| AmviSense® S-DM-100 | AMVIGOR ORGANICS PVT LTD |
|
AmviSense® S-DM-100 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicon...展开
AmviSense® S-DM-100 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicones exert a protective effect on the skin by forming a barrier that hinders the penetration of irritants and allergens, also helps to decrease trans epidermal water loss (TEWL). 收起
Compliance Highlights Unavailable
|
Request Sample |
| AmviSense® S-DM-350 | AMVIGOR ORGANICS PVT LTD |
|
AmviSense® S-DM-350 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicon...展开
AmviSense® S-DM-350 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicones exert a protective effect on the skin by forming a barrier that hinders the penetration of irritants and allergens, also helps to decrease trans epidermal water loss (TEWL). 收起
Compliance Highlights Unavailable
|
Request Sample |
| BELSIL® DM 10 | DKSH |
|
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. BELSIL® DM 10 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. wa...展开
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. BELSIL® DM 10 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. 收起
Compliance Highlights Unavailable
|
Request Sample |
| BELSIL® eco DM 10 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 10 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 100 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 100 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 20 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 20 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 350 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 350 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 5 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun ca...展开
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun care. 收起
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 60.000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun ca...展开
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care. 收起
Compliance Highlights Unavailable
|
|
| BELSIL® OW 2100 DE | Wacker Chemie AG 瓦克化学 |
|
BELSIL® OW 2100 DE is a copolymer of polydimethylsiloxane and organic glycol. BELSIL® OW 2100 DE has good compatibility with a wide range of cosmetic ingredients, such as water and alcohol. It is stable in water systems.
Compliance Highlights Unavailable
|
|
| BELSIL® REG 1102 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. B...展开
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. BELSIL® REG 1102 can act as a thickener in formulations while delivering a smooth application. In addition it exhibits shear-thinning behavior. This attribute allows for formulation of cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation. 收起
Compliance Highlights Unavailable
|
|
| BELSIL® REG 1102 | DKSH |
|
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. B...展开
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. BELSIL® REG 1102 can act as a thickener in formulations while delivering a smooth application. In addition it exhibits shear-thinning behavior. This attribute allows for formulation of cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation. 收起
Compliance Highlights Unavailable
|
Request Sample |
| BRB 1739 | BRB International BV |
|
BRB 1739 is a clear solution of ultrahigh viscosity Dimethiconol fluid in a low viscosity dimethicone fluid. BRB 1739 is used in hand and body lotion, protective creams, colour cosmetics, shower gels, sun creams and lotions, moisturizing creams and lotion...展开
BRB 1739 is a clear solution of ultrahigh viscosity Dimethiconol fluid in a low viscosity dimethicone fluid. BRB 1739 is used in hand and body lotion, protective creams, colour cosmetics, shower gels, sun creams and lotions, moisturizing creams and lotions. 收起
Compliance Highlights Unavailable
|
|
| BRB DM 1,5 | BRB International BV |
|
BRB DM 1,5 is a 1,5 cSt straight chained low viscosity silicone fluid with a fast evaporation. The unique volatility and excellent spreading of BRB DM 1,5 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants...展开
BRB DM 1,5 is a 1,5 cSt straight chained low viscosity silicone fluid with a fast evaporation. The unique volatility and excellent spreading of BRB DM 1,5 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants & antiperspirants, Sun care, Hair Care and Color Cosmetics. Due to its low heat of vaporization BRB DM 1,5 does not cool the skin when it evaporates as other volatile carriers do. 收起
Compliance Highlights Unavailable
|
|
| BRB DM 2 | BRB International BV |
|
BRB DM 2 is a 2 cSt straight chained low viscosity silicone fluid. The unique volatility and excellent spreading of BRB DM 2 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants & antiperspirants, Sun care, ...展开
BRB DM 2 is a 2 cSt straight chained low viscosity silicone fluid. The unique volatility and excellent spreading of BRB DM 2 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants & antiperspirants, Sun care, Hair Care and Color Cosmetics. Due to its low heat of vaporization BRB DM 2 does not cool the skin when it evaporates as other volatile carriers do. 收起
Compliance Highlights Unavailable
|
|
| BRB DM 55 | BRB International BV |
|
BRB DM 55 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 55 can be used as a direct alternative to cyclopentasiloxane. BRB DM 55 is designed to be used in skin & body care, antiperspirant and deodorants...展开
