UL Prospector

成功!

成功保存搜索结果
Kamin® 80 KaMin, LLC 经济合算的通用型水洗高岭土,具有中等白度。适用于水性、溶剂型和无溶剂油墨
Kamin® 80B KaMin, LLC Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications.
Kamin® 90 KaMin, LLC 细颗粒高岭粘土,用于溶剂型和水性油墨填充剂。碾磨成粉末状
Kamin® 90B KaMin, LLC Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.
Kamin® HG90 KaMin, LLC Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, Ti02 extension, and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where hi...展开 Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, Ti02 extension, and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. 收起
Kingmide 530 Sanho Chemical Co., Ltd. Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications.
Kingmide 549 Sanho Chemical Co., Ltd. Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications.
Kingmide 550 Sanho Chemical Co., Ltd. Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications.
Kingmide H-135GC Sanho Chemical Co., Ltd. Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...展开 Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. 收起
Lithosperse® 7005 CS KaMin, LLC 经处理的高岭粘土,应用于浆状油墨具有出色的流变性,作为杰出的印刷不起雾解决方案。该处理使碳氢体系不经碾磨即可快速分散,可控制稳定润版液的水粘附
Lithosperse® NextGen KaMin, LLC Lithosperse® NextGen是一款表面增强的粘土,用于快干油墨和张页式油墨。它设计用于替代油墨树脂和墨油,同时对油墨主要的性能如油墨光泽度和油墨浓度影响最小。其独特的性质使其在油墨配方中易于分散,并能在高油墨粘土负载的情况下从实质上最小化润版液的墨水渗迹。
Polygloss® 90 KaMin, LLC Polygloss 90是一种超细粒径、高白度高岭土,可为水性和溶剂型涂料和油墨提供易分散性,增加光泽。Polygloss 90特制高岭土通过有效的TiO2填充可增加遮盖率。相比普通填充颜料,Polygloss 90可提供更高的临界颜料体积浓度(PVC)值,而不降低光泽,且最小程度地影响粘度
Tohmide 393 Sanho Chemical Co., Ltd. Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications.
Tohmide 394-N Sanho Chemical Co., Ltd. Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications.
Tohmide 90 Sanho Chemical Co., Ltd. Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications.
Tohmide 92 Sanho Chemical Co., Ltd. Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications.
Tohmide TXC-245A Sanho Chemical Co., Ltd. Tohmide TXC-245A is a solid-type polyamide resin in a brown-colored pellet form. This product has a viscosity of 1000-2000 mPa.s and a softening point of 85-95°C. Tohmide TXC-245A is most commonly used in heat transfer ink formulation applications.