| RESYDROL® SF 8010w/50WA | Allnex | RESYDROL® SF 8010W/50WA is an aqueous oil-modified multi-domain dispersion, especially suitable as a sole binder for timber/deck stain applications, wooden fences and sidings with outstanding outdoor durability, at various climates. Due to its enhanced fl...展开 RESYDROL® SF 8010W/50WA is an aqueous oil-modified multi-domain dispersion, especially suitable as a sole binder for timber/deck stain applications, wooden fences and sidings with outstanding outdoor durability, at various climates. Due to its enhanced flexibility combined with a well-balanced overall performance, the binder brings improved "controlled erosion" wear off, when used on timber decking. 收起 | Request Sample |
| RESYDROL® SF 8011w/50WA | Allnex | RESYDROL® SF 8011W/50WA is an aqueous oil-modified multi-domain dispersion especially suitable as a sole binder for timber/ decking applications, wooden fences and sidings with excellent outdoor durability, in warm climate regions. (Temperatures cycles > ...展开 RESYDROL® SF 8011W/50WA is an aqueous oil-modified multi-domain dispersion especially suitable as a sole binder for timber/ decking applications, wooden fences and sidings with excellent outdoor durability, in warm climate regions. (Temperatures cycles > 0 °C) Due to the harder backbone compared to Resydrol SF 8010W, it is recommended to blend Resydrol SF 8011W/50WA with a flexible, non-modified WB alkyd or oil components, to ensure sufficient flexibility at lower (< 0 °C) temperatures. 收起 | Request Sample |
| RESYDROL® VAF 5540w/70MP | Allnex | Resydrol® VAF 5540W/70MP is a non-drying alkyd resin, after neutralization with amines water-thin-able. It is an additional resin for waterdilutable primer surfacers to improve levelling. | Request Sample |
| RESYDROL® VAF 6111w/60WA | Allnex | 氧化干燥的醇酸树脂，作为水性乳胶，不含胺和氨水 | Request Sample |
| RESYDROL® VAL 5547w | Allnex | Resydrol® VAL 5547W is an oxidatively drying, without prior neutralization water dilutable, modified linseed oil. It can be used in wood impregnations. | Request Sample |
| RESYDROL® VAX 5538w/50WA | Allnex | Resydrol® VAX 5538W/50WA is recommended as a modifier resin for waterborne primer-surfacers to improve adhesion (e.g. to PVC) and corrosion resistance. | Request Sample |
| RESYDROL® VAY 6096w/39WA | Allnex | 短油度，氧化干燥的丙烯酸改性醇酸树脂，作为水性乳液。它是用于配制极快速干燥工业涂料体系的单一基料 | Request Sample |
| RESYDROL® VAY 6278w/45WA | Allnex | 氧化干燥的，可用氨水中和的丙烯酸醇酸树脂混合物，以水性乳胶形式存在 | Request Sample |
| ROSKYDAL® 500 A | Allnex | ROSKYDAL® 500 A is a wax-free unsaturated polyester resin which cures to yield hard, scratch-resistant films for brilliant high-gloss or matt finishes with good chemical resistance. Coatings formulated with ROSKYDAL® 500A have very good flow properties. T...展开 ROSKYDAL® 500 A is a wax-free unsaturated polyester resin which cures to yield hard, scratch-resistant films for brilliant high-gloss or matt finishes with good chemical resistance. Coatings formulated with ROSKYDAL® 500A have very good flow properties. The addition of up to 30% ROSKYDAL®E 70 improves the flexibility and polishability of the films without reducing the scratch resistance. 收起 | Request Sample |
| ROSKYDAL® 502 BA | Allnex | ROSKYDAL® 502 BA is a highly-reactive, styrene-free, wax-free unsaturated polyester resin which cures to yield hard films. The coatings can be conventional- or UV radiation- cured and have good resistance to scratching, solvents, other chemicals, and yell...展开 ROSKYDAL® 502 BA is a highly-reactive, styrene-free, wax-free unsaturated polyester resin which cures to yield hard films. The coatings can be conventional- or UV radiation- cured and have good resistance to scratching, solvents, other chemicals, and yellowing in both light and dark conditions. The application rate should not exceed 100 g/m2. 收起 | Request Sample |
| ROSKYDAL® K 14 M | Allnex | ROSKYDAL® K 14 M can be used as a binder for highly filled knifing fillers, putties for marble and stone and adhesives. | Request Sample |
| ROSKYDAL® K 36 | Allnex | ROSKYDAL® K 36 is an amine-accelerated, unsaturated polyester resin of high reactivity and low viscosity which is cold curing, even around 0°C, and forms polymers of medium flexibility. | Request Sample |