BRB DM 55 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 55 can be used as a direct alternative to cyclopentasiloxane. BRB DM 55 is designed to be used in skin & body care, antiperspirant and deodorants, hair care, sun care and decorative cosmetics. 收起
Compliance Highlights Unavailable
|
|
| BRB DM 66 | BRB International BV |
|
BRB DM 66 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 66 can be used as a direct alternative to cyclopentasiloxane (and) cyclohexasiloxane. BRB DM 66 is designed to be used in skin & body care, antip...展开
BRB DM 66 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 66 can be used as a direct alternative to cyclopentasiloxane (and) cyclohexasiloxane. BRB DM 66 is designed to be used in skin & body care, antiperspirant and deodorants, hair care, sun care and decorative cosmetics. 收起
Compliance Highlights Unavailable
|
|
| BRB Gum 443 | BRB International BV |
|
BRB GUM 443 is a dimethylsiloxane gum. It has been especially designed to manufacture master-batches of pigments, process additives, reinforcing and diluting fillers, for silicone elastomers as well as plastics and organic elastomers or Personal Care Gum ...展开
BRB GUM 443 is a dimethylsiloxane gum. It has been especially designed to manufacture master-batches of pigments, process additives, reinforcing and diluting fillers, for silicone elastomers as well as plastics and organic elastomers or Personal Care Gum blends. 收起
Compliance Highlights Unavailable
|
|
| C33-7001D SunPURO® Dimethicone Treated Black Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Black Iron Oxide is self-heating and offers hydrophobicity, good dispersibility in oils and silicones, lubric...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Black Iron Oxide is self-heating and offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C33-8001D SunPURO® Dimethicone Treated Red Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Red Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear a...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Red Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C33-8073D SunCROMA® Dimethicone Treated Yellow Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, w...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C33-9001D SunPURO® Dimethicone Treated Yellow Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunPURO® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, we...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunPURO® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C33-A401D SunCROMA® Dimethicone Treated Black Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Black Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wea...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Black Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C33-A407D SunCROMA® Dimethicone Treated Yellow Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, we...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C33-A460D SunCROMA® Dimethicone Treated Red Iron Oxide Blend | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Red Iron Oxide Blend offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Red Iron Oxide Blend offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| C98-0001D SunCROMA® Dimethicone Treated Talc | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Talc offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water...展开
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Talc offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. 收起
Compliance Highlights Unavailable
|
Request Sample |
| Dimethicone BT-200-5CS | Batai (Guangzhou) Chemical Co., Ltd. 巴泰（广州）化工有限公司 |
|
Dimethicone BT-200-5CS is a low viscosity, low molecular weight organic silicone fluid used as an additive in various cosmetic formulas. It has a clear and transparent appearance, and it offers excellent compatibility and dispersion properties. Formulated...展开
Dimethicone BT-200-5CS is a low viscosity, low molecular weight organic silicone fluid used as an additive in various cosmetic formulas. It has a clear and transparent appearance, and it offers excellent compatibility and dispersion properties. Formulated cosmetic products have better spreadability, workability, and tactility without greasy feel. 收起
Compliance Highlights Unavailable
|
|
| Dimethisil® DM-12,500 | Innospec Performance Chemicals |
|
Dimethisil® DM-12,500 silicone fluid is a medium viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, and color cosmetics. Dimethisil® DM-12,500 provides excellent spreading and lub...展开
Dimethisil® DM-12,500 silicone fluid is a medium viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, and color cosmetics. Dimethisil® DM-12,500 provides excellent spreading and lubricity to personal care formulations. 收起
Compliance Highlights Unavailable
|
Request Sample |
| Dimethisil® DM-6 | Innospec Performance Chemicals |
|
Dimethisil® DM-6 silicone fluid is a low viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care, and color cosmetics. Dimethisil® DM-5 provides excellent spreading and v...展开
Dimethisil® DM-6 silicone fluid is a low viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care, and color cosmetics. Dimethisil® DM-5 provides excellent spreading and volatility to personal care formulations. 收起
Compliance Highlights Unavailable
|
Request Sample |
| DM-Fluid-A-6cs | Shin-Etsu Silicones 信越有机硅 |
|
DM-Fluid-A-6cs is a non-volatile silicone that has low viscosity and is easy to handle.
