UL Prospector

成功!

成功保存搜索结果
Copper Chromite Black P2028 Dongguan Hailerui Chemical Co., Ltd. Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints.
HVAMA Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to ...展开 HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. HVAMA is used primarily for air-dry finishes, such as maintenance, marine and metal coating, can sealed paint, wood and glass coating, metal inks, and adhesive for binder nails. 收起
Hailerui Cadmium Red P2018 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks.
Hailerui Cadmium Yellow P2037-1 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cadmium Yellow P2037-4 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Cadmium Yellow P2037-5 Dongguan Hailerui Chemical Co., Ltd. Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks.
Hailerui Permanent Violet P.V.23BL Dongguan Hailerui Chemical Co., Ltd. Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles.
Hailerui Permanent Violet P.V.23RL Dongguan Hailerui Chemical Co., Ltd. Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles.
Hailerui Phthalocyanine Blue P.B.15:0 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:1 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:2 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:3 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Blue P.B.15:4 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints.
Hailerui Phthalocyanine Green PG7 Dongguan Hailerui Chemical Co., Ltd. Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste.
Hailerui Titanium Yellow 42-118A Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow K2001 Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow K2001FG Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Titanium Yellow TY-300 Dongguan Hailerui Chemical Co., Ltd. Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks.
Hailerui Ultramarine Blue 5008 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-19 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-25 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue EP-37 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue GP-58 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue RS-05 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
Hailerui Ultramarine Blue RS-06 Dongguan Hailerui Chemical Co., Ltd. Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks.
K-FLEX® 500P Emerald Performance Materials K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or...展开 K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical. It can also be used in adhesives, plastisols and other applications requiring a polar plasticizer with a lower VOC content. 收起
K-FLEX® 850P Emerald Performance Materials K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polyme...展开 K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polymer sealants. It is also suitable for use in latex adhesives, latex caulks and sealants and architectural and graphic arts coatings. 收起
K-FLEX® 850S Emerald Performance Materials K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and seala...展开 K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and sealants and overprint varnishes. It has full FDA approvals for adhesives and was designed to assist the formulator on issues of VOC reduction. 收起
K-FLEX® 975P Emerald Performance Materials K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plas...展开 K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plastisol inks, architectural latex coatings as a low VOC coalescent/plasticizer, other coatings including graphic arts applications such as waterborne overprint varnish and waterborne flexographic ink. It can also be used as a low VOC coalescent for paint and coating dispersions. 收起
K-FLEX® DP Emerald Performance Materials K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealan...展开 K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealants, coatings and screen-printing plastisol inks. 收起
K-FLEX® PG Emerald Performance Materials K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex...展开 K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex coatings. 收起
Kalama® Benzyl Alcohol NF/FCC Emerald Performance Materials Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for ep...展开 Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. 收起
Kalama® Benzyl Alcohol Technical Grade Emerald Performance Materials Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. I...展开 Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. 收起
LC-40 Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-...展开 LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-40 is usually dissolved in a relatively strong solvent/diluent combination, such as ketone solvent/aromatic diluent (50/50 percent by weight). LC-40 is used primarily for maintenance coatings, plastic coatings, heat-transfer paint, outdoor printing ink, and adhesive for magnetic card and cardboard. 收起
SMP-45 Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 45±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起
SMP-60 Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 60±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...展开 Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure 500 Lambson Group Ltd. Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slig...展开 Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slightly yellow liquid enables surface and depth cure as well as lower viscosity formulations for clear coatings, wood lacquers and printing inks. 收起
Speedcure 5040 Lambson Group Ltd. Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展开 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起
Speedcure 5070 Lambson Group Ltd. Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展开 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展开 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7010 Lambson Group Ltd. Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. ...展开 Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This cream to pale yellow free flowing powder inhibits low migration and yellowing in addition to adding depth cure in pigmented in thick films. It can be applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7010-L Lambson Group Ltd. Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow...展开 Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow liquid inhibits low migration and yellowing in addition to providing depth cure in pigmented and thick films. It is applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展开 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展开 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展开 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展开 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 976 Lambson Group Ltd. Speedcure 976 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in propylene carbonate. This yellow liquid enables a fast cure in inks and overprint varnishes. It is also more geared for thicker coatings and films.
