| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...展开 PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. 收起 | |
| Chlorinated PVC-YURON CPVC | Yuron New Material | 水相法低黏度过氯乙烯树脂是使用国际领先的水相悬浮法工艺， 把PVC树脂经氯气深度氯化所制成。在甲苯、二甲苯等多种芳烃、酮类溶剂中有良好的溶解性。这款产品有优异的耐酸，耐碱，耐候，耐水，耐油，耐寒， 阻燃性。可以与醇酸树脂、丙烯酸树脂、氯化橡胶树脂、高氯化聚乙烯树脂等多种树脂相溶。 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展开 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Triamino-Functional Trimethoxysilane | Dalian Onichem Co., Ltd. | Triamino-Functional Trimethoxysilane is a general purpose bonding additive especially suited for PVC plastisols. | Request Sample |
| Organosilane 2A301 | Dalian Onichem Co., Ltd. | Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This p...展开 Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This product is suitable for use with acrylic, isocyanate, polyurethane, ABS, PVC, and styrene polymers. 收起 | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...展开 DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起 | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展开 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展开 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| SILQUEST A-174* SILANE | Momentive Performance Materials | Employed in adhesive and sealant systems cured via a free radical mechanism, such as polyesters, polyurethanes, acrylics and many thermoplastics such as PVC, polyolefins and polyurethanes. | |
| DIBUTYL PHTHALATE (DBP) | Aekyung Petrochemical Co., Ltd. | DIBUTYL PHTHALATE (DBP) is a common plasticizer for PVC. This product is highly compatible with other resins. It is used in construction materials, paint, adhesives, and lubricants. | |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC...展开 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC...展开 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| 3-Methacryloxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Nippolan 3114 | Tosoh Corporation | Nippolan 3114 is a two-component polyurethane adhesive in methyl ethyl ketone and toluene solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC...展开 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
| Vylon 220 | DKSH | Vylon 220 is a high molecular weight copolyester with medium Tg. It has an excellent adhesion with metal, PET and PVC. Vylon 220 has very good compatibility with other polyester. | Request Sample |
| Nippolan 3110 | Tosoh Corporation | Nippolan 3110 is a one-component polyurethane adhesive in toluene, acetone, and methyl ethyl ketone solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| 3-Methacryloxypropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| Solvent Green 28 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Green 28 is used in coloring for transparent and opaque dyeing of PS, SAN, PMMA, PC, rigid PVC, CA, CAB and opaque dyeing of SB, ABS and ABS/PC blends. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| Vylon 270 | DKSH | Vylon 270 is a high molecular weight copolyester with high Tg (67°C). It has excellent adhesion on PET, metal, and PVC, very good compatibility with another polyester, and excellent formability | Request Sample |
| Nichigo-Polyester SP170 | Nippon Gohsei | Nichigo-Polyester SP170 is a high molecular weight saturated polyester resin featuring a low melting point. This product is well suited for use in hot melt adhesive and PVC backing applications. | |
| Viscolite-OS | Shiraishi-Omya GmbH | Viscolite-OS was designed in order to improve rheological property for both construction sealants and PVC sol for automobiles. It has 80nm ultra-fine particles, similar to Hakuenka CCR. Viscolite-OS is specially recommended for Modified silicone sealant, ...展开 Viscolite-OS was designed in order to improve rheological property for both construction sealants and PVC sol for automobiles. It has 80nm ultra-fine particles, similar to Hakuenka CCR. Viscolite-OS is specially recommended for Modified silicone sealant, PVC sol & Acrylic sol where they require easy dispersion and excellent thixotropic property in paste sol. Viscolite-OS can be applied as substitute for fumed silica because easy dispersion and excellent thixotropic property in paste sol are the nature of fumed silica. 收起 | |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展开 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| VISIOMER® TRGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins. | |
| Polurene IAX 3719 | S.A.P.I.C.I. SpA | Polurene IAX 3719 is an MDI-based polyurethane resin. This product has strong initial bond. It can be used as a 1K adhesive in PVC systems, expanded polyurethane, and natural or synthetic fabrics. | |
| Nichigo-Polyester SP185 | Nippon Gohsei | Nichigo-Polyester SP185 is a high molecular weight saturated polyester resin featuring microcrystalline solvent solubility. This product is well suited for use in hot melt adhesives, laminates, polyester adhesives, and PVC backing applications. | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| VISIOMER® TMPTMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers. | |