Compliance Highlights Unavailable
|
|
| DOWSIL™ 2-2078 Fluid | Dow Chemical - Home and Personal Care |
|
DOWSIL™ 2-2078 Fluid is a liquid amino phenyl silicone resin. It was developed to provide high gloss and substantivity in personal care applications, i.e. hair care, skin care and color cosmetics. It is suitable for water based and anhydrous formulations ...展开
DOWSIL™ 2-2078 Fluid is a liquid amino phenyl silicone resin. It was developed to provide high gloss and substantivity in personal care applications, i.e. hair care, skin care and color cosmetics. It is suitable for water based and anhydrous formulations and is stable in alkaline formulations. 收起
Compliance Highlights Available
|
Request Sample |
| DOWSIL™ 3901 Liquid Satin Blend | Dow Chemical - Home and Personal Care |
|
DOWSIL™ 3901 Liquid Satin Blend is a mixture of a high molecular weight polymer in dimethicone. With its novel, never-before-seen texture and distinctive sensory profile, this product enables formulations that not only deliver performance, but provide a d...展开
DOWSIL™ 3901 Liquid Satin Blend is a mixture of a high molecular weight polymer in dimethicone. With its novel, never-before-seen texture and distinctive sensory profile, this product enables formulations that not only deliver performance, but provide a distinctive experience and luxe satin-like feel. 收起
Compliance Highlights Unavailable
|
Request Sample |
| InnoSil 1883-DM | Innospec Performance Chemicals |
|
InnoSil 1883-DM is a cyclic free composition of polydimethylsiloxanes, and an ultra-high molecular weight dimethiconol fluid.
Compliance Highlights Unavailable
|
Request Sample |
| iSil™ 1218 | KimiKa, LLC (Formerly Cosphatech) |
|
iSil™ 1218 is a mixture of high viscosity dimethiconol grease and low viscosity dimethicone oil, used as a conditioner to provide a lubricous, clear skin feel like velvet.
Compliance Highlights Unavailable
|
|
| iSil 3063 | KimiKa, LLC (Formerly Cosphatech) |
|
iSil 3063 is a colorless translucent paste and iscomposed of Dimethicone and Dimethicone/Vinyl Dimethicone Crosspolymer. iSil 3063 can be used in skin care, hair care, make-up, suncare, antiperspirants and deodorants, etc. It is easy to formulate and can ...展开
iSil 3063 is a colorless translucent paste and iscomposed of Dimethicone and Dimethicone/Vinyl Dimethicone Crosspolymer. iSil 3063 can be used in skin care, hair care, make-up, suncare, antiperspirants and deodorants, etc. It is easy to formulate and can be applied in cold process, it can reduce tackiness of formulations and provide dry, smooth and silky skin feel. Also, it can thicken grease in formulation. 收起
Compliance Highlights Available
|
|
| KF-56A | Shin-Etsu Silicones 信越有机硅 |
|
KF-56A是无色，透明的液体，由二苯基甲硅烷氧基苯基聚三甲基硅氧烷组成。该产品具有很高的折射率和光泽。用于各种护发，护肤，彩妆以及防晒应用。产品为18kg罐装。
Compliance Highlights Available
|
|
| KF-8004 | Shin-Etsu Silicones 信越有机硅 |
|
KF-8004是无色至浅黄色，透明到些许浑浊的液体，由氨端聚二甲基硅氧烷组成。是用于头发清洗以及其它护发产品的调理剂。产品为18kg罐装。
Compliance Highlights Unavailable
|
|
| LexFilm™ Sun Natural MB | Inolex |
|
LexFilm™ Sun Natural MB is a 100% natural, multi-dimensional film-forming polymer for sun care applications. LexFilm™ Sun Natural MB is a optimized for sensory, SPF boosting, and water-resistance. LexFilm™ Sun Natural MB is pourable viscous fluid that is ...展开
LexFilm™ Sun Natural MB is a 100% natural, multi-dimensional film-forming polymer for sun care applications. LexFilm™ Sun Natural MB is a optimized for sensory, SPF boosting, and water-resistance. LexFilm™ Sun Natural MB is pourable viscous fluid that is compatible with organic and inorganic UV filters, providing an added benefit of inorganic UV filter dispersion. LexFilm™ Sun Natural MB is readily biodegrable, contains 100% biobased content as certified by the USDA BioPreferred® Program, is COSMOS approved, and is approved for use in NSF/ANSI 305 certified personal care products. 收起
Compliance Highlights Unavailable
|
Request Sample |
| LipFeel™ Natural MB | Inolex |
|
LipFeel™ Natural MB is a 100% natural and sustainable emollient, humectant, pigment dispersant and dye solubilizer used in lipstick, lip gloss and other in color cosmetics. It is colorless, odorless, tasteless and has performance properties similar to tho...展开
LipFeel™ Natural MB is a 100% natural and sustainable emollient, humectant, pigment dispersant and dye solubilizer used in lipstick, lip gloss and other in color cosmetics. It is colorless, odorless, tasteless and has performance properties similar to those of castor oil. LipFeel™ Natural MB is highly resistant to lipid oxidation and thus it forms lip products with extended shelf-life and without the strong odor and strong taste associated with oils. LipFeel™ Natural MB is suitable as an alternative to the typical natural and synthetic oils (e.g., vegetable oils, esters, polyisobutene) used on color cosmetics. It improves lip feel, as well as dramatically enhancing shine and texture in lip care products. It can be used in cosmetic pigment dispersions, lip and color cosmetics, balms and glosses, creams, lotions, ointments, bath and body care products, and all-natural lip products. LipFeel™ Natural MB is readily biodegrable, contains 100% biobased content as certified by the USDA BioPreferred® Program, is COSMOS approved, and is approved for use in NSF/ANSI 305 certified personal care products. 收起
