| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...展开 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加剂，可控制油墨中的水粘附性。可用于平版印刷油墨 | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. 三叶科技 | 憎水型添加剂，可控制平版印刷油墨中的水粘附性。由于它的高粘度，它对油墨几乎没有稀释效果 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommeneded for use in sheetfed ink. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 174 is recommended for use in sheetfed ink. | |
| CeraSPERSE 442DV (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 442DV is PTFE (dark colored polytetrafluoroethylene) and wax compounded in ink oil. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 25%氧化聚乙烯蜡乳液，分散于TRPGDA中，用于UV固化油墨和涂料。可提供滑爽度和过渡耐磨性能，并维持原有的光泽和透明度 | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 低分子量聚乙烯和聚四氟乙烯混合物。用于溶剂型和水性油墨 | |
| FluoroSLIP® 421 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 421 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 细粒径的高分子量聚乙烯和聚四氟乙烯混合物，可为配方提供出色的耐磨性和良好的滑爽度。用于胶印、UV和铁皮印刷油墨和套印清漆 | |
| FluoroSLIP® 515 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 515 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 533 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a hydrophilic polyethylene wax and PTFE blend where the polyethylene wax shows a uniform melting range peaking at 97°C. FluoroSLIP® 533 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 高分子量聚乙烯和聚四氟乙烯混合物，可提供较好的耐摩擦，耐磨和抗磨损性能，不提供滑爽度 | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 细微粉化，高熔点蜡合金粉末和聚四氟乙烯混合物。可增加润滑度、硬度、抗粘连性能和抗磨损以及耐磨性能。应用于溶剂型和水性油墨中 | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 稳定的50%微粉化聚四氟乙烯乳液，用于通用型平版印刷油墨体系。用于热固平版印刷油墨。可结合聚乙烯提高抗磨损性能 | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| FluoroSPERSE® 8233 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 8233 is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a soya alkyd vehicle. | |
| FluoroSPERSE® 966 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® 966 is a PTFE (polytetrafluoroethylene) dispersion in a petrolatum and soya alkyd drying oil. FluoroSPERSE® 966 is recommended for offset and heat set inks. | |
| FluoroSPERSE® UV 808 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | FluoroSPERSE® UV 808 is a 40% dispesion of PTFE (polytetrafluoroethylene) in TRPGDA monomer. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. 三叶科技 | 50%水性低分子量聚乙烯蜡乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%水性高分子量聚乙烯蜡乳液。可提供良好的耐摩擦性能和滑爽度 | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | 水性50%固体石蜡微粒分散乳液。用于水性油墨和涂料中，可提供良好的表面滑爽度和憎水性。 | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 阴离子，高密度聚乙烯乳液。可改善水性油墨、涂料和套印清漆的耐磨性能和滑爽度。也可大大改善抗划伤和耐胶印性能，以及滑动角结果 | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 石蜡的水性乳液。用于水性油墨和涂料中，具有出色的耐水性 | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 非离子型聚丙烯乳液。推荐作为水性油墨和涂料的防滑剂 | |
| Kamin® 2000C | KaMin Solutions | KaMin产品中白度最高的一种，颗粒最细，煅烧高岭粘土。它具有高吸油量和需水量。易添加入溶剂型和水性涂料和油墨中，其中它可提供光泽控制和最大的TiO2填充性、着色力和亮度（白度）。典型的应用：油墨和平光建筑漆 | |
| Kamin® 35 | KaMin Solutions | 通用型，中等白度，粗粒径填料，具有低油和水需求量。它主要用于胶粘剂、涂料、油墨或着重需要低基料含量的体系。它可为涂料和油墨提供不吸墨性、阻隔性，降低光泽并最小程度增加粘度。它适用于溶剂型、不含溶剂的和水性体系 | |
| Kamin® 35B | KaMin Solutions | 通用型，中等白度，粗粒径填料，具有低油和水需求量。它主要用于水性胶粘剂、涂料、油墨或着重考虑低表面积的体系。 | |
| Kamin® 70C | KaMin Solutions | KaMin 70C是一种高白度、中等粒径、煅烧高岭土，具有中等吸油量和需水量。KaMin 70C易添加入溶剂型和水性涂料中，它可为TiO2提供填充性、亮度（白度）、耐擦洗性和光泽控制。KaMin 70C是工业种广为应用的产品，典型的应用：平光和低光建筑涂料 | |
| Kamin® 80 | KaMin Solutions | 经济合算的通用型水洗高岭土，具有中等白度。适用于水性、溶剂型和无溶剂油墨 | |
| Kamin® 80 | KaMin Solutions | KaMin 80是一种经济合算的通用型水洗高岭土，具有中等白度。它适合水性、溶剂型和无溶剂油漆、油墨和胶粘剂应用 | |
| Kamin® 80B | KaMin Solutions | KaMin 80B是一种经济合算的通用型水洗高岭土，具有中等白度。它适合水性漆、油墨和胶粘剂应用 | |
| Kamin® 80B | KaMin Solutions | Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications. | |
| Kamin® 90 | KaMin Solutions | 细颗粒高岭粘土，用于溶剂型和水性油墨填充剂。碾磨成粉末状 | |
| Kamin® HG | KaMin Solutions | KaMin HG高岭土是一种经济合算的通用型水洗高岭土，具有细颗粒粒径和中等白度。适合水性漆、油墨和胶粘剂应用 | |
| Kamin® HG90 | KaMin Solutions | Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where hig...展开 Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. It has the physical form of spray dried beads or slurry. 收起 | |
| Lithosperse® 7005 CS | KaMin Solutions | 经处理的高岭粘土，应用于浆状油墨具有出色的流变性，作为杰出的印刷不起雾解决方案。该处理使碳氢体系不经碾磨即可快速分散，可控制稳定润版液的水粘附 | |
| Lithosperse® NextGen | KaMin Solutions | Lithosperse® NextGen是一款表面增强的粘土，用于快干油墨和张页式油墨。它设计用于替代油墨树脂和墨油，同时对油墨主要的性能如油墨光泽度和油墨浓度影响最小。其独特的性质使其在油墨配方中易于分散，并能在高油墨粘土负载的情况下从实质上最小化润版液的墨水渗迹。 | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1 N1是一种中等分子量的聚乙烯蜡。具有出色的滑爽性及良好的耐磨损性和耐指甲划伤性能。在配方中极其稳定，有助于防止消泡剂析出。 | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 氧化聚乙烯蜡。易分散于水性体系中，产生最少的泡沫。用于水性油墨 | |
