| TK-1181 | Quaker Color (a Division of McAdoo & Allen, Inc.) | TK-1181 is a soft, water based, aromatic polyurethane dispersion use to promote adhesion and penetration in all types of leather base coats. It is used at levels between 5-20% in all types of leather base coats to promote adhesion and penetration. | |
| Epokukdo KSR-177 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poo...展开 Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poor adhesion. KSR-177 follows the trends of lightweight using light materials. 收起 | |
| Polyester Actylate SP 224 | Soltech Ltd | Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives...展开 Polyester Actylate SP 224 is an acid modified polyester acrylate oligomer that is designed to provide adhesion on glass and plastics, light color, and inter-coat adhesion. Common applications of this product include primers for metal, laminating adhesives, and screen inks. Polyester Actylate SP 224 is 70% polymer solid by weight with a viscosity of 50,000-100,000 at 25℃. 收起 | |
| Polyester Actylate SP 236 | Soltech Ltd | Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...展开 Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. 收起 | |
| Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...展开 Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. 收起 | |
| Polyester Actylate SP 236L | Soltech Ltd | Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...展开 Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. 收起 | |
| Polyester Actylate SP 238 | Soltech Ltd | Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...展开 Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. 收起 | |
| Flex-Rez™ 1094 CS C | Lawter | Flex-Rez™ 1094 CS C is a co-solvent soluble polyamide resin that provides gel resistance and good adhesion to treated film. It is compatible with high-acid value rosin, rosin-derived resins and also finds itself providing good adhesion, chemical resistanc...展开 Flex-Rez™ 1094 CS C is a co-solvent soluble polyamide resin that provides gel resistance and good adhesion to treated film. It is compatible with high-acid value rosin, rosin-derived resins and also finds itself providing good adhesion, chemical resistance and high gloss. The product is used in flexographic and gravure inks and overprint varnishes. 收起 | |
| Full Acrylate SA 345 | Soltech Ltd | Full Acrylate SA 345 is an acrylic oligomer diluted with 1,6 hexanediol diacrylate and tripropyleneglycol diacrylate monomers that is designed to provide flexibility, intercoat adhesion, and adhesion to substrates. Common applications of this product incl...展开 Full Acrylate SA 345 is an acrylic oligomer diluted with 1,6 hexanediol diacrylate and tripropyleneglycol diacrylate monomers that is designed to provide flexibility, intercoat adhesion, and adhesion to substrates. Common applications of this product include plastic coatings and plastic screen inks. Full Acrylate SA 345 is 54% polymer solid by weight with a viscosity of 18,000-28,000 at 25℃. 收起 | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| SiSiB® PC6112 | SiSiB SILICONES | SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals fro...展开 SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. 收起 | |
| Epokukdo KR-818 | Kukdo Chemical Co., Ltd. | Epokukdo KR-818 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-818 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-818 is especially used ...展开 Epokukdo KR-818 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-818 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-818 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexural strength and water resistance both at the ambient temperature and at the low temperature. 收起 | |
| Epokukdo KR-208 | Kukdo Chemical Co., Ltd. | Epokukdo KR-208 is a NBR modified epoxy resin including epoxy diluents. Accordingly, KR-208 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-208 has good compatibility with a conventional...展开 Epokukdo KR-208 is a NBR modified epoxy resin including epoxy diluents. Accordingly, KR-208 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-208 has good compatibility with a conventional epoxy resin and hardeners with excellent flexibility, adhesion strength and toughness for the wide range of temperatures. It also has good water resistance and excellent oil resistance. 收起 | |
| Epokukdo KR-450 | Kukdo Chemical Co., Ltd. | Epokukdo KR-450 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-450 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-450 is especially used ...展开 Epokukdo KR-450 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-450 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-450 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexural strength and water resistance both at the ambient temperature and at the low temperature. 收起 | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...展开 Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. 收起 | |
| VISIOMER® MEEU 25 M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers. | |
| Novapol U7102-70 | Novaresine S.r.l | Novapol U7102-70 is an orthophthalic polyester resin that displays low reactivity and excellent adhesion. This product is ideal for use in formulating thixotropic putties. | |
| Novapol U7108-61 | Novaresine S.r.l | Novapol U7108-61 is a very clear, orthophthalic polyester resin with high adhesion and low viscosity. This product is ideal for use in bonding adhesives and mastics. | |
| Epokukdo KR-207 | Kukdo Chemical Co., Ltd. | epokukdo KR-207 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin with tri-functional epoxy resin. Accordingly, KR-207 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temper...展开 epokukdo KR-207 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin with tri-functional epoxy resin. Accordingly, KR-207 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-207 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. 收起 | |
| Sintopol MD 100/80% E.A. | Sintochem s.r.l. | Sintopol MD 100/80% E.A. is a 80% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin...展开 Sintopol MD 100/80% E.A. is a 80% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 100/80% E.A. is primarily used in inks, paints and coatings. 收起 | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Sintopol SP 75/80% E.A. | Sintochem s.r.l. | Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flex...展开 Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. 收起 | |
| Polyester Actylate SP 220 | Soltech Ltd | Polyester Actylate SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate that is designed to provide adhesion on glass and plastics, light color, and adhesion between substrates. Common applications of this product include...展开 Polyester Actylate SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate that is designed to provide adhesion on glass and plastics, light color, and adhesion between substrates. Common applications of this product include overprint varnish, post formable inks, wet litho inks, and primer coatings for metal. Polyester Actylate SP 220 is 60% polymer solid by weight with a viscosity of 30,000-50,000 at 25℃. 收起 | |
