| BA01-01 | Luohe Xingmao Titanium Industry Co., Ltd. | BA01-01 is an aluminum ferrous sulphate coating that is a white powder, nontoxic and tasteless, with a stable chemical property. It is characterized by excellent gloss, whiteness, and water dispersity. It is recommended for use in water-based and solvent-...展开 BA01-01 is an aluminum ferrous sulphate coating that is a white powder, nontoxic and tasteless, with a stable chemical property. It is characterized by excellent gloss, whiteness, and water dispersity. It is recommended for use in water-based and solvent-based coatings, which are used in interior or prime coat without high requirements for weather resistance, printing ink, paper making, plastics, masterbatch, rubber, and chemical fiber. 收起 | |
| Benzidine Yellow GF1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GF1201 is a diarylide aniline yellow pigment that has high transparency and high tinting strength. The oil absorption of this pigment is 40-50 ml/100g and it has a pH value of 6.0-7.0. This product has a strong resistance to alkali and ac...展开 Benzidine Yellow GF1201 is a diarylide aniline yellow pigment that has high transparency and high tinting strength. The oil absorption of this pigment is 40-50 ml/100g and it has a pH value of 6.0-7.0. This product has a strong resistance to alkali and acid, and it is recommended to be used in offset inks. 收起 | |
| Benzidine Yellow GS1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1201 is a yellow pigment that has high color strength and good liquidity. This pigment has strong physical properties with a density of 1.5 g/cm3, an oil absorption between 40-50 ml/100g, and a pH value of 6.0-7.0. It is commonly used i...展开 Benzidine Yellow GS1201 is a yellow pigment that has high color strength and good liquidity. This pigment has strong physical properties with a density of 1.5 g/cm3, an oil absorption between 40-50 ml/100g, and a pH value of 6.0-7.0. It is commonly used in solvent-based inks. 收起 | |
| Benzidine Yellow GS1301 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1301 is a diarylide yellow pigment that has high transparency, high color strength and good liquidity. This pigment has a chemical base of disazo and is commonly used in solvent-based inks. | |
| Benzidine Yellow GS1401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1401 is a yellow pigment that has high tinting strength with good liquidity. It has strong physical properties with an oil absorption rate between 35-45 ml/100g, a density of 1.6 g/cm3, and a pH value of 6.0-8.0. This pigment is semi-tr...展开 Benzidine Yellow GS1401 is a yellow pigment that has high tinting strength with good liquidity. It has strong physical properties with an oil absorption rate between 35-45 ml/100g, a density of 1.6 g/cm3, and a pH value of 6.0-8.0. This pigment is semi-transparent and is recommended to be used in solvent-based inks. 收起 | |
| Benzidine Yellow GS1402 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1402 is a yellow pigment that has high-transparency, high tinting strength, and great liquidity. This product is recommended for use in solvent-based inks as it has strong physical properties such as a pH Value of 6.0-8.0 and a density ...展开 Benzidine Yellow GS1402 is a yellow pigment that has high-transparency, high tinting strength, and great liquidity. This product is recommended for use in solvent-based inks as it has strong physical properties such as a pH Value of 6.0-8.0 and a density of 1.6 g/cm3. 收起 | |
| Benzidine Yellow GW1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1201 is a diarylide aniline yellow pigment that has a chemical nature of disazo. This product will provide high transparency and high tinting strength. It is recommended to be used in water-based inks and has strong physical properties ...展开 Benzidine Yellow GW1201 is a diarylide aniline yellow pigment that has a chemical nature of disazo. This product will provide high transparency and high tinting strength. It is recommended to be used in water-based inks and has strong physical properties with an oil absorption rate of 40-50 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW1301 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1301 is a diarylide yellow pigment that provides high tenting strength and high transparency. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to acid, alkali and alc...展开 Benzidine Yellow GW1301 is a diarylide yellow pigment that provides high tenting strength and high transparency. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to acid, alkali and alcohol and also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW1401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1401 is a diarylide yellow pigment that provides high transparency and high tinting strength. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to alcohol, acid, and a...展开 Benzidine Yellow GW1401 is a diarylide yellow pigment that provides high transparency and high tinting strength. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to alcohol, acid, and also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW7401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW7401 is a yellow pigment that is semi transparent, and is highly resistant to alcohol, acid, and benzene. This product is recommended to be used in water-based inks. It also has strong physical properties with an oil absorption rate of ...展开 Benzidine Yellow GW7401 is a yellow pigment that is semi transparent, and is highly resistant to alcohol, acid, and benzene. This product is recommended to be used in water-based inks. It also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展开 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Crestacryl® 71-8026 | Scott Bader | Crestacryl® 71-8026 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9044 | Scott Bader | Crestacryl® 71-9044 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9076 | Scott Bader | Crestacryl® 71-9076 has very rapid solvent release and drive-over ability; resin has excellent hardness, very good elasticity and adhesion. It is a high grade road-marking paint. | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...展开 Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. 收起 | |
| Crestakyd® 10-0504 | Scott Bader | Crestakyd® 10-0504 is a 100% solids alkyd for low VOC exterior paints and wood stains | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-1025 | Scott Bader | Crestakyd® 10-1025 is used for economical gloss paints and primers. | |
| Crestakyd® 10-1066 | Scott Bader | Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats,...展开 Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes. 收起 | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2023 | Scott Bader | Crestakyd® 10-2023 is suitable for high solids wood stains and varnishes giving excellent durability. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 20-9509 | Scott Bader | Crestakyd® 20-9509 is a wood finishing alkyd used for lower VOC coatings. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...展开 Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. 收起 | |
| Crestakyd® 30-9055 | Scott Bader | Crestakyd® 30-9055 is a wood finishing alkyd used in nitrocellulose primers and top coats. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| Cyanine Blue GF15301 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GF15301 is a blue pigment that has a bright color and strong color strength. This pigment has low viscosity with good fluidity, and is recommended to be used in offset inks. | |
| Cyanine Blue GS15301 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GS15301 is a blue pigment that has strong color strength and low viscosity. This product has exceptional fastness properties with a heat resistance to temperatures up to 250°C and good migration and bleeding resistance. It is commonly used in...展开 Cyanine Blue GS15301 is a blue pigment that has strong color strength and low viscosity. This product has exceptional fastness properties with a heat resistance to temperatures up to 250°C and good migration and bleeding resistance. It is commonly used in solvent-based inks. 收起 | |
| Cyanine Blue GW15101 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GW15101 is a blue reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great liquidity, and it is recommended to be used in water-based inks. It has s...展开 Cyanine Blue GW15101 is a blue reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great liquidity, and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 35-45 ml/100g. 收起 | |
| Cyanine Green GF701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GF701 is a yellow or bluish shade pigment that has strong color strength with good fluidity. This pigment has excellent dispersability and a chemical nature of phthalocyanine. It is recommended to be used in offset inks and has a pH value of...展开 Cyanine Green GF701 is a yellow or bluish shade pigment that has strong color strength with good fluidity. This pigment has excellent dispersability and a chemical nature of phthalocyanine. It is recommended to be used in offset inks and has a pH value of 6.5-7.5 with an oil absorption rate of around 35-45 ml/100g. 收起 | |
| Cyanine Green GS701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GS701 is a green pigment that has strong color strength and good dispersibility. It has exceptional fastness properties with a heat resistance to temperatures up to 220°C and good migration and bleeding resistance. This product also provides...展开 Cyanine Green GS701 is a green pigment that has strong color strength and good dispersibility. It has exceptional fastness properties with a heat resistance to temperatures up to 220°C and good migration and bleeding resistance. This product also provides good physical properties with a density of 1.8 g/cm3 and a pH Value of 6.5-7.5. It is commonly used in solvent-based inks. 收起 | |