| ROSKYDAL® K 65 | Allnex | ROSKYDAL® K 65 can be used as a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. | Request Sample |
| ROSKYDAL® K 68 | Allnex | ROSKYDAL® K 68 can be used as a binder for highly filled knifing fillers, especially for use with stoving coating systems. | Request Sample |
| SETA H 2959 | Allnex | SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room...展开 SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room temperature to form homogeneous and blister-free films, even in high thicknesses. 收起 | Request Sample |
| SETAL® 01-311/63 | Allnex | SETAL® 01-311/63 is a long oil alkyd resin based on soya-bean oil, which exhibits excellent gloss and gloss retention, high durability, adhesion and non-yellowing properties, fast sag-resistant application, and ease of brushing with excellent leveling. | Request Sample |
| SETAL® 014/100 | Allnex | SETAL® 014/100 is a long oil isophthalic alkyd resin based on linseed oil, exhibiting excellent pigment wetting characteristics, good colour development, improvement in bronzing and resistance to emulsification from offset fount solutions. | Request Sample |
| SETAL® 0405 | Allnex | SETAL® 0405 is a long oil linseed fatty acid based epoxy ester targeting Deco DTM applications in blends with LOAs and Urethane alkyds | Request Sample |
| SETAL® 0440/60X | Allnex | SETAL 0440-60X is a dehydrogenated castor oil based epoxy ester with excellent adhesion and resistance to a wide range of solvents. | Request Sample |
| SETAL® 1337/70 | Allnex | SETAL® 1337/70 is a chain-stopped soybean oil alkyd resin for use in the manufacture of general industrial air dry or force dry enamels. It is a quick- curing resin and has a high tolerance for aliphatic solvents. | Request Sample |
| SETAL® 1338/55 | Allnex | SETAL® 1338/55 is a fast drying chain stopped alkyd resin based on soya bean oil. It exhibits good pigment compatibility, good initial colour and colour retention. | Request Sample |
| SETAL® 142 XX-60 | Allnex | SETAL® 142 XX-60 is an air drying short oil alkyd resin based on soya bean oil fatty acids. | Request Sample |
| SETAL® 1603 BA-78 | Allnex | SETAL® 1603 BA-78 is a polyester polyol resin with 5.4% OH (calculated on non-volatiles). | Request Sample |
| SETAL® 168 SS-80 | Allnex | SETAL® 168 SS-80 is a slightly branched polyester polyol with 4.3 % OH (calculated on non-volatiles) High flexibility, even at low temperatures. Good outdoor durability. | Request Sample |
| SETAL® 1715 VX-74 | Allnex | SETAL® 1715 VX-74 is a saturated polyester resin with 4.4 % OH (calculated on non-volatiles). | Request Sample |
| SETAL® 173 VS-60 | Allnex | SETAL® 173 VS-60 is a saturated polyester resin with high hardness, very good adhesion, Good compatibility with CAB. | Request Sample |
| SETAL® 1742/60 | Allnex | SETAL® 1742/60 is a fast dry short oil rosin & phenolic modified linseed alkyd for shop primers and implement coatings. | Request Sample |
| SETAL® 189 XX-65 | Allnex | SETAL® 189 XX-65 is a saturated polyester resin. | Request Sample |
| SETAL® 202 WS-65 | Allnex | SETAL® 202 WS-65 is a pure long oil alkyd resin based on soya-bean oil, which exhibits excellent durability, gloss and gloss retention, and through dry. | Request Sample |
| SETAL® 212 | Allnex | SETAL 212 exhibits outstanding flexibility, excellent alkali- and abrasion resistance, and produces tough, non-yellowing, chemical-resistant coatings. | Request Sample |
| SETAL® 229 XX-60 | Allnex | SETAL® 229 XX-60 is a short-oil alkyd resin based on tall oil fatty acids with good adhesion, fast curing and good pigment wetting properties. | Request Sample |
| SETAL® 26-1617 | Allnex | SETAL® 26-1617 is a polyester resin for use in high solids flexible coatings for exterior exposure. When crosslinked with aliphatic polyisocyanate cross-linker and properly cured, this resin provides films that are very flexible and very durable. SETAL® 2...展开 SETAL® 26-1617 is a polyester resin for use in high solids flexible coatings for exterior exposure. When crosslinked with aliphatic polyisocyanate cross-linker and properly cured, this resin provides films that are very flexible and very durable. SETAL® 26-1617 may also be utilized as a cross-linkable plasticizing modifier.\r\n 收起 | Request Sample |