Compliance Highlights Available
|
Request Sample |
| LX SERICITE DSM | LUXON Co., Ltd. |
|
LX SERICITE DSM is part of a series that consists of surface treated sericite with artificial or natural coating agents. It has excellent hydrophobicity, so it is widely used in W/O and W/S emulsion oil dispersion and powder products. It provides milk ski...展开
LX SERICITE DSM is part of a series that consists of surface treated sericite with artificial or natural coating agents. It has excellent hydrophobicity, so it is widely used in W/O and W/S emulsion oil dispersion and powder products. It provides milk skin feeling and excellent affinity to skin when applied in formulation. 收起
Compliance Highlights Available
|
Request Sample |
| METROARK 05 FLUID | DKSH |
|
METROARK 05 FLUID is a clear, colourless fluid of low viscosity, and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, alcohols, Esters and other solvents frequently utilised in personal-care formulations. Due to its ...展开
METROARK 05 FLUID is a clear, colourless fluid of low viscosity, and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, alcohols, Esters and other solvents frequently utilised in personal-care formulations. Due to its low heat of vaporisation, Metroark 05 Fluid evaporates from the skin without producing a cooling or stinging effect. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. 收起
Compliance Highlights Unavailable
|
Request Sample |
| Mfsorb® 622 | MFCI Co.,Ltd. 湖北美峰贸易有限公司 |
Mfsorb® 622 is mainly used for PE longevity film, but also used for polyurethane, and polyacetal, especially for nylon11 and nylon 12 polyester elastomers have a synergistic effect with UV absorber, and have excellent anti-oxidation effect, good compatibi...展开
Mfsorb® 622 is mainly used for PE longevity film, but also used for polyurethane, and polyacetal, especially for nylon11 and nylon 12 polyester elastomers have a synergistic effect with UV absorber, and have excellent anti-oxidation effect, good compatibility with resin, widely used in polyolefin food packaging materials. 收起
Compliance Highlights Available
|
||
| Mfsorb® 783 | MFCI Co.,Ltd. 湖北美峰贸易有限公司 |
Mfsorb® 783 is a high molecular weight hindered amine light stabilizer that exhibits excellent light and long-term thermal stability, low volatility and extraction resistance, and good compatibility with most polymers. This product is suitable for polyole...展开
Mfsorb® 783 is a high molecular weight hindered amine light stabilizer that exhibits excellent light and long-term thermal stability, low volatility and extraction resistance, and good compatibility with most polymers. This product is suitable for polyolefin materials, especially effective in PP fiber, tape, thin or thick LLDPE, and LDPE products. 收起
Compliance Highlights Available
|
||
| Mfsorb® 944 | MFCI Co.,Ltd. 湖北美峰贸易有限公司 |
Mfsorb® 944 is one kind of high molecular light stabilizer, with multiple functional groups. lt can be used in low-density PE film, PP tape, EVA film, ABS, PP fiber, PPE, polyacetals, polyamides, and polyurethanes. PVC, PVC blending material, polystyrene...展开
Mfsorb® 944 is one kind of high molecular light stabilizer, with multiple functional groups. lt can be used in low-density PE film, PP tape, EVA film, ABS, PP fiber, PPE, polyacetals, polyamides, and polyurethanes. PVC, PVC blending material, polystyrene, rubber, and viscose, it can work with UV adsorbent because of its special structure and large molecular weight (3000). 收起
Compliance Highlights Available
|
||
| Microcare® Silicone DM350 | THOR |
|
Microcare® Silicone DM350 is a linear polydimethylsiloxanesilicone fluid with a low viscosity and a low molecular weight. Microcare® Silicone DM350 is a siloxane with potential use in numerous personal care applications including skin care, hair care, col...展开
Microcare® Silicone DM350 is a linear polydimethylsiloxanesilicone fluid with a low viscosity and a low molecular weight. Microcare® Silicone DM350 is a siloxane with potential use in numerous personal care applications including skin care, hair care, colour cosmetics, sun care and antiperspirants/deodorants. 收起
Compliance Highlights Available
|
|
| MIRASIL™ D-DMB | Elkem Silicones |
|
MIRASIL™ D-DMB is a blend of a Dimethicone gum of very high viscosity at 15% in a low viscosity Dimethicone. Easy to handle blend of high molecular weight Dimethicone.
