| Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| Kamin® 2000C | KaMin Solutions | KaMin产品中白度最高的一种，颗粒最细，煅烧高岭粘土。它具有高吸油量和需水量。易添加入溶剂型和水性涂料和油墨中，其中它可提供光泽控制和最大的TiO2填充性、着色力和亮度（白度）。典型的应用：油墨和平光建筑漆 | |
| Kamin® 35 | KaMin Solutions | 通用型，中等白度，粗粒径填料，具有低油和水需求量。它主要用于胶粘剂、涂料、油墨或着重需要低基料含量的体系。它可为涂料和油墨提供不吸墨性、阻隔性，降低光泽并最小程度增加粘度。它适用于溶剂型、不含溶剂的和水性体系 | |
| Kamin® 35B | KaMin Solutions | 通用型，中等白度，粗粒径填料，具有低油和水需求量。它主要用于水性胶粘剂、涂料、油墨或着重考虑低表面积的体系。 | |
| Kamin® 70C | KaMin Solutions | KaMin 70C是一种高白度、中等粒径、煅烧高岭土，具有中等吸油量和需水量。KaMin 70C易添加入溶剂型和水性涂料中，它可为TiO2提供填充性、亮度（白度）、耐擦洗性和光泽控制。KaMin 70C是工业种广为应用的产品，典型的应用：平光和低光建筑涂料 | |
| Kamin® 80 | KaMin Solutions | 经济合算的通用型水洗高岭土，具有中等白度。适用于水性、溶剂型和无溶剂油墨 | |
| Kamin® 80 | KaMin Solutions | KaMin 80是一种经济合算的通用型水洗高岭土，具有中等白度。它适合水性、溶剂型和无溶剂油漆、油墨和胶粘剂应用 | |
| Kamin® 80B | KaMin Solutions | KaMin 80B是一种经济合算的通用型水洗高岭土，具有中等白度。它适合水性漆、油墨和胶粘剂应用 | |
| Kamin® 80B | KaMin Solutions | Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications. | |
| Kamin® 90 | KaMin Solutions | 细颗粒高岭粘土，用于溶剂型和水性油墨填充剂。碾磨成粉末状 | |
| Kamin® HG | KaMin Solutions | KaMin HG高岭土是一种经济合算的通用型水洗高岭土，具有细颗粒粒径和中等白度。适合水性漆、油墨和胶粘剂应用 | |
| Kamin® HG90 | KaMin Solutions | Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where hig...展开 Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. It has the physical form of spray dried beads or slurry. 收起 | |
| Lithosperse® 7005 CS | KaMin Solutions | 经处理的高岭粘土，应用于浆状油墨具有出色的流变性，作为杰出的印刷不起雾解决方案。该处理使碳氢体系不经碾磨即可快速分散，可控制稳定润版液的水粘附 | |
| Lithosperse® NextGen | KaMin Solutions | Lithosperse® NextGen是一款表面增强的粘土，用于快干油墨和张页式油墨。它设计用于替代油墨树脂和墨油，同时对油墨主要的性能如油墨光泽度和油墨浓度影响最小。其独特的性质使其在油墨配方中易于分散，并能在高油墨粘土负载的情况下从实质上最小化润版液的墨水渗迹。 | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pigment Red 146 | Gaoyou Huabao Pigment Co., Ltd. | Pigment Red 146 is a blue-red shaded pigment that has a density of 1.4 g/cm3 and heat resistance of 180°C. This product is commonly used in inks, paints, and coatings. | |
| Pigment Yellow 83 | Gaoyou Huabao Pigment Co., Ltd. | Pigment Yellow 83 is a red-yellow shaded pigment that has a density of 1.5 g/cm3 and heat resistance of 250°C. This product is often used in paints and inks. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| Polygloss® 90 | KaMin Solutions | Polygloss 90是一种超细粒径、高白度高岭土，可为水性和溶剂型涂料和油墨提供易分散性，增加光泽。Polygloss 90特制高岭土通过有效的TiO2填充可增加遮盖率。相比普通填充颜料，Polygloss 90可提供更高的临界颜料体积浓度（PVC)值，而不降低光泽，且最小程度地影响粘度 | |
| Polyplate® P | KaMin Solutions | Polyplate P是一种高白度、层状粘土，适用于乳胶漆、水性苯胺油墨、水性胶粘剂或需要增加的遮蔽率、着色力和保留能力的水性体系 | |
| Polyplate® P01 | KaMin Solutions | Polyplate P01是一种碾磨的高白度大粒径层状高岭土，适用于溶剂型和水性涂料、油墨和胶粘剂。大板状颗粒的高长径比可提供增加的着色力、漆保留能力和抗裂性 | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| Superfast™ Orange GPP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Orange GPP is a yellow shaded orange pigment that is partially transparent and has high color strength. It has a density of 1.4-1.6 g/M2 and a heat resistance of 290-300°C. This product is commonly used to offer excellent heat stability in solv...展开 Superfast™ Orange GPP is a yellow shaded orange pigment that is partially transparent and has high color strength. It has a density of 1.4-1.6 g/M2 and a heat resistance of 290-300°C. This product is commonly used to offer excellent heat stability in solvent-based inks and industrial paints. 收起 | |