| Solvent Orange 60 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Orange 60 is used in coloring for polystyrene, PS, HIPS, ABS, PC, RPVC, PMMA, SAN, AS, PET, resin, polymethylmethacrylate, unplasticized pvc and other plastics, also used in coloring of estron, caprone and terylene etc. | |
| Vylon 103 | DKSH | Vylon 103 is a high molecular weight copolyester with medium Tg. Vylon 103 has very good adhesion properties on PVC, PET, and other plastics. Vylon 103 is compliant with FDA 175.105 and EC 10/2011. | Request Sample |
| Nichigo-Polyester NP-101S50EO | Nippon Gohsei | Nichigo-Polyester NP-101S50EO is a high molecular weight saturated polyester resin featuring excellent holding power. This product is well suited for use in adhesive films and labels, laminates, polyester adhesives, and PVC backing applications. | |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC...展开 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| Defomex 2033N | DKSH | Defomex 2033N has been developed to prevent and reduce foam formation during both the production and the application of waterborne paints, plastic coatings and emulsion adhesives. Defomex 2033N is compatible with all the most widespread latex used for paints and construction formulations. Defomex 2033N is suitable for paints with a broad range of PVC; specifically with a PVC...展开 Defomex 2033N has been developed to prevent and reduce foam formation during both the production and the application of waterborne paints, plastic coatings and emulsion adhesives. Defomex 2033N is compatible with all the most widespread latex used for paints and construction formulations. Defomex 2033N is suitable for paints with a broad range of PVC; specifically with a PVC from 35 to 85. Defomex 2033N could be added inside the system during all the production cycle. The best performance is achieved adding half of the product during pigment dispersion; the remaining during let down. 收起 | Request Sample |
| Nichigo-Polyester SNT | Nippon Gohsei | Nichigo-Polyester SNT is a high molecular weight saturated polyester resin featuring high durability and adhesion properties. This product is well suited for use in adhesive films and labels, laminates, polyester adhesives, and PVC backing applications. | |
| Nichigo-Polyester LP035 | Nippon Gohsei | Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applicatio...展开 Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applications. 收起 | |
| NOURYBOND® 289 Adhesion Promoter | Evonik Operations GmbH, BL Crosslinkers | 封闭型异氰酸酯PVC塑料溶胶附着力促进剂，适用于汽车密封剂，应用于可见区域和抗裂底漆 | Request Sample |
| Tetrahydrofuran | Monument Chemical | Tetrahydrofuran is a colorless, clear liquid. It has a density of 0.885 to 0.890 kg/dm3, and a minimum purity weight percentage of 99.8. This product is used in adhesives, magnetic tape, PVC cement, and pharmaceutical solvents, | |
| Nichigo-Polyester LP-050 | Nippon Gohsei | Nichigo-Polyester LP-050 is a high molecular weight saturated polyester resin featuring high durability and adhesion properties. This product is well suited for use in adhesive films and labels, laminates, polyester adhesives, and PVC backing applications...展开 Nichigo-Polyester LP-050 is a high molecular weight saturated polyester resin featuring high durability and adhesion properties. This product is well suited for use in adhesive films and labels, laminates, polyester adhesives, and PVC backing applications. 收起 | |
| Proviplast 2604 | Proviron | Proviplast 2604 is a citrate ester which is used as solvent in numerous applications and as a general purpose plasticizer for PVC polymers and cellulosic films. It is safe to use, has low odour and excellent colour stability. | |
| Nichigo-Polyester XI-1002 [Prototype] | Nippon Gohsei | Nichigo-Polyester XI-1002 [Prototype] is a high molecular weight saturated polyester resin featuring excellent holding power. This product is well suited for use in optical and polyester adhesives, laminates, adhesive films and labels, and PVC backing mat...展开 Nichigo-Polyester XI-1002 [Prototype] is a high molecular weight saturated polyester resin featuring excellent holding power. This product is well suited for use in optical and polyester adhesives, laminates, adhesive films and labels, and PVC backing materials. 收起 | |
| Ecodis™ P 50 | Arkema Rheology & Specialty Additives | Ecodis™ P 50 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration)...展开 Ecodis™ P 50 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). 收起 | Request Sample |
