| 2-Pyrrolidone (2-P), Crystal | Shanghai Qifuqing Materials Technology Co., Ltd. | 2-Pyrrolidone (2-P), Crystal, in the form of a colorless to yellowish crystalline powder, is a solvent and synthetic intermediate. This product can be used in painting inks, and it is soluble in water, alcohol, ether, chloroform and benzene, but is insolu...展开 2-Pyrrolidone (2-P), Crystal, in the form of a colorless to yellowish crystalline powder, is a solvent and synthetic intermediate. This product can be used in painting inks, and it is soluble in water, alcohol, ether, chloroform and benzene, but is insoluble in mineral ethers. It has a flash point of 129°C and a boiling point of 245°C. 收起 | |
| 2-Pyrrolidone (2-P), Liquid | Shanghai Qifuqing Materials Technology Co., Ltd. | 2-Pyrrolidone (2-P), Liquid, in the form of a colorless to yellowish liquid, is a solvent and synthetic intermediate. This product can be used in painting inks, and it is soluble in water, alcohol, ether, chloroform and benzene, but is insoluble in minera...展开 2-Pyrrolidone (2-P), Liquid, in the form of a colorless to yellowish liquid, is a solvent and synthetic intermediate. This product can be used in painting inks, and it is soluble in water, alcohol, ether, chloroform and benzene, but is insoluble in mineral ethers. It has a flash point of 129°C and a boiling point of 245°C. 收起 | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展开 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展开 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Copper Chromite Black P2028 | Dongguan Hailerui Chemical Co., Ltd. | Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints. | |
| FR50 | Sino-American Pigment Systems, Inc. | FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| FR52 | Sino-American Pigment Systems, Inc. | FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| FR54 | Sino-American Pigment Systems, Inc. | FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| FR56 | Sino-American Pigment Systems, Inc. | FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| FR58 | Sino-American Pigment Systems, Inc. | FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| FR60 | Sino-American Pigment Systems, Inc. | FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| FR62 | Sino-American Pigment Systems, Inc. | FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| FR64 | Sino-American Pigment Systems, Inc. | FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| Glass Beads, Type III | Sino-American Pigment Systems, Inc. | Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 an...展开 Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 and 2.6 g/cm3 and its compressive strength is greater than 1200N. 收起 | |
| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-5 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Permanent Violet P.V.23BL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Permanent Violet P.V.23RL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Phthalocyanine Blue P.B.15:0 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:2 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:3 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Green PG7 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste. | |
| Hailerui Titanium Yellow 42-118A | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001FG | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow TY-300 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Ultramarine Blue 5008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-19 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-25 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-37 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue GP-58 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-05 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-06 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| N-Vinylpyrrolidone, Excellent Grade | Shanghai Qifuqing Materials Technology Co., Ltd. | N-Vinylpyrrolidone, Excellent Grade, in the form of a transparent, colorless to yellowish liquid, is a curing agent. This product can be used in inks, adhesives, and in UV-coatings for metal. It has a melting point of 14°C, and is easily soluble in water ...展开 N-Vinylpyrrolidone, Excellent Grade, in the form of a transparent, colorless to yellowish liquid, is a curing agent. This product can be used in inks, adhesives, and in UV-coatings for metal. It has a melting point of 14°C, and is easily soluble in water or organic solvents. 收起 | |
| N-Vinylpyrrolidone, First Grade | Shanghai Qifuqing Materials Technology Co., Ltd. | N-Vinylpyrrolidone, First Grade, in the form of a transparent, colorless to yellowish liquid, is a curing agent. This product can be used in inks, adhesives, and in UV-coatings for metal. It has a melting point of 14°C, and is easily soluble in water or o...展开 N-Vinylpyrrolidone, First Grade, in the form of a transparent, colorless to yellowish liquid, is a curing agent. This product can be used in inks, adhesives, and in UV-coatings for metal. It has a melting point of 14°C, and is easily soluble in water or organic solvents. 收起 | |
| PVP-K15, Powder | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-K15, Powder, in the form of a white powder, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 12-18 and a so...展开 PVP-K15, Powder, in the form of a white powder, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 12-18 and a solid content of >95%. 收起 | |
| PVP-K15, Solution | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-K15, Solution in the form of an aqueous solution, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 12-18 an...展开 PVP-K15, Solution in the form of an aqueous solution, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 12-18 and a solid content of 40±1%. 收起 | |
| PVP-K30, Powder | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-K30, Powder, in the form of a white powder, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 27-33 and a so...展开 PVP-K30, Powder, in the form of a white powder, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 27-33 and a solid content of >95%. 收起 | |
| PVP-K30, Solution | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-K30, Solution, in the form of an aqueous solution, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 27-33 a...展开 PVP-K30, Solution, in the form of an aqueous solution, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 27-33 and a solid content of 30±1%. 收起 | |
| PVP-K90, Powder | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-K90, Powder, in the form of a white powder, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 88-96 and a so...展开 PVP-K90, Powder, in the form of a white powder, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 88-96 and a solid content of >95%. 收起 | |
| PVP-K90, Solution | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-K90, Solution, in the form of an aqueous solution, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 90-103 ...展开 PVP-K90, Solution, in the form of an aqueous solution, is a homopolymer of vinylpyrrolidone. This product can be used in adhesives, printing inks, paint and coating applications. It is soluble in water or various organic solvents, has a K value of 90-103 and a solid content of 20±1%. 收起 | |