| Cyanine Green GW701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GW701 is a green reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great dispersibility, high color strength, and it is recommended to be used in ...展开 Cyanine Green GW701 is a green reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great dispersibility, high color strength, and it is recommended to be used in water-based inks. 收起 | |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...展开 Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. 收起 | |
| Dicyclohexylamine | Henan Harvest Chem Co., LTD. | Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insectic...展开 Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts etc. 收起 | |
| DPP Red GW25401 | Hangzhou Geecolor Chemical Co., Ltd | DPP Red GW25401 is a red, high performance pigment that has a medium opacity and is recommended for use in water-based inks. This pigment has outstanding fastness properties with exceptional resistance to ester, benzene, ketone, alcohol, alkali and acid. | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展开 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fast Orange GW1301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Orange GW1301 is an orange pigment that has a reddish shade and is semi-transparent. This pigment has a chemical nature of disazo and has good fastness to light and water. It is recommended for use in water-based inks and it has an oil absorption rat...展开 Fast Orange GW1301 is an orange pigment that has a reddish shade and is semi-transparent. This pigment has a chemical nature of disazo and has good fastness to light and water. It is recommended for use in water-based inks and it has an oil absorption rate of 30-40 ml/100g and a pH Value of 6.5-7.5. 收起 | |
| Fast Violet GS2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat re...展开 Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| Fast Violet GS2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone...展开 Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone and a heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| Fast Violet GW2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GW2301 is a high performance bluish violet pigment that has high color strength and it is recommended to be used in water-based inks. This pigment has excellent fastness properties with a heat resistance to temperatures up to 250°C. It also ha...展开 Fast Violet GW2301 is a high performance bluish violet pigment that has high color strength and it is recommended to be used in water-based inks. This pigment has excellent fastness properties with a heat resistance to temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and a pH Value of 6.0-7.0. 收起 | |
| Fast Violet GW2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GW2302 is a high performance reddish violet pigment that has high color strength and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and a pH value of 6.0-7.0. This pigment also h...展开 Fast Violet GW2302 is a high performance reddish violet pigment that has high color strength and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and a pH value of 6.0-7.0. This pigment also has excellent fastness properties with a heat resistance to temperatures up to 250°C. 收起 | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展开 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展开 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展开 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LCR-793 | Luohe Xingmao Titanium Industry Co., Ltd. | LCR-793 is a multi-purpose rutile titanium dioxide, which is produced by a chloride process. It provides excellent chalking resistance and can completely replace the imported high-grade titanium dioxide products. It is used in internal and external buildi...展开 LCR-793 is a multi-purpose rutile titanium dioxide, which is produced by a chloride process. It provides excellent chalking resistance and can completely replace the imported high-grade titanium dioxide products. It is used in internal and external building coatings, wood paint, industrial paint, powder coating, printing ink, high-grade paper, PE masterbatch, and plastic. 收起 | |
| LCR-813 | Luohe Xingmao Titanium Industry Co., Ltd. | ||
| Lithol Rubine GF57101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GF57101 is a red pigment that has a yellowish shade with high tinting strength. This product is recommended for use with offset inks, and can provide exceptional gloss and transparency. | |
| Lithol Rubine GF57102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GF57102 is an interphase red pigment with high tinting strength. It can provide excellent transparency and gloss, and also has excellent flow properties and strong storage stability. This product has a pH value between 7.0-8.0 and an oil abs...展开 Lithol Rubine GF57102 is an interphase red pigment with high tinting strength. It can provide excellent transparency and gloss, and also has excellent flow properties and strong storage stability. This product has a pH value between 7.0-8.0 and an oil absorption rate of around 45-55 ml/100g, and it is recommended for use in offset inks. 收起 | |
