| HVAMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to ...展开 HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. HVAMA is used primarily for air-dry finishes, such as maintenance, marine and metal coating, can sealed paint, wood and glass coating, metal inks, and adhesive for binder nails. 收起 | |
| LC-40 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-...展开 LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-40 is usually dissolved in a relatively strong solvent/diluent combination, such as ketone solvent/aromatic diluent (50/50 percent by weight). LC-40 is used primarily for maintenance coatings, plastic coatings, heat-transfer paint, outdoor printing ink, and adhesive for magnetic card and cardboard. 收起 | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展开 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...展开 Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...展开 Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. 收起 | |
| Polurgreen FP75-01 | S.A.P.I.C.I. SpA | Polurgreen FP75-01 is a polyurethane adduct. This product contains less than .1% TDI isocyanates. It may be used in 2K adhesives and inks. Polurgreen FP75-01 is in accord with EU, BFR, and FDA regulations for food packaging. | |
| Rexin K 1939 | S.A.P.I.C.I. SpA | Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the for...展开 Rexin K 1939 is a solvent-based hydroxy-terminated saturated polyester resin. When used in the formulation of inks, this product's end result is light, clear, not sticky and highly resistant to aging, chemical agents, and heat. It can be used in the formulation of 2K polyurethane overprinting lacquers and inks. 收起 | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...展开 Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. 收起 | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Rexin K 6302 | S.A.P.I.C.I. SpA | Rexin K 6302 is a polyester resin. This product is soluble in ethyl acetate. It can be used in the formulation of inks and overprint varnishes. | |
| SMP-45 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 45±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起 | |
| SMP-60 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 60±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起 | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...展开 Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. 收起 | |
| Ucopol OL 100 | S.A.P.I.C.I. SpA | Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing ink...展开 Ucopol OL 100 is an oleo-urethanic resin. This product has good wetting properties. It can be used as an impregnating agent for wood, and in the formulation of 1K enamels with high solids content. It can also be used for the formulation of printing inks and pigmented pastes. This product has been obtained from renewable raw materials. 收起 | |
| Uvi-Cure S105E | Lambson Group Ltd. | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S110-LV | Lambson Group Ltd. | Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起 | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Lambson Group Ltd. | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| VAM | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester...展开 VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VAM is used for can sealed paint, shoe adhesive, floor paint, silk screen printing, and transfer ink, as well as electro-chemical aluminum paint, and thermal transfer adhesive. 收起 | |
| VMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields t...展开 VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields the balance of solubility and viscosity properties needed for high-build, air-dry maintenance finishes, and is often used to make coatings and adhesives applications where higher solids are desirable. VMA can be used in air-dry finishes, such as maintenance, marine, and metal coatings. It is also used in interbedded adhesives, thermal transfer adhesives, shoe adhesives, ink-jet and metal inks. 收起 | |
| VMC | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, a...展开 VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VMC is used for air-dry finishes, such as maintenance, marine, metal, and can coatings, as well as interbedded adhesives, thermal transfer adhesives, shoe adhesives, and metal inks. 收起 |