| SETAL® 26-3705 | Allnex | SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-iso...展开 SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-isocyanates, polyamines, poly-ketimines and unsaturated polyesters or acrylics. SETAL® 26-3705 was developed for the next generation of non-isocyanate two component primer systems. When reacted with SETAL® 26-3701 and SETAL®UX 10-1440, this system provides much faster dry versus a standard two-component isocyanateprimer system without the negative health and safety issues associated with isocyanates. 收起 | Request Sample |
| SETAL® 270 SM-70 | Allnex | SETAL® 270 SM-70 is an air-drying long oil alkyd resin based on soya bean oil. | Request Sample |
| SETAL® 282 | Allnex | SETAL® 282 is an aliphatic urethane modified long oil alkyd with high durability and low yellowing used for marine varnish applications. | Request Sample |
| SETAL® 286 EHV WS-70 (P) | Allnex | SETAL® 286 EHV WS-70 (P) is an air-drying long oil alkyd resin based on soya bean oil with fast drying, good colour fastness, brushability and durability. Good body and flow. | Request Sample |
| SETAL® 293 | Allnex | SETAL® 293 is a high solids air-drying long oil alkyd based on unsaturated fatty acid with very good brushability, levelling, filling, high gloss, low yellowing tendency and good through hardening. | Request Sample |
| SETAL® 3265 | Allnex | SETAL® 3265 is a fast dry urethane oil with high aliphatic solvent tolerance for clear wood varnishes and pigmented coatings including paving paints. | Request Sample |
| SETAL® 3275 | Allnex | SETAL® 3275 is a high solids fast dry urethane oil with excellent balance of hardness for decorative and industrial applications. | Request Sample |
| SETAL® 3931 | Allnex | SETAL® 3931 is based on a maleinised mixed drying oils supplied in water for use in semi-transparent wood stains, both interior and exterior, deco and industrial wood finishes. | Request Sample |
| SETAL® 404/50 | Allnex | SETAL® 404/50 is an unmodified medium oil length alkyd resin based on mixed oils. It is a versatile resin which produces enamels with good air-dry, durability, flexibility and gloss retention. | Request Sample |
| SETAL® 50-009/59 | Allnex | SETAL 50-009/59 is a pure long oil alkyd resin based on soya- bean oil, which exhibits excellent gloss and gloss retention, combined with good dry and durability. | Request Sample |
| SETAL® 50-040/65 | Allnex | SETAL® 50-040/65 is a high viscosity, long oil pentaeythritol-modified alkyd resin based on soya bean oil. | Request Sample |
| SETAL® 50-055/50 | Allnex | SETAL® 50-055/50 is a long oil alkyd resin based on dehydrated castor oil with the following benefits fast drying,brush or spray application , good recoat properties and excellent adhesion to galvanised iron and other metals. | Request Sample |
| SETAL® 50-204/50 | Allnex | SETAL® 50-204/50 is a rosin phenolic modified medium oil length alkyd based on mixed oils. | Request Sample |
| SETAL® 50-402/50 | Allnex | SETAL® 50-402/50 is a Linseed oil based medium oil length alkyd for brush or roller applied primers and topcoats targeting applications to metal and timber within Industrial and Deco segments. | Request Sample |
| SETAL® 50-609/50 | Allnex | SETAL® 50-609/50 is a premium phenolic rosin modified short oil alkyd based on mixed drying oils with rapid dry and high gloss. Is recommended for anti-corrosive primers, primer surfacers and fast dry highly durable gloss topcoats. Primers can be overcoat...展开 SETAL® 50-609/50 is a premium phenolic rosin modified short oil alkyd based on mixed drying oils with rapid dry and high gloss. Is recommended for anti-corrosive primers, primer surfacers and fast dry highly durable gloss topcoats. Primers can be overcoated with 2k Iso based topcoats. 收起 | Request Sample |
| SETAL® 50-830/50 | Allnex | SETAL 50830/50 is a medium oil alkyd based on soya bean oil. Films based on Setal 50830/50 exhibit gloss, hardness and flexibility with a fast tack-free time and good durability. | Request Sample |
