| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Alu D1050 WHS | Metapol | Alu D1050 WHS, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative coatings, craft coatings, paints, architectural coatings, and textile coatings. This pr...展开 Alu D1050 WHS, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative coatings, craft coatings, paints, architectural coatings, and textile coatings. This product has been encapsulated with silicon dioxide, water-miscible solvents, and an emulsifier. Its average particle size ranges between 46-54 um. 收起 | |
| Alu D1054 | Metapol | Alu D1054, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in screen printing applications. This product's average particle size ranges between 52-58 um. | |
| Alu D1054 P | Metapol | Alu D1054 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's averag...展开 Alu D1054 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 50-58 um. 收起 | |
| Alu D1054 WH | Metapol | Alu D1054 WH, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in craft coatings, decorative coatings, textile coatings, and paints. This product has been stabilized...展开 Alu D1054 WH, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in craft coatings, decorative coatings, textile coatings, and paints. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle size ranges between 50-58 um. 收起 | |
| Alu D1070 | Metapol | Alu D1070, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in decorative coatings or industrial coatings. This product's average particle size ranges between 65-75 um. | |
| Alu D1070 P | Metapol | Alu D1070 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's averag...展开 Alu D1070 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 65-75 um. 收起 | |
| Alu D2034 | Metapol | Alu D2034, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and screen printing applications. This product's average particle size ranges between 31-37 um. | |
| Alu D2034 P | Metapol | Alu D2034 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average parti...展开 Alu D2034 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 31-37 um. 收起 | |
| Alu D2034 WH | Metapol | Alu D2034 WH, in the form of a particle-sized flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative and architectural coatings, school paints, craft coatings, and reflective coatings. This product's boiling...展开 Alu D2034 WH, in the form of a particle-sized flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative and architectural coatings, school paints, craft coatings, and reflective coatings. This product's boiling point ranges between 246.5-250 degrees Celsius. 收起 | |
| Alu D3023 | Metapol | Alu D3023, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 21-25 um. | |
| Alu D3027 P | Metapol | Alu D3027 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average partic...展开 Alu D3027 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 25-29 um. 收起 | |
| Alu D4016 | Metapol | Alu D4016, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 14-18 um. | |
| Alu F2033 | Metapol | Alu F2033, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 31-35 um. | |
| Alu F2033 P | Metapol | Alu F2033 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a powder mixture of aliphatic and aromatic solvents that can be used in decorative coatings and screen printing applications. This product's average partic...展开 Alu F2033 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a powder mixture of aliphatic and aromatic solvents that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 30-36 um. 收起 | |
| Alu F3022 | Metapol | Alu F3022, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and decorative paints. This product's average particle size ranges between 20-24 um. | |
| Alu F3022 L | Metapol | Alu F3022 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in decorative paints, aerosols, reflective paints and to establish chrome effects. This product's average...展开 Alu F3022 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in decorative paints, aerosols, reflective paints and to establish chrome effects. This product's average particle diameter ranges between 20-24 um. 收起 | |
| Alu F3022 WHS | Metapol | Alu F3022 WHS, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment for water-based systems that can be used in decorative coatings, craft coatings, architectural coatings, textile coatings, and paints. This product has been...展开 Alu F3022 WHS, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment for water-based systems that can be used in decorative coatings, craft coatings, architectural coatings, textile coatings, and paints. This product has been encapsulated with silicon dioxide, water-miscible solvents, and an emulsifier. Its average particle size ranges between 20-24 um. 收起 | |
| Alu F3024 | Metapol | Alu F3024, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and decorative paints. This product's average particle size ranges between 22-26 um. | |
| Alu F3028 | Metapol | Alu F3028, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 26-30 um. | |
| Alu F4007 P | Metapol | Alu F4007 P, in the form of a particle-sized irregular flake, is a leafing aluminum pigment powder that can be used in powder coatings, flexographic or gravure printing inks, decorative coatings, reflective paints, and aerosols, among other uses. This pr...展开 Alu F4007 P, in the form of a particle-sized irregular flake, is a leafing aluminum pigment powder that can be used in powder coatings, flexographic or gravure printing inks, decorative coatings, reflective paints, and aerosols, among other uses. This product's average particle size ranges between 6-9 um. 收起 | |
| Alu F4009 | Metapol | Alu F4009, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and can coatings. This product's average particle diameter ranges between 9-11 um. | |
| Alu F4009 P | Metapol | Alu F4009 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particl...展开 Alu F4009 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 10-12 um. 收起 | |
