UL Prospector

成功!

成功保存搜索结果
AR-515 Chan Sieh Enterprises Co, Ltd. AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics.
AR-518 Chan Sieh Enterprises Co, Ltd. AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters.
AR-523 Chan Sieh Enterprises Co, Ltd. AR-523 is a BMA copolymer resin featuring good water-resistance, low odor, and good outdoor durability. This product can be used in flexo and gravure printing inks, packaging inks, plastic coatings, and aluminum heat seal lacquers.
AR-531 Chan Sieh Enterprises Co, Ltd. AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...展开 AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 收起
AR-620 Chan Sieh Enterprises Co, Ltd. AR-620 is an acrylic resin printing binder in the form of a white emulsion. This product features long retention of film surface tack. It can be used to temporarily adhere fabrics to a printing board.
Copper Chromite Black P2028 Dongguan Hailerui Chemical Co., Ltd. Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints.
HVAMA Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to ...展开 HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. HVAMA is used primarily for air-dry finishes, such as maintenance, marine and metal coating, can sealed paint, wood and glass coating, metal inks, and adhesive for binder nails. 收起
Hailerui Cadmium Red P2018 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks.
Hailerui Cadmium Yellow P2037-1 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cadmium Yellow P2037-4 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cadmium Yellow P2037-5 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Permanent Violet P.V.23BL Dongguan Hailerui Chemical Co., Ltd. Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles.
Hailerui Permanent Violet P.V.23RL Dongguan Hailerui Chemical Co., Ltd. Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles.
Hailerui Phthalocyanine Blue P.B.15:0 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:1 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:2 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:3 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:4 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Green PG7 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste.
Hailerui Titanium Yellow 42-118A Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow K2001 Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow K2001FG Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow TY-300 Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Ultramarine Blue 5008 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-19 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-25 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-37 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue GP-58 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue RS-05 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue RS-06 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
L-2813 Chan Sieh Enterprises Co, Ltd. L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...展开 L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 收起
L-2842 Chan Sieh Enterprises Co, Ltd. L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings.
L-2869 Chan Sieh Enterprises Co, Ltd. L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...展开 L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 收起
L-2908 Chan Sieh Enterprises Co, Ltd. L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...展开 L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. 收起
L-2909 Chan Sieh Enterprises Co, Ltd. L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...展开 L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. 收起
L-2911 Chan Sieh Enterprises Co, Ltd. L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...展开 L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. 收起
L-2917 Chan Sieh Enterprises Co, Ltd. L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...展开 L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. 收起
L-2946 Chan Sieh Enterprises Co, Ltd. L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...展开 L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. 收起
L-2976 Chan Sieh Enterprises Co, Ltd. L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet.
L-2982 Chan Sieh Enterprises Co, Ltd. L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet.
L-2991 Chan Sieh Enterprises Co, Ltd. L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...展开 L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. 收起
L-2994 Chan Sieh Enterprises Co, Ltd. L-2994 is an aliphatic polyester polyol featuring good flexibility and adherence to plastic. This product is well suited for use in flexo and gravure printing inks.
L-3042 Chan Sieh Enterprises Co, Ltd. L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...展开 L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 收起
L-3410 Chan Sieh Enterprises Co, Ltd. L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...展开 L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 收起
L-3952 Chan Sieh Enterprises Co, Ltd. L-3952 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and BHMR. This product can be used in flat parquet lacquers, printing inks, and decorative paints.
LC-40 Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-...展开 LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-40 is usually dissolved in a relatively strong solvent/diluent combination, such as ketone solvent/aromatic diluent (50/50 percent by weight). LC-40 is used primarily for maintenance coatings, plastic coatings, heat-transfer paint, outdoor printing ink, and adhesive for magnetic card and cardboard. 收起
P-103 Chan Sieh Enterprises Co, Ltd. P-103 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing.
P-103H Chan Sieh Enterprises Co, Ltd. P-103H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing.
P-103H-1 Chan Sieh Enterprises Co, Ltd. P-103H-1 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
P-104 Chan Sieh Enterprises Co, Ltd. P-104 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
P-104H Chan Sieh Enterprises Co, Ltd. P-104H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
P-125U Chan Sieh Enterprises Co, Ltd. P-125U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
P-145U Chan Sieh Enterprises Co, Ltd. P-145U is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
P-155U Chan Sieh Enterprises Co, Ltd. P-155U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing.
