UL Prospector
Prospector

成功!

成功保存搜索结果
69 条结果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Alkylsulfonic Acid Ester of Phenol Plasticizer Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC.
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
HIFIFAST ORANGE HF2Y (Pigment Orange 64) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST ORANGE HF2Y(颜料橙64)是明亮的黄色调有机橙色颜料。它是行业标准的高性能橙色。出色的色强度,热稳定性和耐光性使其适用于包括食品接触和玩具等几乎所有的聚合物和应用。
HIFIFAST ORANGE HF3R (Pigment Orange 36) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST ORANGE HF3R (Pigment Orange 36) 是一种橙色颜料,在所有涂料系统中有良好全面的色牢性。它推荐用于OEM涂料,修补漆,水基汽车漆,装饰漆和多种类型的工业漆。
HIFIFAST RED HF1B (Pigment Red 214) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HF1B是有明亮黄色调红色的双偶氮压缩颜料。它推荐用于印刷油墨,塑料和涂料等。
HIFIFAST RED HF2B (Pigment Red 208) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HF2B is a benzimidazolone pigment with a yellowish red hue. It is recommended for solvent-based and water-based packaging inks, and is also suitable for other printing ink applications.
HIFIFAST RED HF2Y (Pigment Red 166) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HF2Y (Pigment Red 166)是一款黄色调红色颜料,在低浓度下也有良好的热稳定性。它具有出色的使用性能。
HIFIFAST RED HF4B-Y (Pigment Red 185) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HF4B-Y (Pigment Red 185)是一种蓝色调红色颜料,有良好的色牢度。它推荐用于PVC,PE膜和电缆应用。
HIFIFAST RED HF4Y-C (Pigment Red 242) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HF4Y-C (Pigment Red 242)是一种有出色的色牢度的强烈猩红色颜料。它适合用于多种聚合物中的纤维,薄膜,注塑成膜和挤出加工应用。
HIFIFAST RED HF5B-W (Pigment Red 176) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HF5B-W(Pigment Red 176)是一种高透明度的蓝色调红色颜料,有良好的色牢度。它有出色的介电性质。这款产品适合用于电缆剪切及纺丝染色应用中。
HIFIFAST RED HFBY-L (Pigment Red 144) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST RED HFBY-L (Pigment Red 144) 是一种多功能蓝色调红色颜料,有出色的色牢度和分散性。它推荐用于聚丙烯纤维,PVC汽车制造和电缆应用中。
HIFIFAST YELLOW HF2G-P (Pigment Yellow 155) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF2G-P是一种纯净的黄绿色颜料,具有高色彩强度,良好的遮盖力和流变性能。它主要用于黄色、橙色和绿色高品质工业涂料。
HIFIFAST YELLOW HF3G (Pigment Yellow 154) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF3G(Pigment Yellow 154)是一种中等黄色调颜料,有出色的耐光性和耐候性。由于具有出色的耐受性,它十分适用于各种浓度范围,包括浓度低至非常淡的色彩,并很适合作为着色颜料。它具有很好的流动性,也可以在不影响光泽度的前提下用于高浓度颜料。
HIFIFAST YELLOW HF3M (Pigment Yellow 194) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF3M是黄绿色调的苯并咪唑酮颜料。它推荐用于工业涂料、油墨和塑料等。
HIFIFAST YELLOW HF4G-LB (Pigment Yellow 151) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF4G-LB(Pigment Yellow 151)是一种绿色调黄色颜料,有出色的耐光性和耐候性,特别是深色调。它具有有机颜料中相对良好的不透明性。由于它在油漆中具有很好的流动性,它可以在高颜料浓度下使用,且不影响光泽度。应当注意的是对强碱的耐性并不令人满意。
HIFIFAST YELLOW HF4M (Pigment Yellow 185) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF4M是一种中等色调的黄色颜料,有出色的耐光性。它有高色彩强度,良好的透明度和出色的流变性,广泛用于油墨应用中。
HIFIFAST YELLOW HF4R-C (Pigment Yellow 139) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF4R-C (Pigment Yellow 139)是一种红色调黄色颜料,有出色的耐光性和耐候性,特别是在深色调中。作为有机颜料,它有出色的不透明性。它特别适用于为低铅油漆生产深色不透明无铅黄色。
HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180)是一种绿色调黄色颜料,有出色的色牢度。这款颜料已经成为高性能绿色调黄色的行业标准。它在多种聚合物中进行使用,还包括食品和玩具应用等
HIFIFAST YELLOW HF7G (Pigment Yellow 93) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF7G is a transparent green shade yellow pigment of exceptional color strength, purity and dispersibility. It is widely used in polyolefins and PVC for consumer goods.