| Alu F4009IPA | Metapol | Alu F4009IPA, in the form of a mixture, is a non-leafing aluminum pigment in a paste alcohol base that can be used in offset printing applications. This product is partially soluble in water and its apparent density ranges between 0.80-1.0 kg/L. | |
| Alu F4010 L | Metapol | Alu F4010 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in aerosols, reflective paints, decorative paints, and to establish chrome effects. This product's averag...展开 Alu F4010 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in aerosols, reflective paints, decorative paints, and to establish chrome effects. This product's average particle diameter ranges between 8.5-11.5 um. 收起 | |
| Alu F4011 | Metapol | Alu F4011, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 9.5-12.5 um. | |
| Alu F4015 | Metapol | Alu F4015, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 14-18 um. | |
| Alu M1060 | Metapol | Alu M1060, in the form of a coarse particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in decorative paints. This product's average particle size ranges between 50-60 um. | |
| Alu M2033 | Metapol | Alu M2033, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 30-36 um. | |
| Alu M3029 | Metapol | Alu M3029, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 27-31 um. | |
| Alu M3029 P | Metapol | Alu M3029 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder. This product's average particle size ranges between 27-31 um. | |
| BA01-01 | Luohe Xingmao Titanium Industry Co., Ltd. | BA01-01 is an aluminum ferrous sulphate coating that is a white powder, nontoxic and tasteless, with a stable chemical property. It is characterized by excellent gloss, whiteness, and water dispersity. It is recommended for use in water-based and solvent-...展开 BA01-01 is an aluminum ferrous sulphate coating that is a white powder, nontoxic and tasteless, with a stable chemical property. It is characterized by excellent gloss, whiteness, and water dispersity. It is recommended for use in water-based and solvent-based coatings, which are used in interior or prime coat without high requirements for weather resistance, printing ink, paper making, plastics, masterbatch, rubber, and chemical fiber. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| CD 008 | Metapol | CD 008, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展开 CD 008, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 7.8-9.5 um. 收起 | |
| CD 010 | Metapol | CD 010, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展开 CD 010, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 9.8-12 um. 收起 | |
| CD 017 | Metapol | CD 017, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展开 CD 017, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 17-18 um. 收起 | |
| CD 025 | Metapol | CD 025, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This p...展开 CD 025, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 20-24 um. 收起 | |
| CD 1525 | Metapol | CD 1525, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective paints....展开 CD 1525, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective paints. This product's average particle size ranges between 20-24 um. 收起 | |
| CD 1525 WH | Metapol | CD 1525 WH, in the form of a particle-sized flake, is an aluminum pigment in a water based paste that can be used in craft coatings, decorative coatings, and textile printing applications. This product has been stabilized with additives, water-miscible s...展开 CD 1525 WH, in the form of a particle-sized flake, is an aluminum pigment in a water based paste that can be used in craft coatings, decorative coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solvents, and an emulsifier and is designed for neutral or slightly basic systems. Its average particle diameter ranges between 20-24 um. 收起 | |
| CD 1917 | Metapol | CD 1917, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective coating...展开 CD 1917, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective coatings. This product's average particle size ranges between 17-18 um. 收起 | |
| CD 1917 WH | Metapol | CD 1917 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in craft coatings, school coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solve...展开 CD 1917 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in craft coatings, school coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 17-18 um. This product is designed for neutral or slightly basic systems. 收起 | |
| CD 2410 | Metapol | CD 2410, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aromatic solvents, and aliphatic solvents that can be used in decorative coatings, reflective coatings, aerosols, roof coatings, and industrial coating...展开 CD 2410, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aromatic solvents, and aliphatic solvents that can be used in decorative coatings, reflective coatings, aerosols, roof coatings, and industrial coatings. This product's apparent density ranges between 1.18-1.3 kg/L. 收起 | |
| CD 2410 WH | Metapol | CD 2410 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks, flexographic printing inks, and decorative coatings. This product has been stabilized with additives, water-miscib...展开 CD 2410 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks, flexographic printing inks, and decorative coatings. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 9.8-12 um. This product is designed for neutral or slightly basic systems. 收起 | |
| CD 3008 | Metapol | CD 3008, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, and paper coatings. This product's a...展开 CD 3008, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, and paper coatings. This product's average particle size ranges between 7.8-9.5 um. 收起 | |
| CD 3008 WH | Metapol | CD 3008 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks and flexographic printing inks. This product has been stabilized with additives, water-miscible solvents, and an em...展开 CD 3008 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks and flexographic printing inks. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 7.8-9.5 um. 收起 | |