Compliance Highlights Available
|
|
| MIRASIL™ DM 10 | Elkem Silicones |
|
MIRASIL™ DM 10 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.
Compliance Highlights Available
|
|
| MIRASIL™ DM 100 | Elkem Silicones |
|
MIRASIL™ DM 100 is a linear polydimethylsiloxane fluid with a low viscosity and molecular weight. Suggested applications include skin care, deodorant and antiperspirant, make-up remover, shaving lotion and shaving foam as well as sun products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 1000 | Elkem Silicones |
|
MIRASIL™ DM 1000 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIR...展开
MIRASIL™ DM 1000 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIRASIL™ DM 1000 is ideal for use in skin care, deodorant and antiperspirant, make-up remover, shaving lotion and foam as well as sun products. 收起
Compliance Highlights Available
|
|
| MIRASIL™ DM 2 | Elkem Silicones |
|
MIRASIL™ DM 2 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.
Compliance Highlights Available
|
|
| MIRASIL™ DM 300 000 | Elkem Silicones |
|
MIRASIL™ DM 300 000 is a high molecular weight linear polydimethylsiloxane that is typically used as conditioning agents for skin and hair formulations. MIRASIL™ DM 300 000 is ideal for use in skin care, hair care and sun care products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 350 | Elkem Silicones |
|
MIRASIL™ DM 350 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIRA...展开
MIRASIL™ DM 350 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIRASIL™ DM 350 is ideal for use in skin care, deodorant and antiperspirant, make up remover, shaving lotion, shaving foam and sun products. 收起
Compliance Highlights Available
|
|
| MIRASIL™ DM 5 | Elkem Silicones |
|
MIRASIL™ DM 5 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.
Compliance Highlights Available
|
|
| MIRASIL™ DM 50 | Elkem Silicones |
|
MIRASIL™ DM 50 is a linear polydimethylsiloxane fluid with a low viscosity and molecular weight. Applications include skin care, deodorant and antiperspirants, make-up remover, shaving lotions, shaving foam and sun products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 500 | Elkem Silicones |
|
MIRASIL™ DM 500 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight. It is ideal for use in skin care, deodorants and antiperspirants, make up removers, and sun protections.
Compliance Highlights Available
|
|
| MIRASIL™ DM 500 000 | Elkem Silicones |
|
MIRASIL™ DM 500 000 is a high molecular weight linear polydimethylsiloxane that is typically used as conditioning agents for skin and hair formulations. MIRASIL™ DM 500 000 ideal for use in skin care, hair care and sun care products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 5000 | Elkem Silicones |
|
MIRASIL™ DM 5000 is a high molecular weight linear polydimethylsiloxane, typically used as conditioning agent for skin and hair formulations.
Compliance Highlights Available
|
|
| MIRASIL™ DM 60 000 | Elkem Silicones |
|
MIRASIL™ DM 60 000 is a high molecular weight linear polydimethylsiloxane. It is typically used as a conditioning agent for skin and hair formulations. MIRASIL™ DM 60 000 is ideal for use in skin care, hair care and sun care products.