| GENOMER* 4215 | Rahn AG | 脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| Tetrahydrofuran | Chemceed | Tetrahydrofuran (THF) is a versatile, highly polar solvent that is used in the manufacturer of adhesives, cellophane, elastomers, inks, pharmaceuticals, polyurethane coatings, PVC cement, and vinyl films. THF is used as a precursor to many polymers or che...展开 Tetrahydrofuran (THF) is a versatile, highly polar solvent that is used in the manufacturer of adhesives, cellophane, elastomers, inks, pharmaceuticals, polyurethane coatings, PVC cement, and vinyl films. THF is used as a precursor to many polymers or chemical syntheses. 收起 | |
| Nichigo-Polyester TP236 | Nippon Gohsei | Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC bac...展开 Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC backing materials. 收起 | |
| Solvent Orange 63 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Orange 63 is used in coloring for polystyrene, PS, HIPS, ABS, PC, RPVC, PMMA, SAN, AS, PA6, PET, ABS resin, polymethylmethacrylate, resin, unplasticized pvc and other plastics, also used in coloring of estron, caprone and terylene laser device. | |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展开 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
| VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展开 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| COPONYL™ 5697 | Nippon Gohsei | COPONYL™ 5697 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It is a general use hard-type resin used in PVC backing materials. This product is well suited for use in adhesives. | |
| COPONYL™ 5698 | Nippon Gohsei | COPONYL™ 5698 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It is a general use soft-type resin used in PVC backing materials. This product is well suited for use in adhesives. | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| GENOMER* 1122TF | Rahn AG | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...展开 GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. 收起 | Request Sample |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| Nichigo-Polyester TP220 | Nippon Gohsei | Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester adhesives, and PVC...展开 Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester adhesives, and PVC backing materials. 收起 | |
| Ecodis™ C 30 | Arkema Rheology & Specialty Additives | Ecodis™ C 30 has been especially developed as a lighter-colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC...展开 Ecodis™ C 30 has been especially developed as a lighter-colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC. 收起 | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC...展开 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
| GENOMER* 4215/M22 | Rahn AG | 以GENOMER1122为载体的脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...展开 Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dioctyl Phthalate (DOP) | Chemceed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...展开 Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...展开 BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. 收起 | |
| Crystic® Scottbond 119PA White | Scott Bader | Crystic® Scottbond 119PA White is a lightweight bonding paste with a non-sagging compound that is meant for bonding rigid PVC foam and balsa cores to make sandwich laminates. It is highly thixotropic, has low specific gravity with weight saving and good h...展开 Crystic® Scottbond 119PA White is a lightweight bonding paste with a non-sagging compound that is meant for bonding rigid PVC foam and balsa cores to make sandwich laminates. It is highly thixotropic, has low specific gravity with weight saving and good handling properties. 收起 | |
| Diisononyl Phthalate (DINP) | Chemceed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...展开 Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Ecodis™ P 90 | Arkema Rheology & Specialty Additives | Ecodis™ P 90 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentrati...展开 Ecodis™ P 90 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). It also provides improved scrub resistance. 收起 | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...展开 DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. 收起 | Request Sample |
| High Chlorinated Polyethylene Adhesive Level - YURON HCPE-H(B) | Yuron New Material | YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...展开 YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. 收起 | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC...展开 Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. 收起 | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...展开 Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. 收起 | |
| Epoxidized Soybean Oil (ESO) | Chemceed | 环氧化大豆油，是一种增塑剂，通常用于PVC和涂料应用。ChemCeed以桶装、手提袋装和散装供应。包装需定制的请来电查问 | |
| Nichigo-Polyester TP235 | Nippon Gohsei | Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC...展开 Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC backing materials. 收起 | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...展开 Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. 收起 | |