HIFIFAST YELLOW HF8G (Pigment Yellow 128) Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 HIFIFAST YELLOW HF8G是一种黄绿色透明颜料,在中等色调中有良好的耐光性和耐候性。它被广泛用于普通工业和粉末涂料中。
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
Pigment Orange 62 Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 Pigment Orange 62 is a pigment with the C.I.# of 11775 and has a bright orange hue. It has applications in printing inks, coatings, and industrial coatings.
Pigment Yellow 192 Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 Pigment Yellow 192是微红的黄色调杂环颜料。它具有靓丽的红黄色,出色的耐光性和耐热性。它主要适用于聚酰胺应用中。
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
PVC Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展开 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起
Ramafast Blue AQ 141 Ramdev Chemical Industries Ramafast Blue AQ 141 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.35 to 0.55 gm/cc and a moisture content of < 1%.
Ramafast Blue GR 100 Ramdev Chemical Industries Ramafast Blue GR 100 is a blue odorless powder pigment used in the production of printing inks, paints, and coatings. This product has a bulk density of 0.25 to 0.45 gm/cc and a moisture content of < 0.5%.
Ramafast Blue NAP 777 Ramdev Chemical Industries Ramafast Blue NAP 777 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.32 gm/cc and a moisture content of < 1%.
Ramafast Blue NCF 707 Ramdev Chemical Industries Ramafast Blue NCF 707 is a blue odorless powder pigment used in the production of printing inks, paints, and coatings. This product has a bulk density of 0.45 to 0.65 gm/cc and a moisture content of < 1%.
Ramafast Blue NSL Ramdev Chemical Industries Ramafast Blue NSL is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.50 to 0.60 gm/cc and a moisture content of < 1%.
Ramafast Blue NSLD 250 Ramdev Chemical Industries Ramafast Blue NSLD 250 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.50 to 0.70 gm/cc and a moisture content of < 1%.
Ramafast Blue SBP 85 Ramdev Chemical Industries Ramafast Blue SBP 85 is a blue odorless powder pigment used in the production of printing inks, paints, and coatings. This product has a bulk density of 0.30 to 0.55 gm/cc and a moisture content of < 0.5%.
Ramafast Blue SP 004 Ramdev Chemical Industries Ramafast Blue SP 004 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.30 to 0.50 gm/cc and a moisture content of < 1%.
Ramafast Blue SX 251 Ramdev Chemical Industries Ramafast Blue SX 251 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.50 to 0.70 gm/cc and a moisture content of < 1%.
Ramafast Blue WP/L 143 Ramdev Chemical Industries Ramafast Blue WP/L 143 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.35 to 0.55 gm/cc and a moisture content of < 1%.
Ramafast Blue WP/L 328 Ramdev Chemical Industries Ramafast Blue WP/L 328 is a blue odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.35 to 0.55 gm/cc and a moisture content of < 1%.
Ramafast Green BL 58 Ramdev Chemical Industries Ramafast Green BL 58 is a green odorless powder pigment used in the production of printing inks, paints, and coatings. This product has a bulk density of 0.45 to 0.55 gm/cc and a moisture content of < 0.5%.
Ramafast Green D 100 Ramdev Chemical Industries Ramafast Green D 100 is a green odorless powder pigment used in the production of printing inks. This product has a bulk density of 0.55 to 0.65 gm/cc and a moisture content of < 0.5%.
Ramafast Green YL 51 Ramdev Chemical Industries Ramafast Green YL 51 is a green odorless powder pigment used in the production of printing inks, paints, and coatings. This product has a bulk density of 0.55 to 0.65 gm/cc and a moisture content of < 0.5%.
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展开 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展开 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展开 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展开 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展开 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展开 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展开 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展开 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展开 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展开 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展开 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展开 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展开 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.