Compliance Highlights Available
|
|
| PELEMOL® D-2000 | Phoenix Chemical, Inc. |
|
PELEMOL® D-2000 is an oligomeric ester formed by the reaction of PPG-26 and dimer acid, synthetic and vegetable derived. It can be described as a clear viscous, extremely substantive, hydrophobic, pourable liquid that is tasteless and virtually odorless. ...展开
PELEMOL® D-2000 is an oligomeric ester formed by the reaction of PPG-26 and dimer acid, synthetic and vegetable derived. It can be described as a clear viscous, extremely substantive, hydrophobic, pourable liquid that is tasteless and virtually odorless. PELEMOL® D-2000 can be applied in lipstick, make-up, and sunscreen products. 收起
Compliance Highlights Unavailable
|
|
| Polyderm PE-PA-ED | DKSH |
|
Polyderm PE-PA-ED from Alzo International is a water based polyurethane/polyether micro- emulsion, soft, durable and flexible water resistant film, fixative for hair and mascaras.
Compliance Highlights Unavailable
|
Request Sample |
| SA-C337001-10 | Miyoshi Europe |
|
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties,...展开
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties, especially in powders application. Highly recommended on pearls, it brings out their natural luster and shine, contrary to many other types of treatments that may dull their effects. 收起
Compliance Highlights Available
|
Request Sample |
| SA-C338001-10 | Miyoshi Europe |
|
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties,...展开
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties, especially in powders application. Highly recommended on pearls, it brings out their natural luster and shine, contrary to many other types of treatments that may dull their effects. 收起
Compliance Highlights Available
|
Request Sample |
| SA-C339001-10 | Miyoshi Europe |
|
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties,...展开
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties, especially in powders application. Highly recommended on pearls, it brings out their natural luster and shine, contrary to many other types of treatments that may dull their effects. 收起
Compliance Highlights Available
|
Request Sample |
| SILIKE 1000 | Maian |
|
SILIKE 1000 is a medium-viscosity product with excellent detangling power that improves compatibility, controls frizz, and provides softness and shine. A striking feature of SILIKE's is to promote a smooth and silky feel to the hair, especially SILIKE 949...展开
SILIKE 1000 is a medium-viscosity product with excellent detangling power that improves compatibility, controls frizz, and provides softness and shine. A striking feature of SILIKE's is to promote a smooth and silky feel to the hair, especially SILIKE 949 and SILIKE 650; together they can increase the product's spreadability and enhance the perception of silkiness, softness, and hair care, in addition to improving shine and combing and maintain hydration. 收起
Compliance Highlights Unavailable
|
|
| SILIKE 10.000 | Maian |
|
SILIKE 10.000 has lubricating properties that help reduce volume, reduce frizz, and maintain hydration. It provides a smooth sensation, improving gliding and hydration in products for the hair and skin. It improves wet combing and untangling of hair and p...展开
SILIKE 10.000 has lubricating properties that help reduce volume, reduce frizz, and maintain hydration. It provides a smooth sensation, improving gliding and hydration in products for the hair and skin. It improves wet combing and untangling of hair and provides stiffness. 收起
Compliance Highlights Unavailable
|
|
| SILIKE 350 | Maian |
|
SILIKE 350 is a medium viscosity fluid product with excellent de-tangling power. It improves compatibility, controls frizz, and provides softness, shine, and good spreadability. A striking feature of SILIKE's is to promote a smooth and silky feel to the h...展开
SILIKE 350 is a medium viscosity fluid product with excellent de-tangling power. It improves compatibility, controls frizz, and provides softness, shine, and good spreadability. A striking feature of SILIKE's is to promote a smooth and silky feel to the hair, especially SILIKE 949, SILIKE 350, and SILIKE 650; together they can increase the product's spreadability and accentuate the perception of silkiness, and smoothness of the hair, in addition to improving shine, compatibility and maintain hydration. 收起
Compliance Highlights Unavailable
|
|
| SILIKE 60.000 | Maian |
|
SILIKE 60.000 is an alternative to silicones, maintaining similar performance, physical-chemical characteristics, and sensorial. SILIKE 60.000 is a versatile product developed to innovate cosmetic products. It presents a soft, unique, and remarkable senso...展开
