| BA01-01 | Luohe Xingmao Titanium Industry Co., Ltd. | BA01-01 is an aluminum ferrous sulphate coating that is a white powder, nontoxic and tasteless, with a stable chemical property. It is characterized by excellent gloss, whiteness, and water dispersity. It is recommended for use in water-based and solvent-...展开 BA01-01 is an aluminum ferrous sulphate coating that is a white powder, nontoxic and tasteless, with a stable chemical property. It is characterized by excellent gloss, whiteness, and water dispersity. It is recommended for use in water-based and solvent-based coatings, which are used in interior or prime coat without high requirements for weather resistance, printing ink, paper making, plastics, masterbatch, rubber, and chemical fiber. 收起 | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展开 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展开 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fast Blue B | Emperor Pigment Co., Ltd. | Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks,...展开 Fast Blue B is a pigment that is reddish in color. It has a color index number of Pigment Blue 15, a CAS number of 147-14-8, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks, aqueous inks, and paints. 收起 | |
| Fast Blue BGNCF | Emperor Pigment Co., Ltd. | Fast Blue BGNCF is a greenish colored pigment that is used in inks. It has a density value of 1.5 and a pH value of 7. This product has a color index number of Pigment Blue 15:4, a CAS number of 147-14-8, and an EU number of 205-685-1. | |
| Fast Blue BGS | Emperor Pigment Co., Ltd. | Fast Blue BGS is a pigment that is greenish in color. It has a color index number of Pigment Blue 15:3, a CAS number of 122390-87-1, and an EU number of 205-685-1. This product has a density value of 1.5, a pH value of 7, and is used in offset inks. | |
| Fast Blue BS | Emperor Pigment Co., Ltd. | Fast Blue BS is a reddish colored pigment that is used in paints and inks. It has a color index number of Pigment Blue 15:1, a CAS number of 12239-87-1, and an EU number of 205-685-1. This product has a density value of 1.5 and a pH value of 7. | |
| Fast Blue Lake | Emperor Pigment Co., Ltd. | Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number ...展开 Fast Blue Lake is a blue colored pigment that is used in offset inks, waterbased inks, solvent based inks, and Toluene based inks. It has a heat value of 100 degrees Celsius and an oil absorption value of 30 maximum. This product has a color index number of Pigment Blue 17, and a CAS number of 71799-04-7. 收起 | |
| Fast Blue Lake BO | Emperor Pigment Co., Ltd. | Fast Blue Lake BO is a blue colored pigment that is used in offset inks. It has a color index number of Pigment Blue 1, and a CAS number of 1325-87-7. This product has a heat value of 140 degrees Celsius and an oil absorption value of less than 45. | |
| Fast Blue Toner | Emperor Pigment Co., Ltd. | Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU num...展开 Fast Blue Toner is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a density value of 1.6 and a pH value of 7. This product has a color index number of Pigment Blue 1, a CAS number of 1325-410-7, and an EU number of 215-410-7. 收起 | |
| Fast Blue Toner R | Emperor Pigment Co., Ltd. | Fast Blue Toner R is a pigment that is blue in color. It has a color index number of Pigment Blue 10 and a CAS number of 71798-70-4. This product has a density value of 1.8, a pH value of 6, and is used in offset inks, solvent inks, and aqueous inks. | |
| Fast Milori Blue | Emperor Pigment Co., Ltd. | Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints...展开 Fast Milori Blue is a pigment that is blue in color. It has a color index number of Pigment Blue 27, and a CAS number of 14038-43-8. This product has a density value of 1.7 to 1.8, a pH value of 6.0 to 8.0, and is used in offset inks, solvent based paints, and waterbased paints. 收起 | |
| Fast Orange G | Emperor Pigment Co., Ltd. | Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent...展开 Fast Orange G is a pigment that is yellowish transparent in color. It has a color index number of Pigment Orange 13, a CAS number of 3520-72-7, and an EU number of 222-530-3. This product has a density value of 1.5, a pH value of 7, and is used in solvent inks. 收起 | |
| Fast Orange G-R | Emperor Pigment Co., Ltd. | Fast Orange G-R is an orange colored pigment that is used in surface printing inks. It has a color index number of Pigment Orange 13, and a heat resistance value of 160 degrees Celsius. | |
| Fast Orange GRN (Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange GRN (Semi-Tr) is a pigment that is orange in color. It has a color index number of Pigment Orange 16, a heat resistance value of 180 degrees Celsius, and is used in offset inks and waterbased inks. | |