| Lithol Rubine GF57103 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GF57103 is a red pigment that has a bluish shade, and has exceptional flow with good storage stability. This pigment is recommended to be used in offset inks and it can provide high tinting strength along with high gloss, and good transparen...展开 Lithol Rubine GF57103 is a red pigment that has a bluish shade, and has exceptional flow with good storage stability. This pigment is recommended to be used in offset inks and it can provide high tinting strength along with high gloss, and good transparency. 收起 | |
| Lithol Rubine GS57101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GS57101 is a red pigment that has high luster, low viscosity and good resistance to solvents. This product has good fastness qualities such as resistance to alcohol, alkali, benzene, ester, ketone and acid. It is commonly used in solvent-bas...展开 Lithol Rubine GS57101 is a red pigment that has high luster, low viscosity and good resistance to solvents. This product has good fastness qualities such as resistance to alcohol, alkali, benzene, ester, ketone and acid. It is commonly used in solvent-based inks. 收起 | |
| Lithol Rubine GS57102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GS57102 is a yellowish red pigment that provides high luster, low viscosity, and it is designed to be used in solvent-based inks. This product has good fastness properties as it has resistance to alkali, acid, ester, ketone, benzene and alco...展开 Lithol Rubine GS57102 is a yellowish red pigment that provides high luster, low viscosity, and it is designed to be used in solvent-based inks. This product has good fastness properties as it has resistance to alkali, acid, ester, ketone, benzene and alcohol. 收起 | |
| Lithol Rubine GW57101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GW57101 is a red pigment that has a bluish shade and provides high gloss, high tinting strength, and good transparency. This product has an exceptional flow with good storage stability and it is recommended to be used in water-based inks. It...展开 Lithol Rubine GW57101 is a red pigment that has a bluish shade and provides high gloss, high tinting strength, and good transparency. This product has an exceptional flow with good storage stability and it is recommended to be used in water-based inks. It has strong physical properties with an oil absorption rate of 45-55 ml/100g and a density of 1.8 g/cm3. 收起 | |
| Lithol Rubine GW57102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Rubine GW57102 is a yellowish shade scarlet pigment that provides high gloss, high tinting strength, and good transparency. This product has exceptional flow with good storage stability and it is recommended to be used in water-based inks. It has s...展开 Lithol Rubine GW57102 is a yellowish shade scarlet pigment that provides high gloss, high tinting strength, and good transparency. This product has exceptional flow with good storage stability and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.8 g/cm3 and an oil absorption rate of 45-55 ml/100g. 收起 | |
| Lithol Scarlet Red GW49101 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Scarlet Red GW49101 is a red pigment that has strong color strength and excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has g...展开 Lithol Scarlet Red GW49101 is a red pigment that has strong color strength and excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has good fastness properties with a strong resistance to alkali, acid, ester, benzene, ketone and alcohol. 收起 | |
| Lithol Scarlet Red GW49102 | Hangzhou Geecolor Chemical Co., Ltd | Lithol Scarlet Red GW49102 is a red pigment that has excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has good fastness properties wi...展开 Lithol Scarlet Red GW49102 is a red pigment that has excellent physical properties including a density of 1.8 g/cm3 and an oil absorption rate of 40-50 ml/100g. This product is commonly used in water-based inks, and it also has good fastness properties with a strong resistance to alkali, acid, ester, benzene, ketone and alcohol. 收起 | |
| LR-788 | Luohe Xingmao Titanium Industry Co., Ltd. | LR-788 is a white powder that is non-toxic that is surface treated with silicone and aluminum. It has uniform particle size, excellent optical properties, weather-ability, and grinding dispersion. It is recommended for use in high-grade water-based and so...展开 LR-788 is a white powder that is non-toxic that is surface treated with silicone and aluminum. It has uniform particle size, excellent optical properties, weather-ability, and grinding dispersion. It is recommended for use in high-grade water-based and solvent-based coatings, inks, plastics, paper, decorative panels, and rubber. 收起 | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展开 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展开 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-40 (GFEAGF-1040) | Glassflake Ltd | Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展开 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 |