SILIKE 60.000 is an alternative to silicones, maintaining similar performance, physical-chemical characteristics, and sensorial. SILIKE 60.000 is a versatile product developed to innovate cosmetic products. It presents a soft, unique, and remarkable sensorial while promoting shine and spreadability. This product helps provide a good combing in dry and wet hair, moisturizing and improving sliding in the applications. It is suitable for use in body care products, creams, and make-up and skin care. 收起
Compliance Highlights Unavailable
|
|
| Silky Elastic Fluid BT-1166 | Batai (Guangzhou) Chemical Co., Ltd. 巴泰（广州）化工有限公司 |
|
Silky elastic fluid BT-1166 as mixture contains organosilicon polymer which in high molecular weight and PDMS.The appearance looks transparent and ropy.It shows strong wire-drawing effect and excellent lightly \ silky smooth \ moisture skin feeling;it is ...展开
Silky elastic fluid BT-1166 as mixture contains organosilicon polymer which in high molecular weight and PDMS.The appearance looks transparent and ropy.It shows strong wire-drawing effect and excellent lightly \ silky smooth \ moisture skin feeling;it is easy to spread on the skin surface.After using,it can form a complete uniform film that provides you silky feeling for long time.When apply to formula,it makes that soft silky and lightly feeling.It can be used in all oil system \ W\O \ W\Si system as wire-drawing provider.Of course,it also can be combined with drawing agent which used in water-based,make the O\W system acts stronger wire-drawing effect and long-lasting. 收起
Compliance Highlights Unavailable
|
|
| Soltex™ INO Polymer | Dow Chemical - Home and Personal Care |
|
Soltex™ INO Polymer is a SPF booster for Inorganic UV Filters/Particulate UV Filters. Soltex™ INO Polymer enhances the efficacy of inorganic particles (TiO2, ZnO, metal oxides) by improving their overall dispersion in a formulation resulting in a boost of...展开
Soltex™ INO Polymer is a SPF booster for Inorganic UV Filters/Particulate UV Filters. Soltex™ INO Polymer enhances the efficacy of inorganic particles (TiO2, ZnO, metal oxides) by improving their overall dispersion in a formulation resulting in a boost of SPF performance of sunscreens and a more even pigments distribution. It is ideal for use in sunscreens, cream and lotion formulations, and color cosmetics. 收起
Compliance Highlights Unavailable
|
Request Sample |
| Sunsafe® T201CD | Uniproma |
|
Sunsafe® T201CD is a UVB inorganic filter. It is a inorganic UV Filter with excellent transparency, smoothness, soft feeling compared to TiO2 when used in cosmetics. An inorganic UVB filters coated with Silica and Dimethicones. Specially developed for sy...展开
Sunsafe® T201CD is a UVB inorganic filter. It is a inorganic UV Filter with excellent transparency, smoothness, soft feeling compared to TiO2 when used in cosmetics. An inorganic UVB filters coated with Silica and Dimethicones. Specially developed for synergy with Sunsafe ABZ. High transparency and good sun protection effect. Good dispersibility. 收起
Compliance Highlights Available
|
|
| TEQFEEL 100 | Kale Care Chemicals |
|
TEQFEEL 100 is a 100% polydimethylsiloxane of viscosity 100 mm2/s. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low-viscosity di...展开
TEQFEEL 100 is a 100% polydimethylsiloxane of viscosity 100 mm2/s. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low-viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones. It gives excellent softness, shine, a soft-slippery-silky feeling, healing effect for shampoos. TEQFEEL 100 can be used for sunscreen, makeup, lotion, shampoo, hair spray and mousses. 收起
Compliance Highlights Available
|
|
| TEQFEEL 1000 | Kale Care Chemicals |
|
TEQFEEL 1000 is a 100% polydimethylsiloxane of viscosity 1000 mm2/s. It is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimet...展开
TEQFEEL 1000 is a 100% polydimethylsiloxane of viscosity 1000 mm2/s. It is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. TEQFEEL 1000 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. It gives excellent softness, shine,soft-slippery-silky feeling, healing effect for shampoos. TEQFEEL 1000 can be used for sunscreen, makeup, lotion, shampoo, hair spray and mousses. 收起
Compliance Highlights Available
|
|
| TEQFEEL 350 | Kale Care Chemicals |
|
TEQFEEL 350 is a 100% polydimethylsiloxane of viscosity 350 mm2/s. Low-viscosity linear Dimethicone with colorless transparent appearance with no odor. It can provide clear and non greasy feel, free of skin irritation. It’s mainly used in cosmetic and per...展开
TEQFEEL 350 is a 100% polydimethylsiloxane of viscosity 350 mm2/s. Low-viscosity linear Dimethicone with colorless transparent appearance with no odor. It can provide clear and non greasy feel, free of skin irritation. It’s mainly used in cosmetic and personal care products. The product differs from organic materials in its physical and chemical properties such as high and low temperature stability, good dielectric properties, low interfacial energy, and chemical inertness. TEQFEEL 350 can also be used in a widerange of applications ranging from heat transfer media and hydraulic fluids to polish and antifoam formulation. 收起