| Fast Orange GRN-P(Tr)16 | Emperor Pigment Co., Ltd. | Fast Orange GRN-P(Tr)16 is an orange colored pigment that is used in surface printing inks and inner printing inks. It has a heat resistance value of 180 degrees Celsius and a color index number of Pigment Orange 16. | |
| Fast Orange OP-213(OP) | Emperor Pigment Co., Ltd. | Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and o...展开 Fast Orange OP-213(OP) is a pigment that is orange in color. It has a color index number of Pigment Orange 34, and a CAS number of 15793-73-4. This product has a density value of 1.40 to 1.45, a pH value of 6.0 to 8.0, and is used in waterbased inks and oil based ink. 收起 | |
| Fast Orange RL-TR | Emperor Pigment Co., Ltd. | Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks a...展开 Fast Orange RL-TR is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6.5, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Orange RL-T(Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent ink...展开 Fast Orange RL-T(Tr) is a pigment that is reddish in color. It has a color index number of Pigment Orange 34, a CAS number of 15793-72-4, and an EU number of 239-898-6. This product has a density value of 1.4, a pH value of 6,5, and is used in solvent inks, aqueous inks, and aqueous coatings. 收起 | |
| Fast Orange RL(Semi-Tr) | Emperor Pigment Co., Ltd. | Fast Orange RL(Semi-Tr) is an orange colored pigment that is used in waterbased inks. It has a color index number of Pigment Orange 34, a density value of 1.6, and a pH value of 6.0 to 7.0. | |
| Fast Orange RN | Emperor Pigment Co., Ltd. | Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH val...展开 Fast Orange RN is an orange colored pigment that is used in aqueous inks and air drying paints. It has a color index number of Pigment Orange 5, a CAS number of 3468-63-1, and an EU number of 222-429-4. This product has a density value of 1.4 and a pH value of 5.5. 收起 | |
| Fast Red BBC-S | Emperor Pigment Co., Ltd. | Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, ...展开 Fast Red BBC-S is a pigment that is bluish red in color. It has a color index number of Pigment Red 48:2, a CAS number of 7023-61-2, and an EU number of 230-303-5. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in NC inks, PA inks, and PP inks. 收起 | |
| Fast Red BBN | Emperor Pigment Co., Ltd. | Fast Red BBN is a yellowish red colored pigment that is used in offset inks. It has a density value of 1.8 and a pH value of 7.0 to 8.0. This product has a color index number of Pigment Red 48:1, a CAS number of 7585-41-3, and an EU number of 231-494-8. | |
| Fast Red BBN-W | Emperor Pigment Co., Ltd. | Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterb...展开 Fast Red BBN-W is a pigment that is yellowish red in color. It has a color index number of Pigment Red 48:1, a CAS number of 7858-41-3, and an EU number of 231-494-8. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks and in offset inks. 收起 | |
| Fast Red BBS-W | Emperor Pigment Co., Ltd. | Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks...展开 Fast Red BBS-W is a pigment that is red in color. It has a color index number of Pigment Red 48:3, a CAS number of 15782-05-5, and an EU number of 239-879-2. This product has a density value of 1.8, a pH value of 7.0 to 8.0, and is used in waterbased inks. 收起 | |
| Fast Red F2R | Emperor Pigment Co., Ltd. | Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a ...展开 Fast Red F2R is a yellowish red colored pigment that is used in waterbased inks and in textile printing. It has a color index number of Pigment Red 2, a CAS number of 6041-94-7, and an EU number of 227-930-1. This product has a density value of 1.5 and a pH value of 6.5 to 7.5. 收起 | |
| Fast Red F4R | Emperor Pigment Co., Ltd. | Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU num...展开 Fast Red F4R is a bluish red colored pigment that is used in textile printing and waterbased inks. It has a density value of 1.5 and a pH value of 6.5 to 7.5. This product has a color index number of Pigment Red 8, a CAS number of 6410-60-6, and an EU number of 229-100-4. 收起 | |
| Fast Red N | Emperor Pigment Co., Ltd. | Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased i...展开 Fast Red N is a pigment that is yellowish red in color. It has a color index number of Pigment Red 22, a CAS number of 6448-95-9, and an EU number of 229-245-3. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in waterbased inks. 收起 | |
| Fast Red Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and ...展开 Fast Red Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and coating. 收起 | |
| Fast Rose Lake | Emperor Pigment Co., Ltd. | Fast Rose Lake is a violet colored pigment that is used in aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. | |