| SETAL® 53 | Allnex | SETAL® 53 is a Styrenated short oil alkyd with lacquer like dry for a wide range of air and force dry industrial metal coatings including hammer finishes. | Request Sample |
| SETAL® 53-027/55 | Allnex | SETAL® 53-027/55 is a fast dry urethane oil with high aliphatic solvent tolerance for clear wood varnishes and pigmented coatings including paving paints. | Request Sample |
| SETAL® 53-102/60 | Allnex | SETAL® 53-102/60 is a general purpose urethane modified long oil Soya based alkyd for interior clear timber varnishes and exterior pigmented fast dry enamels within Deco and light Industrial Metal segments. | Request Sample |
| SETAL® 53-108/60 | Allnex | SETAL® 53-108/60 is a general-purpose urethane alkyd with excellent abrasion resistance, good chemical, oil and solvent-resistance, chalking resistance and corrosion-resistance. | Request Sample |
| SETAL® 53-115/55 | Allnex | SETAL® 53-115/55 is a general purpose Urethane modified long oil alkyd for Decorative and light Industrial metal applications, both clear and pigmented finishes. | Request Sample |
| SETAL® 6306 SS-60 | Allnex | SETAL® 6306 SS-60 is a water-soluble polyester polyol with 2.7% OH for waterborne OEM basecoat applications. It provides good pigment wetting properties, good stabilization of aluminum pigments, and improves film formation and flow. This product is suit...展开 SETAL® 6306 SS-60 is a water-soluble polyester polyol with 2.7% OH for waterborne OEM basecoat applications. It provides good pigment wetting properties, good stabilization of aluminum pigments, and improves film formation and flow. This product is suitable for use in waterborne basecoats for the automotive OEM market and in wet-on-wet systems for car refinishing. 收起 | Request Sample |
| SETAL® 645/65 | Allnex | SETAL® 645/65 is a long oil pentaerythritol modified alkyd resin based on soya bean oil. | Request Sample |
| SETAL® 680/75 | Allnex | SETAL® 680/75 is a long oil pentaerythritol- modified alkyd resin based on soya bean oil. | Request Sample |
| SETAL® 690 | Allnex | SETAL® 690 is a water reduceable acrylated epoxy ester which has good compatability with acrylic emulsions and used to formulate metal primers and enamels, both air dry and baking systems. | Request Sample |
| SETAL® 7 | Allnex | SETAL® 7 is a polymeric wetting and dispersing agent for pigments which provides faster, finer dispersion with reduced settling at higher pigment loadings, quick premix wet-out and improved colour development. It finds application in most solvent based pa...展开 SETAL® 7 is a polymeric wetting and dispersing agent for pigments which provides faster, finer dispersion with reduced settling at higher pigment loadings, quick premix wet-out and improved colour development. It finds application in most solvent based paint systems and is particularly recommended for air-drying vehicles. SETAL 7 can also be utilised in applications in the vinyl industry. 收起 | Request Sample |
| SETAL® 707 BA-75 | Allnex | SETAL® 707 BA-75 is a medium oil tall oil fatty acid based alkyd. | Request Sample |
| SETAL® 726 | Allnex | SETAL® 726 is short oil alkyd for high quality metal stoving finishes. | Request Sample |
| SETAL® 81462 SS-55 | Allnex | SETAL® 81462 SS-55 is a slightly branched polyester polyol with 5.4% OH (calculated on non-volatiles), modified with sag control agent. | Request Sample |
| SETAL® 82 | Allnex | SETAL® 82 is a Styrenated short oil alkyd with lacquer like dry for a wide range of air and force dry industrial metal coatings including hammer finishes. | Request Sample |
| SETAL® 82166 SS-64 | Allnex | SETAL® 82166 SS-64 is a slightly branched polyester polyol with 5.4 % OH (calculated on non-volatiles), modified with sag control agent. | Request Sample |
| SETAL® 84 XX-70 | Allnex | SETAL® 84 XX-70 (formerly SETAL® 11-1184) is a short oil non-drying alkyd based upon synthetic fatty acids and designed for use in general industrial wood and metal finishes of ambient cure, force cure and baking types. | Request Sample |
