| Copper Chromite Black P2028 | Dongguan Hailerui Chemical Co., Ltd. | Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints. | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-5 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Permanent Violet P.V.23BL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Permanent Violet P.V.23RL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Phthalocyanine Blue P.B.15:0 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:2 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:3 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Green PG7 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste. | |
| Hailerui Titanium Yellow 42-118A | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001FG | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow TY-300 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Ultramarine Blue 5008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-19 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-25 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-37 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue GP-58 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-05 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-06 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展开 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展开 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展开 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展开 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| SLK-DF50FT | Jiande Silicone Import & Export Co., Ltd. | SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based sys...展开 SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based systems. 收起 | |
| SLK-LA3033 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3033 is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provid...展开 SLK-LA3033 is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provides good substrate wetting even of critical substrates. It also increases anti-crater performance and surface slip by reduction of surface tension. In addition, it improves gloss, scratch resistance and anti-blocking. It is suitable for use in applications ranging from protective coatings in marine, architectural and automotive OEM coatings to automotive refinish, industrial and wood and furniture coatings. 收起 | |
| SLK-LA3033-6# | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3033-6# is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which pro...展开 SLK-LA3033-6# is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provides good substrate wetting even of critical substrates. It also increases anti-crater performance and surface slip by reduction of surface tension. In addition, it improves gloss, scratch resistance and anti-blocking. It is suitable for use in applications ranging from protective coatings in marine, architectural and automotive OEM coatings to automotive refinish, industrial and wood and furniture coatings. 收起 | |
| SLK-LA3035 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3035 is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in paints, inks and coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-b...展开 SLK-LA3035 is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in paints, inks and coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiation curing applications and is suitable for solvent-borne, clear coat and pigmented applications 收起 | |
| SLK-LA3307X | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3307X is an amber-colored, clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems. It provides good substrate wetting, prevents cratering...展开 SLK-LA3307X is an amber-colored, clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems. It provides good substrate wetting, prevents cratering, and increases surface slip. It is suitable for solvent-free applications, or applications where a solvent already exists. It can be used in protective and marine coatings, architectural coatings and wood and furniture coatings. 收起 | |
| SLK-WA3071 | Jiande Silicone Import & Export Co., Ltd. | SLK-WA3071 is a clear liquid, composed of trisiloxane and polyether-modified polydimethylsiloxane, used for improving substrate wetting for water-borne coatings and allowing easier application on difficult substrates. It also acts as a flow and leveling m...展开 SLK-WA3071 is a clear liquid, composed of trisiloxane and polyether-modified polydimethylsiloxane, used for improving substrate wetting for water-borne coatings and allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for paints, inks and coatings. It is dispersable in water, creating a lower surface tension for use in water reducible flexographic and rotographic inks. 收起 | |
| SLK-WA3072 | Jiande Silicone Import & Export Co., Ltd. | SLK-WA3072 is a clear liquid comprised of trisiloxane and polyether modified polydimethylsiloxane. It improves the wetting of water-borne coatings, allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for pain...展开 SLK-WA3072 is a clear liquid comprised of trisiloxane and polyether modified polydimethylsiloxane. It improves the wetting of water-borne coatings, allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for paints, inks and coatings. It is dispersable in water, creating a lower surface tension for use in water reducible flexographic and rotographic inks. 收起 |
