| 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide, in the form of a light yellow solid, is a photo-initiator. This product can be used in solvent-based printing inks, particularly lithographic and flexogravure printing inks, and in wood coatings. Its melti...展开 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide, in the form of a light yellow solid, is a photo-initiator. This product can be used in solvent-based printing inks, particularly lithographic and flexogravure printing inks, and in wood coatings. Its melting point lies between 91-94 degrees Celsius. 收起 | |
| Chromic Acid | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Chromic Acid, in the form of dark red flakes, is a raw material. This product can be used in printing applications. Its density is 2.7 g/cm3 and its assay is greater than or equal to 99.85%. | |
| Chromium Oxide | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Chromium Oxide, in the form of a green crystalline powder with a metallic luster, is a mineral. This product can be used as a colorant in paints, in sun-proof coatings, and in currency printing applications. Its density is 5.22 g/cm3 and its melting poi...展开 Chromium Oxide, in the form of a green crystalline powder with a metallic luster, is a mineral. This product can be used as a colorant in paints, in sun-proof coatings, and in currency printing applications. Its density is 5.22 g/cm3 and its melting point is 2435 degrees Celsius. 收起 | |
| Isostearyl Alcohol | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Isostearyl Alcohol, in the form of a clear yellow liquid, is a fatty alcohol. This product can be used in printing inks. Its density is 0.8124 g/cm3 and its cloud point lies below -15 degrees Celsius. | |
| Kamin® 2000C | KaMin Solutions | KaMin产品中白度最高的一种，颗粒最细，煅烧高岭粘土。它具有高吸油量和需水量。易添加入溶剂型和水性涂料和油墨中，其中它可提供光泽控制和最大的TiO2填充性、着色力和亮度（白度）。典型的应用：油墨和平光建筑漆 | |
| Kamin® 35 | KaMin Solutions | 通用型，中等白度，粗粒径填料，具有低油和水需求量。它主要用于胶粘剂、涂料、油墨或着重需要低基料含量的体系。它可为涂料和油墨提供不吸墨性、阻隔性，降低光泽并最小程度增加粘度。它适用于溶剂型、不含溶剂的和水性体系 | |
| Kamin® 35B | KaMin Solutions | 通用型，中等白度，粗粒径填料，具有低油和水需求量。它主要用于水性胶粘剂、涂料、油墨或着重考虑低表面积的体系。 | |
| Kamin® 70C | KaMin Solutions | KaMin 70C是一种高白度、中等粒径、煅烧高岭土，具有中等吸油量和需水量。KaMin 70C易添加入溶剂型和水性涂料中，它可为TiO2提供填充性、亮度（白度）、耐擦洗性和光泽控制。KaMin 70C是工业种广为应用的产品，典型的应用：平光和低光建筑涂料 | |
| Kamin® 80 | KaMin Solutions | 经济合算的通用型水洗高岭土，具有中等白度。适用于水性、溶剂型和无溶剂油墨 | |
| Kamin® 80 | KaMin Solutions | KaMin 80是一种经济合算的通用型水洗高岭土，具有中等白度。它适合水性、溶剂型和无溶剂油漆、油墨和胶粘剂应用 | |
| Kamin® 80B | KaMin Solutions | KaMin 80B是一种经济合算的通用型水洗高岭土，具有中等白度。它适合水性漆、油墨和胶粘剂应用 | |
| Kamin® 80B | KaMin Solutions | Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications. | |
| Kamin® 90 | KaMin Solutions | 细颗粒高岭粘土，用于溶剂型和水性油墨填充剂。碾磨成粉末状 | |
| Kamin® HG | KaMin Solutions | KaMin HG高岭土是一种经济合算的通用型水洗高岭土，具有细颗粒粒径和中等白度。适合水性漆、油墨和胶粘剂应用 | |
| Kamin® HG90 | KaMin Solutions | Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where hig...展开 Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. It is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. It has the physical form of spray dried beads or slurry. 收起 | |
| Lithosperse® 7005 CS | KaMin Solutions | 经处理的高岭粘土，应用于浆状油墨具有出色的流变性，作为杰出的印刷不起雾解决方案。该处理使碳氢体系不经碾磨即可快速分散，可控制稳定润版液的水粘附 | |
| Lithosperse® NextGen | KaMin Solutions | Lithosperse® NextGen是一款表面增强的粘土，用于快干油墨和张页式油墨。它设计用于替代油墨树脂和墨油，同时对油墨主要的性能如油墨光泽度和油墨浓度影响最小。其独特的性质使其在油墨配方中易于分散，并能在高油墨粘土负载的情况下从实质上最小化润版液的墨水渗迹。 | |
| Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide, in the form of a yellow powder, is a raw material. This product can be used in UV-curable varnish and paint systems, printing inks, and adhesives. Its density is 1.173 g/cm3 and its melting point lies be...展开 Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide, in the form of a yellow powder, is a raw material. This product can be used in UV-curable varnish and paint systems, printing inks, and adhesives. Its density is 1.173 g/cm3 and its melting point lies between 131-135 degrees Celsius. 收起 | |
| Polygloss® 90 | KaMin Solutions | Polygloss 90是一种超细粒径、高白度高岭土，可为水性和溶剂型涂料和油墨提供易分散性，增加光泽。Polygloss 90特制高岭土通过有效的TiO2填充可增加遮盖率。相比普通填充颜料，Polygloss 90可提供更高的临界颜料体积浓度（PVC)值，而不降低光泽，且最小程度地影响粘度 | |
| Polyplate® P | KaMin Solutions | Polyplate P是一种高白度、层状粘土，适用于乳胶漆、水性苯胺油墨、水性胶粘剂或需要增加的遮蔽率、着色力和保留能力的水性体系 | |
| Polyplate® P01 | KaMin Solutions | Polyplate P01是一种碾磨的高白度大粒径层状高岭土，适用于溶剂型和水性涂料、油墨和胶粘剂。大板状颗粒的高长径比可提供增加的着色力、漆保留能力和抗裂性 | |
| Trimethylolpropane Triacrylate | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Trimethylolpropane Triacrylate, in the form of a clear liquid, is an intermediate. This product can be used in UV-curable coatings, printing inks, and adhesives. Its density is 1.089 g/cm3 and its flash point is 165 degrees Celsius. | |
| Trimethylopropanetrimethacylate | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | Trimethylopropanetrimethacylate, in the form of a light yellow liquid, is a co-vulcanizing agent. This product can be used in UV-curable printing ink, coatings, and adhesives. Its density is 1.054 g/cm3 and its flash point is 181.418 degrees Celsius. |