| Copper B 4555 | Metapol | Copper B 4555, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges betwe...展开 Copper B 4555, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 38-40 um and its apparent density is no more than 1.05 kg/L. 收起 | |
| Copper B 5565 | Metapol | Copper B 6565, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges be...展开 Copper B 6565, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 33-37 um and its apparent density is no more than 1.00 kg/L. 收起 | |
| Copper Hydropaste B 4555 | Metapol | Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in wa...展开 Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 38-40 um, and it contains between 83-87% metals. 收起 | |
| Copper Hydropaste R 7080 | Metapol | Copper Hydropaste R 7080, in the form of a particle-sized flake with hiding power, is a copper pigment in a water-based paste that can be used in paper coatings, decorative coatings, craft coatings, and textile coatings. This product is dispersible in wa...展开 Copper Hydropaste R 7080, in the form of a particle-sized flake with hiding power, is a copper pigment in a water-based paste that can be used in paper coatings, decorative coatings, craft coatings, and textile coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 18-22 um, and it contains between 83-87% metals. 收起 | |
| Copper Meta R 8090 | Metapol | Copper Meta R 8090, in the form of a particle-sized brilliant flake, is a copper pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic so...展开 Copper Meta R 8090, in the form of a particle-sized brilliant flake, is a copper pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 13-19 um, and it contains between 83-87% metals. 收起 | |
| Copper Meta U 2530 | Metapol | Copper Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a copper pigment in a paste solvent base that can be used in paper coatings, craft coatings, decorative coatings, and aerosols. This product is a mixture of al...展开 Copper Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a copper pigment in a paste solvent base that can be used in paper coatings, craft coatings, decorative coatings, and aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 50-53 um, and it contains between 83-87% metals. 收起 | |
| Copper R 7080 | Metapol | Copper R 7080, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges ...展开 Copper R 7080, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges between 20-24 um and its apparent density is no more than 0.95 kg/L. 收起 | |
| Copper R 8090 | Metapol | Copper R 8090, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges ...展开 Copper R 8090, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges between 13-19 um and its apparent density is no more than 0.75 kg/L. 收起 | |
| Copper U 2530 | Metapol | Copper U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. Its average particle diameter ranges between ...展开 Copper U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. Its average particle diameter ranges between 50-53 um and its apparent density is no more than 1.15 kg/L. 收起 | |
| Deep Gold 7600 | Metapol | Deep Gold 7600, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative lakes, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges ...展开 Deep Gold 7600, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative lakes, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 18-20 um, and its apparent density is no more than 0.90 kg/L. 收起 | |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...展开 Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. 收起 | |
| Dicyclohexylamine | Henan Harvest Chem Co., LTD. | Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insectic...展开 Dicyclohexylamine has a molecular weight of 181.32 and has a slight amine odor. This product is inflammable, highly toxic and slightly soluble in water. Dicyclohexylamine is an organic intermediate for the manufacture of dyes, pyroxyline varnish, insecticides, catalysts etc. 收起 | |
| Ducat R 7080 | Metapol | Ducat R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ran...展开 Ducat R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 20-25 um, and its apparent density is no more than 1.0 kg/L. 收起 | |
| Ducat U 2530 | Metapol | Ducat U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and aerosols. This product's average partic...展开 Ducat U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and aerosols. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L. 收起 | |
| English Green U 2530 | Metapol | English Green U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's averag...展开 English Green U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's average particle diameter ranges between 48-52 um, and its apparent density is no more than 1.15 kg/L. 收起 | |
| Fire Red U 2530 | Metapol | Fire Red U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-...展开 Fire Red U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Gap 2 EB | Metapol | Gap 2 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 20-24 um. | |
| Gap 2 NL | Metapol | Gap 2 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's averag...展开 Gap 2 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle diameter ranges between 20-24 um. 收起 | |
| Gap 3 NL | Metapol | Gap 3 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's averag...展开 Gap 3 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle diameter ranges between 17-18 um. 收起 | |
| Gap 4 EB | Metapol | Gap 4 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 9.8-12 um. | |
| Gap 4 NL | Metapol | Gap 4 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product...展开 Gap 4 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 9.8-12 um. 收起 | |
| Gap 495 | Metapol | Gap 495, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in flexographic printing inks and in powder coatings. This product's average particle diameter ranges between 9.8-12 um. | |