| SETAL® 847 XX-70 | Allnex | SETAL® 847 XX-70 is a short-oil alkyd resin based on coconut oil with good color retention, good hardness and scratch resistance. | Request Sample |
| SETAL® 862 XX-70 | Allnex | SETAL® 862 XX-70 is a short-oil alkyd resin based on vegetable oil, with good hardness, fast curing and good storage stability. | Request Sample |
| SETAL® 90173 SS-50 | Allnex | SETAL® 90173 SS-50 is a saturated polyester resin, modified with sag control agent (SCA). Good compatibility with CAB, excellent rheology control, good metallic effect, good adhesion and flexibility. | Request Sample |
| SETAL® 91703 SS-53 | Allnex | SETAL® 91703 SS-53 is a saturated polyester resin, modified with 3 % sagging control agent (SCA). | Request Sample |
| SETAL® 91715 SS-55 | Allnex | SETAL® 91715 SS-55 is a saturated polyester resin, modified with sag control agent (SCA). | Request Sample |
| SETAL® 95 | Allnex | SETAL® 95 is a Acrylated short oil alkyd with lacquer like dry for a wide range of air and force dry industrial metal coatings and includes 1k maintenance ACE coatings with high durability. | Request Sample |
| SETAL® D RD 181 X | Allnex | SETAL® D RD 181 X is a polyester resin polyol for 2k Isocyanate coatings both pigmented and clear which have excellent weathering and yellowing resistance. It's also suitable for formulation of pigment pastes. | Request Sample |
| SETAL® D362/48 | Allnex | SETAL® D362/48 is a fast dry high performance urethane oil cut in aromatic free low odour solvent for Deco and Industrial applications. | Request Sample |
| SETAL® D645/63 | Allnex | SETAL® D645/63 is a Soya based long oil alkyd cut in low odour aromatic free solvent for Deco and Industrial applications. | Request Sample |
| SETAL® FL43/70 | Allnex | SETAL® FL43/70 is a low breakdown soya based long oil alkyd for general use within Deco and light Industrial applications. | Request Sample |
| SETAL® FL63/70 | Allnex | SETAL® FL63/70 is a medium breakdown soya based long oil alkyd for general use within Deco and light Industrial applications. | Request Sample |
| SETAL® FL66/70 | Allnex | SETAL® FL66/70 is a pure long oil alkyd resin based on soya-bean oil, which exhibits excellent durability, gloss and gloss retention, through dry and colour retention. | Request Sample |
| SETAL® FM59/70 | Allnex | SETAL® FM59/70 is a medium oil alkyd with a broad range compatability recommended as a grinding resin for industrial pigment concentrates. | Request Sample |
| SETAL® FS20/60 | Allnex | SETAL® FS20/60 is a linseed oil based rosin and phenolic modified alkyd for fast dry high gloss industrial coatings. | Request Sample |
| SETAL® FS25/50 | Allnex | SETAL® FS25/50 is an economical high drink soya oil based rosin and phenolic modified alkyd for rapid dry high gloss industrial coatings reco drum paints and shop primers. | Request Sample |
| SETAL® FS26/60 | Allnex | SETAL FS26/60 is a rosin-modified phenolated alkyd resin based on semi- drying oils, which combines economy of use with very fast dry, high gloss and high breakdown viscosity with aliphatic solvents. | Request Sample |
| SETAL® FS29/60 | Allnex | SETAL® FS29/60 is a resin-modified phenolated alkyd resin based on linseed oil, which combines economy of use with very fast dry, high gloss and excellent in-can stability. | Request Sample |
| SETAL® FS44/60 | Allnex | SETAL® FS44/60 is a phenolic rosin modified short oil Linseed alkyd for use in fast dry primers and gloss topcoats which is suitable for brush application as cut in a slower solvent so also suitable for Deco DTM and metal primers. | Request Sample |
| SETAL® FT674/45 | Allnex | SETAL® FT674/45 is a long oil soya oil based thixotropic alkyd used in typical LOA or urethane alkyd based Deco & Industrial coatings to control pigment settling and provide sag control on applicatiion to vertical surfaces. | Request Sample |
| SETAL® FU55/55 | Allnex | SETAL® FU55/55 is a urethane-modified alkyd resin based on soya-bean oil, which features the non-yellowing properties of a long oil alkyd combined with the fast surface- and through-dry of a polyurethane. | Request Sample |
| SETAL® FX60/70 | Allnex | SETAL® FX60/70 is a silicone modified soya oil based long oil alkyd for highly durable exterior enamels with increased heat resistance. | Request Sample |