| Superfast™ Pink EP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Pink EP is a blue shaded pink pigment that is partially transparent and has high color strength. It has a density of 10-12 g/M2 and a heat resistance of 290-300°C. This product is commonly used in decorative paints, industrial paints, coil coat...展开 Superfast™ Pink EP is a blue shaded pink pigment that is partially transparent and has high color strength. It has a density of 10-12 g/M2 and a heat resistance of 290-300°C. This product is commonly used in decorative paints, industrial paints, coil coatings, powder coatings, and offset inks. 收起 | |
| Superfast™ Red HF4C | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Red HF4C is a yellow shaded red pigment that is partially transparent and has high color strength. It has a density of 1.4 g/M2 and heat resistance of 250°C. This product is commonly used in decorative paints, solvent-based inks and industrial ...展开 Superfast™ Red HF4C is a yellow shaded red pigment that is partially transparent and has high color strength. It has a density of 1.4 g/M2 and heat resistance of 250°C. This product is commonly used in decorative paints, solvent-based inks and industrial paints. 收起 | |
| Superfast™ Violet RL | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Violet RL is a brilliant and very strong violet pigment that has very high fastness levels. It has a density of 1.50 g/cm3 and heat resistance of 280-300°C. This product is used in decorative paints, industrial paints, coil coatings, powder coa...展开 Superfast™ Violet RL is a brilliant and very strong violet pigment that has very high fastness levels. It has a density of 1.50 g/cm3 and heat resistance of 280-300°C. This product is used in decorative paints, industrial paints, coil coatings, powder coatings, water-based inks, and offset inks. 收起 | |
| Superfast™ Yellow H4G | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Yellow H4G is a greenish yellow pigment that is partially transparent and has high light resistance. It has a density of 1.4-1.6 g/m2 and heat resistance of 250-280°C. This product is used to offer light resistance and exceptional dispersibilit...展开 Superfast™ Yellow H4G is a greenish yellow pigment that is partially transparent and has high light resistance. It has a density of 1.4-1.6 g/m2 and heat resistance of 250-280°C. This product is used to offer light resistance and exceptional dispersibility in solvent-based inks and paints, offset inks, and industrial paints. 收起 | |
| Superfast™ Yellow HGP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Yellow HGP is a greenish yellow pigment that is partially transparent and has high color strength. It has a density of 1.46 g/M2 and heat resistance of 260-280°C. This product is used in solvent-based industrial paints and inks, decorative pain...展开 Superfast™ Yellow HGP is a greenish yellow pigment that is partially transparent and has high color strength. It has a density of 1.46 g/M2 and heat resistance of 260-280°C. This product is used in solvent-based industrial paints and inks, decorative paints, and offset inks. 收起 | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. |