| PVP-SH3 | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-SH3, in the form of a transparent, colorless to yellowish liquid, is a polymer of N-Vinylpyrrolidone. This product can be used as a dispersant in textile dying. It is miscible with water and ethanol, and it has a cloud point of 40°C. | |
| PVP-SH4 | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-SH4, in the form of a transparent, colorless or yellowish liquid, is a polymer of N-Vinylpyrrolidone. This product can be used as a dispersant in textile dying. It is miscible with water and ethanol, and it has a cloud point of 40°C. | |
| PVP-SH5 | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-SH5, in the form of a transparent, colorless to yellowish liquid, is a polymer of N-Vinylpyrrolidone. This product can be used as a dispersant in textile dying. It is miscible with water and ethanol, and it has a cloud point of 40°C. | |
| PVP-VA37E | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-VA37E, in the form of a solution, is a copolymer blend of vinylpyrrolidone and vinyl acetate. This product can be used in adhesives, printing inks, and as a binder in coatings. It has a K value of 28-36 and a VP/VA (w/w) of 30/70. | |
| PVP-VA55E | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-VA55E, in the form of a solution, is a copolymer blend of vinylpyrrolidone and vinyl acetate. This product can be used in adhesives, printing inks, and as a binder in coatings. It has a K value of 28-36 and a VP/VA (w/w) of 50/50. | |
| PVP-VA64 Powder | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-VA64 Powder, in the form of a white powder, is a copolymer blend of vinylpyrrolidone and vinyl acetate. This product can be used in adhesives, printing inks, and as a binder in coatings. It has a K value of 26-34 and a VP/VA (w/w) of 60/40. | |
| PVP-VA64E | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-VA64E, in the form of a solution, is a copolymer blend of vinylpyrrolidone and vinyl acetate. This product can be used in adhesives, printing inks, and as a binder in coatings. It has a K value of 30-36 and a VP/VA (w/w) of 60/40. | |
| PVP-VA73E | Shanghai Qifuqing Materials Technology Co., Ltd. | PVP-VA73E, in the form of a solution, is a copolymer blend of vinylpyrrolidone and vinyl acetate. This product can be used in adhesives, printing inks, and as a binder in coatings. It has a K value of 30-38 and a VP/VA (w/w) of 70/30. | |
| R208 | Sino-American Pigment Systems, Inc. | R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil ab...展开 R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil absorption. 收起 | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展开 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展开 RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展开 RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
| RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展开 RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展开 RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展开 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展开 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展开 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展开 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展开 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展开 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展开 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展开 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展开 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| SR50 | Sino-American Pigment Systems, Inc. | SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| SR52 | Sino-American Pigment Systems, Inc. | SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| SR54 | Sino-American Pigment Systems, Inc. | SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| SR56 | Sino-American Pigment Systems, Inc. | SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| SR58 | Sino-American Pigment Systems, Inc. | SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| SR60 | Sino-American Pigment Systems, Inc. | SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| SR62 | Sino-American Pigment Systems, Inc. | SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| SR64 | Sino-American Pigment Systems, Inc. | SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| White Cloud® 30 LITHOPONE | Sino-American Pigment Systems, Inc. | White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne...展开 White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne UV, EB and thermoset systems for paints, coatings, and inks from primers to finish coats. It offers fineness and good dispersibility in a co-crystalline particle with a high light-scattering and refractive index. 收起 | |
| White Cloud® SAFE YELLOW 65-c | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 65-c, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior or exterior latex applications, alkyd and acrylic coatings, and flexographic, g...展开 White Cloud® SAFE YELLOW 65-c, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior or exterior latex applications, alkyd and acrylic coatings, and flexographic, gravure or lithographic thermoset or UV-cured printing ink formulations. It is an inorganic pigment with a monoarylide yellow PY-65 shell that provides the chemical stability, thermostability, and abrasion resistance of inorganic pigments with the brightness, luster and tinting strength of organic pigments. 收起 | |
| White Cloud® SAFE YELLOW 74-HEI | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 74-HEI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in industrial coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure ...展开 White Cloud® SAFE YELLOW 74-HEI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in industrial coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure or lithographic thermoset or UV-cured printing ink formulations. It is a colored inorganic pigment encapsulated with a monoarylide yellow PY-74 shell, which provides the chemical stability, heat stability, and abrasion resistance of inorganic pigments with the brightness, luster, and tinting strength of an organic pigment. 收起 | |
| White Cloud® SAFE YELLOW 83-CI | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 83-CI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure and ...展开 White Cloud® SAFE YELLOW 83-CI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure and lithographic thermoset or UV-cured printing ink formulations. It is a colored inorganic pigment encapsulated in a diarylide yellow PY-83 shell, which provides the chemical stability, heat stability, and abrasion resistance of inorganic pigments, with the brightness, luster and tinting strength of organic pigments. 收起 | |
| White Cloud® SYIC-c | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...展开 White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. 收起 | |
| White Cloud® SYIC-h | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...展开 White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. 收起 |