| Gap 8 EB | Metapol | Gap 8 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 7.8-9.5 um. | |
| Gap 8 NL | Metapol | Gap 8 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, flexographic printing inks, aerosols, and polychrome finishes. This ...展开 Gap 8 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, flexographic printing inks, aerosols, and polychrome finishes. This product's average particle diameter ranges between 7.8-9.5 um. 收起 | |
| Gap 880 | Metapol | Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges...展开 Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges between 7.8-9.5 um. 收起 | |
| Gap 895 | Metapol | Gap 895, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in powder coatings and inks. This product's average particle diameter ranges between 7.8-9.5 um. | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Karat Gold U 3045 | Metapol | Karat Gold U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's average p...展开 Karat Gold U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's average particle diameter ranges between 48-52 um, and its apparent density is no more than 0.95 kg/L. 收起 | |
| Lavender U 2530 | Metapol | Lavender U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, craft coatings, textile coatings, and screen printing applications. This product's average particle diameter ranges between 50-...展开 Lavender U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, craft coatings, textile coatings, and screen printing applications. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L. 收起 | |
| LCR-793 | Luohe Xingmao Titanium Industry Co., Ltd. | LCR-793 is a multi-purpose rutile titanium dioxide, which is produced by a chloride process. It provides excellent chalking resistance and can completely replace the imported high-grade titanium dioxide products. It is used in internal and external buildi...展开 LCR-793 is a multi-purpose rutile titanium dioxide, which is produced by a chloride process. It provides excellent chalking resistance and can completely replace the imported high-grade titanium dioxide products. It is used in internal and external building coatings, wood paint, industrial paint, powder coating, printing ink, high-grade paper, PE masterbatch, and plastic. 收起 | |
| LCR-813 | Luohe Xingmao Titanium Industry Co., Ltd. | ||
| LR-788 | Luohe Xingmao Titanium Industry Co., Ltd. | LR-788 is a white powder that is non-toxic that is surface treated with silicone and aluminum. It has uniform particle size, excellent optical properties, weather-ability, and grinding dispersion. It is recommended for use in high-grade water-based and so...展开 LR-788 is a white powder that is non-toxic that is surface treated with silicone and aluminum. It has uniform particle size, excellent optical properties, weather-ability, and grinding dispersion. It is recommended for use in high-grade water-based and solvent-based coatings, inks, plastics, paper, decorative panels, and rubber. 收起 | |
| Mandarin U 2530 | Metapol | Mandarin U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-...展开 Mandarin U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| N,N-dimethylformamide | Henan Harvest Chem Co., LTD. | N,N-dimethylformamide is a clear without suspension, inflammable liquid. This product is an organic solvent that is used in dye and paint applications. | |
| Old Gold R 7585 | Metapol | Old Gold R 7585, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ...展开 Old Gold R 7585, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 18-23 um, and its apparent density is no more than 0.96 kg/L. 收起 | |
| Old Gold U 2530 | Metapol | Old Gold U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and in aerosols. This product's average ...展开 Old Gold U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 52-56 um, and its apparent density is no more than 1.15 kg/L. 收起 | |
| Pale Gold B 4555 | Metapol | Pale Gold B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, aerosols, and screen printing applications. This product's average particle diameter ra...展开 Pale Gold B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 38-40 um and its apparent density is no more than 1.05 kg/L. 收起 | |
| Pale Gold Hydropaste R 8090 | Metapol | Pale Gold Hydropaste R 8090, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, paper coatings, and craft coatings. This product is dispersib...展开 Pale Gold Hydropaste R 8090, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, paper coatings, and craft coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 13-18 um, and it contains between 83-87% metals. 收起 | |
| Pale Gold I 41020 | Metapol | Pale Gold I 41020, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter r...展开 Pale Gold I 41020, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 9.5-10.5 and its apparent density is no more than 0.72 kg/L. 收起 | |
| Pale Gold I 4918 | Metapol | Pale Gold I 4918, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ra...展开 Pale Gold I 4918, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 8-9 um, and its apparent density is no more than 0.65 kg/L. 收起 | |
| Pale Gold Meta B 4555 | Metapol | Pale Gold Meta B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, craft coatings, and in aerosols. This product is a mixture...展开 Pale Gold Meta B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, craft coatings, and in aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 38-40 um, and it contains between 83-87% metals. 收起 | |
| Pale Gold Meta O 158 | Metapol | Pale Gold Meta O 158, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a paste oil base that can be used in offset printing inks. This product has been humidified in mineral oil. Its average particle...展开 Pale Gold Meta O 158, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a paste oil base that can be used in offset printing inks. This product has been humidified in mineral oil. Its average particle diameter ranges between 3.5-5.0 um, and it contains between 80-84% metals. 收起 |
