| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展开 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展开 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展开 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展开 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展开 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展开 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展开 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展开 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展开 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展开 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TPO | Eutec Chemical Co., Ltd. | Photocure TPO is a clear solution yellow crystalline powder of 2,4,6-trimethylbenzoyldiphenylphosphine oxide with a melting point between 87-93℃. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TPO-L | Eutec Chemical Co., Ltd. | Photocure TPO-L is a clear solution yellow liquid of Ethyl (2,4,6-trimethylbenzoyl)phenylphosphinate. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TZT | Eutec Chemical Co., Ltd. | Photocure TZT (2,4,6-Trimethylbenzophenone Methyl benzophenone Benzophenone) is a pale yellow odorless liquid. This product is used as a photoinitiator in UV-cured resins, inks and coatings. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| S-Butyl Acetate (SBA) | TOP Solvent Company Limited | S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起 | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Texicryl® 13-503 | Scott Bader | Texicryl® 13-503 is designed for printing inks and non absorbent, low energy substrates, gives excellent wet rub performance. | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| Texicryl® 13-809 | Scott Bader | Texicryl® 13-809 is a hard emulsion for high gloss, fast drying coatings, OPV’s and inks. Can be used as deblocking modifier. | |
| Texicryl® 13-812 | Scott Bader | Texicryl® 13-812 is a high efficiency alkali soluble binder for flexographic printing of cartons and paper sacks. | |
| Texicryl® 13-813 | Scott Bader | Texicryl® 13-813 is a low odour, soft polymer with superior gloss and holdout for use in verprint varnishes. Heat sealable. | |
| Texicryl® 13-814 | Scott Bader | Texicryl® 13-814 is a soft polymer with excellent water barrier properties for OPV’s and inks. Heat sealable. Very low Cobb value. Low slip coefficient. | |
| Texicryl® 13-819 | Scott Bader | Texicryl® 13-819 is an emulsion vehicle with unique plasticiser technology. Good heat/blocking resistance, for highest gloss applications. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...展开 Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. 收起 | |
| Texipol® 63-201 | Scott Bader | Texipol® 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-202 | Scott Bader | Texipol® 63-202 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-237 | Scott Bader | Texipol® 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. | |
| Texipol® 63-258 | Scott Bader | Texipol® 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-259 | Scott Bader | Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost insta...展开 Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost instantaneous thickening when mixed directly into water-based formulations. 收起 | |
| Texipol® 63-510 | Scott Bader | Texipol® 63-510 is an inverse emulsion designed to thicken over a wide pH range, exceptional performance at low pH. | |
| Texipol® 63-513 | Scott Bader | Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as t...展开 Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer. Texipol® 63-513 shows broad pH compatibility. 收起 | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| Toluene | TOP Solvent Company Limited | Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展开 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PM | TOP Solvent Company Limited | TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展开 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PMA | TOP Solvent Company Limited | TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展开 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. | |
| WS 200 | TOP Solvent Company Limited | WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and...展开 WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and aromatics.The primary use of this product is in printing inks, paints and coatings. 收起 | |
| Xylene | TOP Solvent Company Limited | Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is ...展开 Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is highly flammable and has a similar odor to gasoline. Xylene is primarily used in printing inks, adhesives, paints and coatings. 收起 |
