| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...展开 Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. 收起 | |
| Hakuenka® O | Shiraishi-Omya GmbH | Hakuenka® O is a superior ultra-fine calcium carbonate coated with organic compound. Hakuenka® O has 30nm uniformed ultra-fine particles as the primary particle. These particles are surface treated with rosin acid in order to provide compatible surface mo...展开 Hakuenka® O is a superior ultra-fine calcium carbonate coated with organic compound. Hakuenka® O has 30nm uniformed ultra-fine particles as the primary particle. These particles are surface treated with rosin acid in order to provide compatible surface modification when it is mixed with organic materials or with a vehicle component. Hakuenka® O is mainly used for ink application as an extender pigment for better transparency and gloss. Hakuenka® O is also applied in the rubber industry. The rubber compounds with Hakuenka® O shows better tensile strength, tear strength and flex resistance. 收起 | |
| Hakuenka® T-DD | Shiraishi-Omya GmbH | Hakuenka® T-DD is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Haku...展开 Hakuenka® T-DD is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Hakuenka® T-DD is applied for both ink and paint applications. Hakuenka® T-DD is commonly applied to off-set printing ink and gravure ink for better transparency. 收起 | |
| Homocal-D | Shiraishi-Omya GmbH | Homocal-D is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with the vehicle or diluents. Homoc...展开 Homocal-D is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with the vehicle or diluents. Homocal-D is commonly applied to paint applications where high concentrate formulation is required. Homocal-D contributes to improve the brushing feature of the paint, it also contributes to create a glossy but smooth paint surface. Homocal-D , in the blend use with TiO2, contributes to improve water resistance, better antialkaline and anti-gasoline properties. 收起 | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展开 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Lemon Chrome | Unilex Colours & Chemicals Ltd. | Lemon Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties. It has a specific gravity of 5 and a pH of 5-7, and is suitable for dispersions, printing inks, protective coatings, and liquid inks. | |
| Middle Chrome | Unilex Colours & Chemicals Ltd. | Middle Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Prime Rose Chrome | Unilex Colours & Chemicals Ltd. | Prime Rose Chrome is a yellow chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 5 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Scarlet Chrome | Unilex Colours & Chemicals Ltd. | Scarlet Chrome is a red chrome pigment. This product has high color strength and highly soluble properties, and it has a specific gravity of 6 and a pH of 5-7. It is often used in printing inks, liquid ink, and protective coatings. | |
| Synthetic Black Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Black Oxide is a black inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 5-8. It is non-toxic and durable, and is suitable for inks, paints, and coatings. | |
| Synthetic Orange Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Orange Oxide is an orange inorganic pigment. This product has a specific gravity of 3.5-5.5 and a pH of 3-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Red Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Red Oxide is a red inorganic pigment. This product has a specific gravity of 4 and a pH of 5-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Synthetic Yellow Oxide | Unilex Colours & Chemicals Ltd. | Synthetic Yellow Oxide is a yellow inorganic pigment. This product has a specific gravity of 4 and a pH of 4-7. It is non-toxic and durable, and is suitable for paints, coatings, and inks. | |
| Unifast Blue 15:0 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:0 is a blue phthalocyanine pigment. This product has a specific gravity of 1.5 and a pH of 7. It is often used in the preparation of inks, paints, plastics, and others. | |
| Unifast Blue 15:3 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:3 is a blue phthalocyanine pigment. This product has a specific gravity of 1.6 and a pH of 7. It is often used in the preparation of inks, paints, plastics, and others. | |
| Unifast Blue 15:4 | Unilex Colours & Chemicals Ltd. | Unifast Blue 15:4 is a blue phthalocyanine pigment. This product has a specific gravity of 1.7 and a pH of 7. It is used in the preparation of paints, plastics, and solvent based inks. | |
| Unifast Green 7 | Unilex Colours & Chemicals Ltd. | Unifast Green 7 is a green phthalocyanine pigment. This product has a specific gravity of 1.6 and a pH of 7. It is used in the preparation of paints, plastics, and solvent based inks. | |
| Unifast Orange 13 | Unilex Colours & Chemicals Ltd. | Unifast Orange 13 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Orange 34 | Unilex Colours & Chemicals Ltd. | Unifast Orange 34 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 6.5. It is suitable for dispersions, inks, and paints. | |
| Unifast Orange 5 | Unilex Colours & Chemicals Ltd. | Unifast Orange 5 is an orange organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 6. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 112 | Unilex Colours & Chemicals Ltd. | Unifast Red 112 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.2 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 12 | Unilex Colours & Chemicals Ltd. | Unifast Red 12 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 146 | Unilex Colours & Chemicals Ltd. | Unifast Red 146 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 170 | Unilex Colours & Chemicals Ltd. | Unifast Red 170 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 2 | Unilex Colours & Chemicals Ltd. | Unifast Red 2 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.7 and a pH of 6.5. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 210 | Unilex Colours & Chemicals Ltd. | Unifast Red 210 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.6 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 3 | Unilex Colours & Chemicals Ltd. | Unifast Red 3 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.7 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 32 | Unilex Colours & Chemicals Ltd. | Unifast Red 32 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 4 | Unilex Colours & Chemicals Ltd. | Unifast Red 4 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 48:1 | Unilex Colours & Chemicals Ltd. | Unifast Red 48:1 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.9 and a pH of 7.5. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 53:1 | Unilex Colours & Chemicals Ltd. | Unifast Red 53:1 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.8 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Red 57:1 | Unilex Colours & Chemicals Ltd. | Unifast Red 57:1 is a red organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.7 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 1 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 1 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.6 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 12 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 12 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 13 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 13 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 14 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 14 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.3 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 168 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 168 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.7 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 17 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 17 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.4 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 183 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 183 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.3 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 191:1 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 191:1 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.6 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 3 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 3 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 74 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 74 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.5 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| Unifast Yellow 83 | Unilex Colours & Chemicals Ltd. | Unifast Yellow 83 is a yellow organic pigment that is non-toxic and has good purity, durability, and strength. This product has a specific gravity of 1.3 and a pH of 7. It is suitable for dispersions, inks, and paints. | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展开 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展开 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展开 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展开 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展开 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展开 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
