| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展开 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展开 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Dynoadd® D-960 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...展开 Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® D-962 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...展开 Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® D-963 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...展开 Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® F-1 | Dynoadd by Dynea 太尔化工 | Dynoadd F-1是一种用于溶剂型涂料的一般用途的流动性、流平和抗缩孔添加剂。它可以降低涂料配方的表面张力，从而提高基材的润湿性，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-100 | Dynoadd by Dynea 太尔化工 | Dynoadd F-100是一种流动性和润湿添加剂，与溶剂型涂料的相容性高。它可以降低配方的表面张力，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-101 | Dynoadd by Dynea 太尔化工 | Dynoadd F-101是一种流平添加剂，适用于包括UV涂料在内的极性体系。它可以降低非溶剂型和溶剂型涂料的表面张力，从而提高基材的润湿性，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-102 | Dynoadd by Dynea 太尔化工 | Dynoadd F-102是一种流动性和流平添加剂，用于溶剂型体系时具有防泡沫的特性。由于其分子量和化学组成的关系，Dynoadd F-102在流动性和消泡沫性方面做到了良好的平衡，广泛用于各种配方。 | |
| Dynoadd® F-106 | Dynoadd by Dynea 太尔化工 | 透明涂料的防缩孔助剂，具有高DOI | |
| Dynoadd® F-113 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...展开 Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. 收起 | |
| Dynoadd® F-200 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....展开 Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. 收起 | |
| Dynoadd® F-201ND | Dynoadd by Dynea 太尔化工 | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...展开 Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. 收起 | |
| Dynoadd® F-300 | Dynoadd by Dynea 太尔化工 | Dynoadd F-300是一种可以与食品接触的流动性和润湿添加剂，适用于溶剂型涂料。它能够降低配方的表面张力，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-3B | Dynoadd by Dynea 太尔化工 | Dynoadd F-3B是一种可以与食品接触的流动性和抗缩孔添加剂，适用于溶剂型涂料。它能够降低配方的表面张力，提高基材的润湿性，避免缩孔、收缩和针孔等表面缺陷。 | |
| Dynoadd® F-404 | Dynoadd by Dynea 太尔化工 | Dynoadd F-404是一种硅氧烷改性流动性和流平添加剂，可以有效地控制溶剂型涂料的表面张力，用于喷涂涂料时具有出色的流动性、流平性和抗过喷缩孔的性能。 | |
| Dynoadd® F-409 | Dynoadd by Dynea 太尔化工 | 用于紫外固化体系的流平、流动和光泽助剂 | |
| Dynoadd® F-414 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...展开 Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. 收起 | |
| Dynoadd® F-461 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...展开 Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. 收起 | |
| Dynoadd® F-462 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-470 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-470可以减少滞留气泡、针孔和表面气泡。防止在生产和施工过程中产生气泡。特别适合较厚的涂层，比如地坪涂料、使用双组分环氧、不饱和聚脂和聚氨酯的铸膜体系。Dynoadd® F-470对透明度没有影响，推荐用于透明配方体系。Dynoadd® F-470还有低量的氟聚合物。 | |
| Dynoadd® F-601 | Dynoadd by Dynea 太尔化工 | Dynoadd F-601是一种用于水性配方的基材润湿和流平添加剂。添加Dynoadd F-601后可以提高基材的润湿性、流动性和流平性。避免或最大限度地减少缩孔、针孔、白点和其它表面缺陷。 | |
| Dynoadd® F-606 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...展开 Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. 收起 | |
| Dynoadd® F-608 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...展开 Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. 收起 | |
| Dynoadd® F-701B | Dynoadd by Dynea 太尔化工 | DYNOADD® F -701B是一种高效聚合物添加剂，对空气释放和抗气泡特别有效。它可控制溶剂型涂料的表面张力。少量添加即有助于提高流动性，减少表面缺陷，例如缩孔、桔皮和针孔。该产品与许多蜡乳液具有良好的相容性，用于高蜡含量涂料中具有良好的性能。DYNOADD® F -701B可以结合Dynoadd®流动添加剂，特别是Dynoadd ®F -101使用。 | |