P-2026 Chan Sieh Enterprises Co, Ltd. P-2026 is a vinyl acetate acrylic copolymer in the form of a white emulsion. This product has good color value and pigment adhesion. It can be used as a binder for pigment printing. It is suitable for cotton fabrics.
P-645 Chan Sieh Enterprises Co, Ltd. P-645 is a self-crosslinking acrylic resin in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing.
PB-145 Chan Sieh Enterprises Co, Ltd. PB-145 is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
PB-155 Chan Sieh Enterprises Co, Ltd. PB-155 is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing.
SMP-45 Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 45±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起
SMP-60 Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 60±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...展开 Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure 500 Lambson Group Ltd. Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slig...展开 Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slightly yellow liquid enables surface and depth cure as well as lower viscosity formulations for clear coatings, wood lacquers and printing inks. 收起
Speedcure 5040 Lambson Group Ltd. Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展开 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起
Speedcure 5070 Lambson Group Ltd. Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展开 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展开 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7010 Lambson Group Ltd. Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. ...展开 Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This cream to pale yellow free flowing powder inhibits low migration and yellowing in addition to adding depth cure in pigmented in thick films. It can be applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7010-L Lambson Group Ltd. Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow...展开 Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow liquid inhibits low migration and yellowing in addition to providing depth cure in pigmented and thick films. It is applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展开 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展开 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展开 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展开 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 976 Lambson Group Ltd. Speedcure 976 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in propylene carbonate. This yellow liquid enables a fast cure in inks and overprint varnishes. It is also more geared for thicker coatings and films.
Speedcure 976D Lambson Group Ltd. Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker ...展开 Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker coatings greater than 25μm. 收起
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展开 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展开 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展开 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展开 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展开 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展开 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展开 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展开 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展开 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EAQ Lambson Group Ltd. Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow ...展开 Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow powder cures without an amine-type hydrogen donor and has its effectiveness raised by the presence of oxygen. It is used in curing resists and printing inks that are acid treated post-cure. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展开 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展开 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EMK Lambson Group Ltd. Speedcure EMK is an efficient UV photoinitiator or hydrogen donor absorbing at 377 nm and used primarily in the electronics sector. This pale yellow solid enables a fast cure in cure resists and printing inks.
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...展开 Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure MBB Lambson Group Ltd. Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid...展开 Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid surface cure and ideal for food packing printing inks due to its minimal odor. It can be used in printing inks, decorative coatings for metal cans and food cartons as well as clear over print and wood varnishes. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展开 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展开 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展开 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure TPO Lambson Group Ltd. Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick f...展开 Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick films. It is applied to wood coatings and filler, glass fibre reinforced polyester laminates, manufacture of printing plates and pigmented printing inks. 收起
Speedcure TPO-L Lambson Group Ltd. Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This ...展开 Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This yellow liquid cures coating containing titanium dioxide, is a safer cure for opaque systems and gives a good through-cure. It is applied to UV offset and flexo inks, white pigmented UV lacquers, UV screen inks, UV overprint varnishes and printing plates. 收起
Speedcure XFe Lambson Group Ltd. Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odo...展开 Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odour and volatility while maintaining high cure speed. 收起
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...展开 Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. 收起
Speedcure XFw Lambson Group Ltd. Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubil...展开 Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubility in many ink and resin systems. The product can be used for all UV flexo, screen and off-set inks; white pigmented UV lacquers and other white pigmented systems while exhibiting little odour and non-yellowing post curing. 收起
Speedcure XKm Lambson Group Ltd. Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, i...展开 Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, it exhibits little yellowing, volatility and odour while curing white pigmented coatings, clear coatings and pigmented printing inks. 收起
Uvi-Cure S105E Lambson Group Ltd. Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This...展开 Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This pale yellow to colourless transparent liquid, when cured with cationic photoinitiators, can provide a clear, hard, glossy coating in addition to adhesion and flexibility uses. 收起
Uvi-Cure S110-LV Lambson Group Ltd. Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起