| Dibutyl Phthalate (DBP) | Chemceed | 邻苯二甲酸二丁酯是一种增塑剂，通常应用于PVC和涂料中。ChemCeed以桶装、手提袋装和散装供应。包装需定制的请来电查问 | |
| PChem® BM71 | Pioneer Chemicals Co., Ltd. | PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC...展开 PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC replacement in automotive plastisol, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM71 has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.54. 收起 | |
| Tackwhite AR 35 | Ichemco | Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label producti...展开 Tackwhite AR 35 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 51-53% as a Brookfield viscosity at 25°C of 200-300 mPa.s. Tackwhite AR 35 is most commonly used in removable PVC, PE, and BOPP label production applications. 收起 | |
| Ecodis™ P 30 | Arkema Rheology & Specialty Additives | Ecodis™ P 30 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration)...展开 Ecodis™ P 30 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. 收起 | Request Sample |
| Tackwhite AMC 3 DS | Ichemco | Tackwhite AMC 3 DS is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 39-41% as a Brookfield viscosity at 25°C of 800-1000 mPa.s. Tackwhite AMC 3 DS is most commonly used in removable and replaceable PVC label...展开 Tackwhite AMC 3 DS is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 39-41% as a Brookfield viscosity at 25°C of 800-1000 mPa.s. Tackwhite AMC 3 DS is most commonly used in removable and replaceable PVC label production applications. 收起 | |
| Tackwhite AMC 4 D | Ichemco | Tackwhite AMC 4 D is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 46-48% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite AMC 4 D is most commonly used in removable and replaceable PVC label p...展开 Tackwhite AMC 4 D is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 46-48% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite AMC 4 D is most commonly used in removable and replaceable PVC label production applications. 收起 | |
| Vylon 630 | DKSH | Vylon 630 is a high molecular weight copolyester with low Tg. Vylon 630 has excellent flexibility and good general adhesion strength. Vylon 630 is recommended for adhesion on PET, PVC, metals, coil, and can coatings. Vylon 630 is compliant with FDA 175.10...展开 Vylon 630 is a high molecular weight copolyester with low Tg. Vylon 630 has excellent flexibility and good general adhesion strength. Vylon 630 is recommended for adhesion on PET, PVC, metals, coil, and can coatings. Vylon 630 is compliant with FDA 175.105 (only for non-alcoholic food and beverage). 收起 | Request Sample |
| CLiQSMART® 1011 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1011 is an opaque liquid defoamer with a mineral oil base that is used in aqueous systems. Defoaming efficiency is accelerated by modifying surface-active materials and low levels of polysiloxanes. It is applied to emulsion-based plasters, mid to high pvc...展开 CLiQSMART® 1011 is an opaque liquid defoamer with a mineral oil base that is used in aqueous systems. Defoaming efficiency is accelerated by modifying surface-active materials and low levels of polysiloxanes. It is applied to emulsion-based plasters, mid to high pvc latex paints and high viscous adhesive systems. 收起 | |
| Dibutyl Maleate (DBM) | Chemceed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...展开 Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. 收起 | |
| Dibutyl Sebacate (DBS) | Chemceed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...展开 Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. 收起 | |
| Tackwhite AMC 3 D | Ichemco | Tackwhite AMC 3 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 10-20 cm, and a peel of 150-250 g/in. Tackwhite AMC 3 D is most commonly used in removable and repositionable PVC label ...展开 Tackwhite AMC 3 D is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 10-20 cm, and a peel of 150-250 g/in. Tackwhite AMC 3 D is most commonly used in removable and repositionable PVC label production applications. 收起 | |
| Baristar® 8810 | Minerals Girona S.A. | Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 8815 | Minerals Girona S.A. | Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 8825 | Minerals Girona S.A. | Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9008 | Minerals Girona S.A. | Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9010 | Minerals Girona S.A. | Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| BARISTAR® 9015 | Minerals Girona S.A. | Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9025 | Minerals Girona S.A. | Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9208 | Minerals Girona S.A. | Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 | |
| Baristar® 9210 | Minerals Girona S.A. | Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC...展开 Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起 |