Speedcure 976D Lambson Group Ltd. Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker ...展开 Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker coatings greater than 25μm. 收起
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展开 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展开 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展开 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展开 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展开 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展开 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展开 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展开 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展开 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EAQ Lambson Group Ltd. Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow ...展开 Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow powder cures without an amine-type hydrogen donor and has its effectiveness raised by the presence of oxygen. It is used in curing resists and printing inks that are acid treated post-cure. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展开 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展开 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EMK Lambson Group Ltd. Speedcure EMK is an efficient UV photoinitiator or hydrogen donor absorbing at 377 nm and used primarily in the electronics sector. This pale yellow solid enables a fast cure in cure resists and printing inks.
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...展开 Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure MBB Lambson Group Ltd. Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid...展开 Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid surface cure and ideal for food packing printing inks due to its minimal odor. It can be used in printing inks, decorative coatings for metal cans and food cartons as well as clear over print and wood varnishes. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展开 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展开 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展开 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure TPO Lambson Group Ltd. Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick f...展开 Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick films. It is applied to wood coatings and filler, glass fibre reinforced polyester laminates, manufacture of printing plates and pigmented printing inks. 收起
Speedcure TPO-L Lambson Group Ltd. Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This ...展开 Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This yellow liquid cures coating containing titanium dioxide, is a safer cure for opaque systems and gives a good through-cure. It is applied to UV offset and flexo inks, white pigmented UV lacquers, UV screen inks, UV overprint varnishes and printing plates. 收起
Speedcure XFe Lambson Group Ltd. Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odo...展开 Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odour and volatility while maintaining high cure speed. 收起
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...展开 Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. 收起
Speedcure XFw Lambson Group Ltd. Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubil...展开 Speedcure XFw is a transparent pale yellow liquid liquid Type I photoinitiator for use in white inks and coatings. It is a high performance, easy to handle liquid system that provides high reactivity, efficient through cure, low yellowing and good solubility in many ink and resin systems. The product can be used for all UV flexo, screen and off-set inks; white pigmented UV lacquers and other white pigmented systems while exhibiting little odour and non-yellowing post curing. 收起
Speedcure XKm Lambson Group Ltd. Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, i...展开 Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, it exhibits little yellowing, volatility and odour while curing white pigmented coatings, clear coatings and pigmented printing inks. 收起
Synpol B-10 Synpol Products PVT. Ltd Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起
Synpol B-30 Synpol Products PVT. Ltd Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起
Synpol B-60 Synpol Products PVT. Ltd Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起
Synpol B-722 Synpol Products PVT. Ltd Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起
Synpol B-723 Synpol Products PVT. Ltd Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展开 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起
Synpol L-9 Synpol Products PVT. Ltd Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications.
Uvi-Cure S105E Lambson Group Ltd. Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This...展开 Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This pale yellow to colourless transparent liquid, when cured with cationic photoinitiators, can provide a clear, hard, glossy coating in addition to adhesion and flexibility uses. 收起
Uvi-Cure S110-LV Lambson Group Ltd. Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起
Uvi-Cure S128 Lambson Group Ltd. Uvi-Cure S128 is a standard cycloaliphatic epoxide resin that contains an adipate chain that can make formulations of this product more flexible. When this product is combined with photoinitiators it can yield a clear, flexible, glossy coating in addition...展开 Uvi-Cure S128 is a standard cycloaliphatic epoxide resin that contains an adipate chain that can make formulations of this product more flexible. When this product is combined with photoinitiators it can yield a clear, flexible, glossy coating in addition to combinations of flexibility and hardness. It is used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants as well as flexo, screen and ink jet inks 收起
UviCure S105 Lambson Group Ltd. UviCure S105 is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low v...展开 UviCure S105 is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起
VAM Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester...展开 VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VAM is used for can sealed paint, shoe adhesive, floor paint, silk screen printing, and transfer ink, as well as electro-chemical aluminum paint, and thermal transfer adhesive. 收起
VMA Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields t...展开 VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields the balance of solubility and viscosity properties needed for high-build, air-dry maintenance finishes, and is often used to make coatings and adhesives applications where higher solids are desirable. VMA can be used in air-dry finishes, such as maintenance, marine, and metal coatings. It is also used in interbedded adhesives, thermal transfer adhesives, shoe adhesives, ink-jet and metal inks. 收起
VMC Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, a...展开 VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VMC is used for air-dry finishes, such as maintenance, marine, metal, and can coatings, as well as interbedded adhesives, thermal transfer adhesives, shoe adhesives, and metal inks. 收起