| Polygloss® 90 | KaMin Solutions | Polygloss 90是一种超细粒径、高白度高岭土，可为水性和溶剂型涂料和油墨提供易分散性，增加光泽。Polygloss 90特制高岭土通过有效的TiO2填充可增加遮盖率。相比普通填充颜料，Polygloss 90可提供更高的临界颜料体积浓度（PVC)值，而不降低光泽，且最小程度地影响粘度 | |
| Polyplate® P | KaMin Solutions | Polyplate P是一种高白度、层状粘土，适用于乳胶漆、水性苯胺油墨、水性胶粘剂或需要增加的遮蔽率、着色力和保留能力的水性体系 | |
| Polyplate® P01 | KaMin Solutions | Polyplate P01是一种碾磨的高白度大粒径层状高岭土，适用于溶剂型和水性涂料、油墨和胶粘剂。大板状颗粒的高长径比可提供增加的着色力、漆保留能力和抗裂性 | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | 高级结晶PTFE，在干混阶段加入，随后挤出。可产生丝光桔皮纹理效果。 | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | 一种纯聚四氟乙烯，用作粉末涂料的质地改进剂。即便在低浓度的情况下，也可使涂料呈现一种持续的、均匀的和可重现的低光质地。 | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | 微粉化聚丙烯蜡合金，是一种消光剂，并可提供出色的耐磨、抗磨损性能，以及抗金属印记或指甲划伤的性能 | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 经济型可直接搅拌添加的蜡，可提供良好的滑爽度和耐摩擦性能。它是一种合成聚乙烯蜡，具有典型的直链分子结构。用于液体和浆状油墨中 | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | 一种微粉化聚乙烯蜡混合物。可以搅拌到涂料中，产生丝光或无光饰面的效果，并带有出色的滑爽性和耐磨性。可用作去光剂，提高抗磨光的性能。 | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-MG (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394-MG is a polyethylene wax with a DSC melt peak above 110°C. S-394-MG is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 聚乙烯蜡粉末，用于各种油墨和涂料，具有窄的熔融温度范围和低溶解度。可用于液体和浆状油墨 | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 聚乙烯蜡粉末，用于各种油墨和涂料，具有窄的熔融温度范围和低溶解度。可用于液体和浆状油墨 | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N2 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-395-N2 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 结晶聚乙烯，具有高熔点和出色的不溶性。用于溶剂型油墨和套印清漆 | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 结晶聚乙烯，具有高熔点和出色的不溶性。用于出版物凹印油墨和其它液体油墨 | |
| S-400-N1 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蜡粉末，适合薄膜应用场合。用于溶剂型油墨中 | |
| S-400-N5 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蜡粉末，适合薄膜应用场合。用于溶剂型油墨中 | |
| S-400-Q (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies, Inc. 三叶科技 | 酰胺蜡粉末，适合薄膜应用场合。用于溶剂型油墨中 | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. 三叶科技 | 高分子量球形聚乙烯蜡。用于溶剂型苯胺和凹印油墨 | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-25 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-25 is an isotactic polypropylene with a mean particle size of 25 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies, Inc. 三叶科技 | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | 微粉化PTFE粉末。用于印刷油墨 | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in offset and liquid inks. | |
| SST®-2P (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-2P is a low MW PTFE powder (off-white) with a particle size mean value of 8.0 µm. SST®-2P is recommended for use in offset and liquid inks. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | 微粉化PTFE粉末，具有合适的粒径和窄的分布，利于生产控制并增加性能。用于轮转式印刷、单张纸平版印刷和铁皮印刷油墨 | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommended for use in offset and liquid inks. | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is recommended for use in offset and liquid inks. | |
| SST®-3PS (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-3PS is a sintered low MW PTFE powder (charcoal gray colored) with a particle size mean value of 5.0 µm. SST®-3PS is recommended in offset and liquid inks. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | 高性能PTFE，具有很窄的粒径分布，易于分散。可用于液体和浆状油墨 | |
| SST®-4MG (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-4MG is recommended for use in offset inks. | |
| SST®-4P (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | SST®-4P is a low MW PTFE powder (white) with a particle size mean value of 3.0 µm. SST®-4P is recommended in offset and liquid inks. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies, Inc. 三叶科技 | 非常细的，纯PTFE粉末，具有出色的分散性。用于胶印单张纸和热固式油墨 | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies, Inc. 三叶科技 | TexMATTE 6005 is a cross-linked polymethyl methacrylate powder with a mean particle size of 7 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies, Inc. 三叶科技 | TexMATTE 6010 is a cross-linked polymethyl methacrylate powder with a mean particle size of 10 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies, Inc. 三叶科技 | TexMATTE 6014 is a cross-linked polymethyl methacrylate powder with a mean particle size of 13 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies, Inc. 三叶科技 | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in both liquid and offset inks. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies, Inc. 三叶科技 | TexMATTE 6030 is a cross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in both liquid and offset inks. |