| Dynoadd® F-705 | Dynoadd by Dynea 太尔化工 | Dynoadd F-705是一种高效的防泡沫非硅树脂聚合浓缩物，用于溶剂型和UV配方。能够有效防止泡沫的生成，且对脱气特别有效，因而可以防爆裂。对涂料外观没有消极影响。 | |
| Dynoadd® F-706 | Dynoadd by Dynea 太尔化工 | Dynoadd F-706是一种非硅树脂聚合型防泡沫和脱气添加剂。能够有效防止泡沫的生成，且对脱气特别有效，因而可以防爆裂。对涂料外观没有消极影响。 | |
| Dynoadd® F-707 | Dynoadd by Dynea 太尔化工 | Dynoadd F-707是一种用于溶剂型涂料的非硅树脂聚合型防泡沫添加剂。能够有效防止泡沫的生成，且对脱气特别有效，因而可以防爆裂。它可以控制溶剂型体系的表面张力。少量添加有助于提高流动性，减少缩孔和桔皮等表面缺陷。 | |
| Dynoadd® F-711 | Dynoadd by Dynea 太尔化工 | 消泡剂和脱气剂，适用于修补漆和一般工业漆 | |
| Dynoadd® F-713 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-713可以减少VOC为零或很低的配方体系中的滞留气泡、针孔和表面气泡。特别适合较厚的涂层，比如地坪涂料、使用双组分环氧、不饱和聚脂和聚氨酯的铸膜体系。Dynoadd® F-713可能减少涂膜的透明性。 | |
| Dynoadd® F-760 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...展开 Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. 收起 | |
| Dynoadd® F-800 | Dynoadd by Dynea 太尔化工 | DYNOADD® F -800是一种多官能团、附着力促进流动和流平剂。它改性涂料表面，大大改善对聚氨酯泡的吸附。作为一种有效的流动和流平添加剂，该产品可控制涂层表面张力，从而消除表面缺陷如橘皮、缩孔和针孔。DYNOADD® F -800对基材和颜料润湿上也有积极作用。 | |
| Dynoadd® F-802 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...展开 Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. 收起 | |
| Dynoadd® F-810 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...展开 Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. 收起 | |
| Dynoadd® P-506 | Dynoadd by Dynea 太尔化工 | Dynoadd P-506是一种单分散、球型颗粒添加剂，能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致，确保每一个颗粒都能发挥出良好的效果，与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为6微米。 | |
| Dynoadd® P-510 | Dynoadd by Dynea 太尔化工 | Dynoadd P-510是一种单分散、球型颗粒添加剂，能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致，确保每一个颗粒都能发挥出良好的效果，与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为10微米。 | |
| Dynoadd® P-515 | Dynoadd by Dynea 太尔化工 | Dynoadd P-515是一种单分散、球型颗粒添加剂，能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致，确保每一个颗粒都能发挥出良好的效果，与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为15微米。 | |
| Dynoadd® P-520 | Dynoadd by Dynea 太尔化工 | Dynoadd P-520是一种单分散、球型颗粒添加剂，能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致，确保每一个颗粒都能发挥出良好的效果，与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为20微米。 | |
| Dynoadd® P-530 | Dynoadd by Dynea 太尔化工 | Dynoadd P-530是一种单分散、球型颗粒添加剂，能够生成质地非常精细和均匀的膜。颗粒尺寸分布非常一致，确保每一个颗粒都能发挥出良好的效果，与同类产品相比的添加量比较少。能够提高抗刮擦性、持久改善滑爽度。颗粒尺寸为30微米。 | |
| Dynoadd® P-540 | Dynoadd by Dynea 太尔化工 | Dynoadd® P-540是一种单分散、球型颗粒添加剂，能够产生细而均匀的涂膜纹理。粒子具有极窄的粒度分布，以确保每一个颗粒都能发挥应有的效果，因而比其它竞争技术降低了添加量。它们可以改善抗刮擦性，并赋予永久的滑爽度。Dynoadd® P-540具有40微米的粒度。 所述颗粒可用于溶剂型、水性和光固化涂料配方中。典型的应用是卷材涂料、家用电器、化妆品包装、手机、汽车内饰、机械外壳、木器涂料以及光学涂层。 | |
| Dynoadd® R-1001 | Dynoadd by Dynea 太尔化工 | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...展开 Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. 收起 | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展开 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展开 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展开 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展开 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展开 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展开 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展开 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
