂，提供水性体系增稠触变等效能。 | |
| DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A 为缔合型聚氨酯增稠剂，提供水性体系增稠、流动等效能。 | |
| DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108F 为非离子缔合型增稠剂(NiSAT)适用于水性体系的应用，可提供中剪切粘度并兼顾流动性，本产品设计不含锡、APEO 与有机溶剂。 | |
| DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F 为非离子缔合型增稠剂(NiSAT)适用于水性体系的应用，可提供中剪切粘度并兼顾流动性，本产品设计不含锡、APEO与有机溶剂。 | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| Disponer 904S | Elementis 海名斯特殊化学 | Disponer 904S 为特殊酸与硅酮混合的润湿、分散剂，对防止钛白粉和其他颜料配用所产生的浮色、发花特具效果；并可避免产生沉积硬结。 | |
| Disponer 912 | Elementis 海名斯特殊化学 | Disponer 912 具有优异的颜料润湿分散性，可适用于溶剂型涂料及油墨中无机颜料及膨润土的润湿、分散，特别推荐使用于木器底漆中，以增进对木材导管的润湿性。 | |
| Disponer 929 | Elementis 海名斯特殊化学 | Disponer 929 是针对碳黑而发展出来的分散、展色剂，可添加在涂料内研磨；或作为研磨展色剂，单独与碳黑混合研磨分散，作成调色或着色用黑色浆。 | |
| Disponer 983 | Elementis 海名斯特殊化学 | Disponer 983 为高分子型分散剂，适用于溶剂型中、高极性树脂体系中高级碳黑及有机颜料的分散。 | |
| Disponer W-920 | Elementis 海名斯特殊化学 | Disponer W-920是一种独特的分散助剂，可用于有机颜料、铁氧化物颜料在水性体系中的分散 | |
| DMAE | Elementis 海名斯特殊化学 | DMAE 为一高效的胺中和剂。可作为 pH 值调整、稳定及辅助溶剂等效能。 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展开 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Greesol™ A04 A | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Ethylhexanol solvent based product. 收起 | |
| Greesol™ A04 BC | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Butoxylethanol solvent based product. 收起 | |
| Greesol™ A04 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Dipropandiol monomethanol ether solvent based product. 收起 | |
| Greesol™ A04 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Ethandiol solvent based product. 收起 | |
| Greesol™ A04 NP | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propanol solvent based product. 收起 | |
| Greesol™ A04 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Isopropanol solvent based product. 收起 | |
| Greesol™ A04 PG | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propandiol solvent based product. 收起 | |
| Greesol™ A04 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive and paint and dye manufacturing. It is a solvent based product according to user needs. 收起 | |
| Greesol™ A06 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, an...展开 Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, a...展开 Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. The dipropylene glycol monomethyl ether percentage can be customized per request. 收起 | |
| Greesol™ ASE | Chem Additive (YueYang) Co.,Ltd. | Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic c...展开 Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV and laminating adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展开 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展开 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| Greesol™ E20 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This p...展开 Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E40 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well su...展开 Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E65 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. T...展开 Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can also be use as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ E85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a elect...展开 Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ F06 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, a...展开 Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ F07 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterb...展开 Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ FS85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suit...展开 Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suitable for use in commercial printing presses, and been shown to be effective in clear edge of printing dots and does not cause excessive ink emulsion in ink jet inks. 收起 | |
| Greesol™ LE5 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, w...展开 Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...展开 Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE8 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The con...展开 Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. |