| Fast Rose Toner | Emperor Pigment Co., Ltd. | Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-...展开 Fast Rose Toner is a violet colored pigment that is used in offset inks and aqueous inks. It has a density value of 1.7 and a pH value of 7. This product has a color index number of Pigment Violet 1, a CAS number of 1326-03-0, and an EU number of 215-413-3. 收起 | |
| Fast Rose Toner 6BMW | Emperor Pigment Co., Ltd. | Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and...展开 Fast Rose Toner 6BMW is a pigment that is violet in color. It has a color index number of Pigment Violet 2, a CAS number of 1326-04-1, and an EU number of 215-414-9. This product has a density value of 1.8, a pH value of 6, and is used in aqueous inks and aqueous coatings. 收起 | |
| Fast Violet 4R | Emperor Pigment Co., Ltd. | Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment pr...展开 Fast Violet 4R is a pigment that is violet in color. It has a color index number of Pigment Violet 19, and a CAS number of 1047-16-1. This product has a density value of 1.5, a pH value of 6.8, and is used in coloring printing inks, paints, and pigment printing. 收起 | |
| Fast Violet Lake | Emperor Pigment Co., Ltd. | Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 a...展开 Fast Violet Lake is a reddish colored pigment that is used in offset inks, aqueous inks, and solvent inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Violet Toner R | Emperor Pigment Co., Ltd. | Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value...展开 Fast Violet Toner R is a bluish colored pigment that is used in offset inks and aqueous inks. It has a color index number of Pigment Violet 3, a CAS number of 1325-82-2, and an EU number of 273-548-3. This product has a density value of 1.8 and a pH value of 6. 收起 | |
| Fast Yellow 10G | Emperor Pigment Co., Ltd. | Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigmen...展开 Fast Yellow 10G is a greenish yellow colored pigment that is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 3, a CAS number of 6486-23-2, and an EU number of 229-355-1. 收起 | |
| Fast Yellow G | Emperor Pigment Co., Ltd. | Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air dry...展开 Fast Yellow G is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 1, a CAS number of 2512-29-0, and an EU number of 219-730-8. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in air drying paints, offset inks, industrial paints, and in waterbased coatings. 收起 | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ A-1100S | Kolon | HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起 | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| HIKOTACK P-120HS | Kolon | HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起 | |
| HIKOTACK P-150 | Kolon | HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起 | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起 | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK(CIR) C-120 | Kolon | HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink. | |
| HIKOTACK(CIR) C-90 | Kolon | HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry. | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展开 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展开 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展开 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LCR-793 | Luohe Xingmao Titanium Industry Co., Ltd. | LCR-793 is a multi-purpose rutile titanium dioxide, which is produced by a chloride process. It provides excellent chalking resistance and can completely replace the imported high-grade titanium dioxide products. It is used in internal and external buildi...展开 LCR-793 is a multi-purpose rutile titanium dioxide, which is produced by a chloride process. It provides excellent chalking resistance and can completely replace the imported high-grade titanium dioxide products. It is used in internal and external building coatings, wood paint, industrial paint, powder coating, printing ink, high-grade paper, PE masterbatch, and plastic. 收起 | |
| LCR-813 | Luohe Xingmao Titanium Industry Co., Ltd. | ||
| LR-788 | Luohe Xingmao Titanium Industry Co., Ltd. | LR-788 is a white powder that is non-toxic that is surface treated with silicone and aluminum. It has uniform particle size, excellent optical properties, weather-ability, and grinding dispersion. It is recommended for use in high-grade water-based and so...展开 LR-788 is a white powder that is non-toxic that is surface treated with silicone and aluminum. It has uniform particle size, excellent optical properties, weather-ability, and grinding dispersion. It is recommended for use in high-grade water-based and solvent-based coatings, inks, plastics, paper, decorative panels, and rubber. 收起 | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展开 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展开 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 |