| SETAL® FX75 | Allnex | SETAL® FX75 is a very long oil 100% NVM Isophthalic linseed oil based alkyd for stains and lithographic inks. | Request Sample |
| SETAL® FX7/65 | Allnex | SETAL® FX7/65 is a coumarone-indene varnish based on Tung oil with a low acid value used for applications including functional sealers and leafing aluminium grafitti blocking primers within Deco and Industrial segments. | Request Sample |
| SETAL® P700/40 | Allnex | SETAL® P700/40 is a high MW soya oil based alkyd for sealer undercoats with high hold out. A traditional alkyd used for flat interior wall finishes and ceiling paints. | Request Sample |
| SETALUX® 10-1302 | Allnex | SETALUX® 10-1302 is a low viscosity microgel that has very good application properties and is excellent in yellowing resistance. Its technical features include excellent application and sag resistance properties, outdoor durability and yellowing resistanc...展开 SETALUX® 10-1302 is a low viscosity microgel that has very good application properties and is excellent in yellowing resistance. Its technical features include excellent application and sag resistance properties, outdoor durability and yellowing resistance, and good flexibility and chemical resistance properties. This product is recommended for high solids metallic and solid color automotive OEM and car refinish basecoats. 收起 | Request Sample |
| SETALUX® 10-1440 | Allnex | SETALUX® 10-1440 is a higher percent active ketimine modified acrylic resin for use in the isocyanate-free 3.5 VOC Ketac primer system. SETALUX® 10-1440 is used in combination with SETALUX® 17-1450 or other acetoacetate functional acrylic or polyester res...展开 SETALUX® 10-1440 is a higher percent active ketimine modified acrylic resin for use in the isocyanate-free 3.5 VOC Ketac primer system. SETALUX® 10-1440 is used in combination with SETALUX® 17-1450 or other acetoacetate functional acrylic or polyester resin. Even lower VOC formulations are obtainable through use of exempt solvents and / or reactive diluents. 收起 | Request Sample |
| SETALUX® 10-6266 | Allnex | SETALUX® 10-6266 is rheology control resin for solventborne coatings. | Request Sample |
| SETALUX® 1151 XX-51 | Allnex | SETALUX® 1151 XX-51 is an acrylic polyol with 4.4 % OH (calculated on non-volatiles). SETALUX® 1151 XX-51 has excellent hardness, very good exterior durability, excellent mechanical properties, easy application facilities especially in airless-spray equip...展开 SETALUX® 1151 XX-51 is an acrylic polyol with 4.4 % OH (calculated on non-volatiles). SETALUX® 1151 XX-51 has excellent hardness, very good exterior durability, excellent mechanical properties, easy application facilities especially in airless-spray equipment and also under severe humidity conditions and low temperatures. 收起 | Request Sample |
| SETALUX® 1152 SS-51 | Allnex | SETALUX® 1152 SS-51 is an acrylic polyol with 4.2% OH for bicomponent coatings used in combination with aliphatic polyisocyanates. | Request Sample |
| SETALUX® 1160 XS-51 | Allnex | SETALUX® 1160 XS-51 is a hydroxylated acrylic resin with 3.6 % OH (on NV). | Request Sample |
| SETALUX® 1179 BA-57 | Allnex | SETALUX® 1179 BA-57 is an acrylic polyol with 1.7 % OH (calculated on non-volatiles). | Request Sample |
| SETALUX® 1182 SS-55 | Allnex | SETALUX® 1182 SS-55 is an acrylic polyol with 1.8 % OH (calculated on non-volatiles). Excellent adhesion to metals such as aluminium, steel, zinc plated steel, stainless steel. Good mechanical properties, good outdoor durability and quick drying. | Request Sample |
| SETALUX® 1184 SS-51 | Allnex | SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). | Request Sample |
| SETALUX® 1186 SS-60 | Allnex | SETALUX® 1186 SS-60 is an acrylic polyol with 3.0 % OH (calculated on non-volatiles). | Request Sample |
| SETALUX® 1187 XX-60 | Allnex | SETALUX® 1187 XX-60 is an acrylic polyol with 3.6 % OH (calculated on non-volatiles). | Request Sample |
| SETALUX® 1192 SS-60 | Allnex | SETALUX® 1192 SS-60 is an acrylic polyol with 3.8 % OH (calculated on non-volatiles). | Request Sample |