Compliance Highlights Available
|
|
| Vellaplex™ MB | Inolex |
|
Vellaplex™ MB is a multi-dimensional 100% natural polymer derived entirely from renewable and sustainable building blocks. Vellaplex™ MB creates a flexible natural barrier film that confers superior moisturization to the skin. It is ideal for use in a wid...展开
Vellaplex™ MB is a multi-dimensional 100% natural polymer derived entirely from renewable and sustainable building blocks. Vellaplex™ MB creates a flexible natural barrier film that confers superior moisturization to the skin. It is ideal for use in a wide range of cosmetic applications, including natural products, skin and face care, hair care, and color cosmetics. Vellaplex™ MB is readily biodegrable, contains 100% biobased content as certified by the USDA BioPreferred® Program, is COSMOS approved, and is approved for use in NSF/ANSI 305 certified personal care products. 收起
Compliance Highlights Available
|
Request Sample |
| WACKER® AK 0.65 | DKSH |
|
WACKER® AK 0.65 is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, BELSIL® ...展开
WACKER® AK 0.65 is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, BELSIL® AK 0.65 evaporates from the skin without producing a cooling or stinging effect. BELSIL® AK 0.65 evaporates rapidly and without residues. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. 收起
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® AK 20 | DKSH |
|
WACKER® AK 20 is approx. 20 mm²/s. Due to its chemical structure, WACKER® AK 20 has an outstanding property profile, which sets it apart from organic materials such as mineral oils. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philip...展开
WACKER® AK 20 is approx. 20 mm²/s. Due to its chemical structure, WACKER® AK 20 has an outstanding property profile, which sets it apart from organic materials such as mineral oils. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. 收起
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® E 1656 | DKSH |
|
WACKER® E 1656 is an oil-in-water emulsion of an aminofunctional polydimethylsiloxane. WACKER® E 1656 is stabilized by nonionic emulsifiers. Therefore, combination of WACKER® E 1656 with other emulsions is facilitated in many cases. Available in Sri Lanka...展开
WACKER® E 1656 is an oil-in-water emulsion of an aminofunctional polydimethylsiloxane. WACKER® E 1656 is stabilized by nonionic emulsifiers. Therefore, combination of WACKER® E 1656 with other emulsions is facilitated in many cases. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. 收起
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® E3154 | DKSH |
|
WACKER® E3154 is a nonionic oil-in-water-emulsion of a medium viscosity polydimethylsiloxane dispersed in water. Even in diluted form, the emulsion is well stable with regard to shear stress. In addition, it exhibits excellent wetting and spreading proper...展开
WACKER® E3154 is a nonionic oil-in-water-emulsion of a medium viscosity polydimethylsiloxane dispersed in water. Even in diluted form, the emulsion is well stable with regard to shear stress. In addition, it exhibits excellent wetting and spreading properties. WACKER® E 3154 can easily be incorporated into coldstirred formulations. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. 收起
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® FC 201 | DKSH |
|
WACKER® FC 201 is a nonionic 60% Polysiloxan emulsion for fabric softeners. WACKER® FC 201 is a one-component system which is cross-linking at higher temperatures. Therefore WACKER® FC 201 protects textiles, especially cotton-polyester union cloth, for wr...展开
WACKER® FC 201 is a nonionic 60% Polysiloxan emulsion for fabric softeners. WACKER® FC 201 is a one-component system which is cross-linking at higher temperatures. Therefore WACKER® FC 201 protects textiles, especially cotton-polyester union cloth, for wrinkles and improves handle and easy ironing properties. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. 收起
Compliance Highlights Unavailable
|
Request Sample |
| X-21-5849 | Shin-Etsu Silicones 信越有机硅 |
|
X-21-5849 是一种无色至浅黄色、透明至轻微雾状液体，由聚二甲基硅氧烷醇组成。在洗去型和非洗去型产品中使用具有长效成膜作用。适合用于彩妆、护发和护肤产品中。有18kg和180kg两种包装规格可供选择。
Compliance Highlights Unavailable
|
|
| XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt | Dow Chemical - Home and Personal Care |
|
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is a colorless, clear polydimethylsiloxane fluid. It imparts soft, velvety skin feel, and spreads easily on both skin and hair.
Compliance Highlights Unavailable
|
Request Sample |