| Sintopol SP 75 LV/80% E.A. | Sintochem s.r.l. | Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure an...展开 Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. 收起 | |
| Nichigo-Polyester LP033 | Nippon Gohsei | Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives. | |
| EBECRYL® 716 | Allnex | EBECRYL® 716 is a chlorine-free inert binder diluted with TMPTA. It has been specifically designed to provide good adhesion to non-corona treated rigid plastic substrates. | Request Sample |
| Sintopol MD 100/100% | Sintochem s.r.l. | Sintopol MD 100/100% is a gardner color 2 max urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated po...展开 Sintopol MD 100/100% is a gardner color 2 max urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This lasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 100/100% is primarily used in inks, paints and coatings. 收起 | |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| VISIOMER® HEMA-P 100 | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion ...展开 VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion resistance and improves film strength. It can be used e.g. as a functional co-monomer in acrylic emulsion for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations. 收起 | |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| Novapol U7120-68 | Novaresine S.r.l | Novapol U7120-68 is an amine-accelerated, orthophthalic polyester resin that provides good general properties in putties, including high adhesion and reactivity. This product is designed for use in mastics. | |
| Sintopol MD 95/75% E.A. | Sintochem s.r.l. | Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic i...展开 Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 95/75% E.A. is primarily used in inks, paints and coatings. 收起 | |
| AT-7288 | Antex Chemicals (Zhongshan) Limited | AT-7288 is a self-cross linking vinyl acrylic copolymer emulsion that appears as a milky, white liquid with excellent adhesion properties. This product is specially designed for lamination in adhesive applications. | |
| VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
| Epokukdo KR-309 | Kukdo Chemical Co., Ltd. | Epokukdo KR-309 is a NBR modified epoxy resin showing good flexibility, adhesion strength and excellent peel strength. KR-309 is mainly used in various industrial adhesive applications including one component epoxy system. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha CP-710 | Hanwha Chemical Corporation | Hanwha CP-710 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-710 is well suited for use in the production of inks, adhesives and paints. | |
| Pinerez® 7016 E | Lawter | Pinerez® 7016 E is a low viscosity ester of rosin that has low volatile organic components (VOC's). They show good compatibility with various polymers and also shows good viscosity stability. The resin improves adhesion in flooring adhesives. | |
| Sintopol MD 110/75% E.A. | Sintochem s.r.l. | Sintopol MD 110/75% E.A. is a 75% solution in ethyl acetate of a polyurethane resin, not reactive, with good adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/75% E.A. is designed to be formulated with gravure...展开 Sintopol MD 110/75% E.A. is a 75% solution in ethyl acetate of a polyurethane resin, not reactive, with good adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/75% E.A. is designed to be formulated with gravure and flexographic inks, in addition with cellulose and vinyl film formers. This product formulation provides adhesion, a gloss finish and resistance to heat sealing. Sintopol MD 100/75% E.A. is primarily used in inks, paints and coatings. 收起 | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| VISIOMER® DMAPMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® DMAPMA is an amino functional methacrylate monomer that is used to improve pigment wetting and substrate adhesion to polymers. Suggested applications include paints and coatings, paper and water and cosmetic applications. | |
| CN9250A75 | Sartomer Americas | CN9250A75 is a trifunctional aliphatic urethane acrylate, diluted in TPGDA, for use in ultra violet and electron beam curing compositions. It offers scratch resistance, good flexibility, high adhesion, and good pigment wetting. | |
| Domide G-0331 | Kukdo Chemical Co., Ltd. | Domide G-0331 is a reactive medium viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for making grouts, moldings, adhesives and sealants. | |
| SiSiB® PC6122 | SiSiB SILICONES | SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV sili...展开 SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. 收起 | |
| VISIOMER® HEMA-P 70M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metal...展开 VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct to metal coatings, it enhances corrosion resistance and improves film strength. VISIOMER® HEMA-P 70M can be used e.g. as a functional co-monomer in acrylic emulsions for coating resins or as an adhesion promoter in adhesive formulations. 收起 | |
| VISIOMER® TRGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins. | |
| Sintopol MD 110/65% E.A. | Sintochem s.r.l. | Sintopol MD 110/65% E.A. is a gardner 2 max color 65% solution in ethyl acetate of a polyurethane resin, not reactive, with adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/65% E.A. is designed to be formulat...展开 Sintopol MD 110/65% E.A. is a gardner 2 max color 65% solution in ethyl acetate of a polyurethane resin, not reactive, with adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/65% E.A. is designed to be formulated with gravure and flexographic inks, in addition with cellulose and vinyl film formers. This product formulation provides adhesion, a gloss finish and resistance to heat sealing. Sintopol MD 110/65% E.A. is primarily used in inks, paints and coatings. 收起 | |
| VISIOMER® THFMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® THFMA is a low viscosity, low odor mono methacrylate monomer that impacts flexibility and adhesion to adhesive applications. Due to its low volatility, it can be used as reactive diluent for reactive systems, e.g. adhesives | |
| Novapol U7307-68 | Novaresine S.r.l | Novapol U7307-68 is a low viscosity orthophthalic resin that delivers excellent adhesion, high reactivity even at low temperatures, and good hardness development. This product is ideal for use in polishes and reinforcing mastics. | |
| Domide G-5022 | Kukdo Chemical Co., Ltd. | Domide G-5022 is a reactive polyamide resin which shows excellent adhesion, toughness, water and chemical resistance as a curing agent for epoxy coatings and adhesives. It is particularly designed for use in solvent-based surface coatings. | |
| EPOSIR® 7134 80 XL | SIR Industriale SpA | EPOSIR® 7134 80 XL is a semisolid low molecular weight epoxy resin solution in xylene. It provides improved adhesion and impact strengths. This product is well suited for formulation of adhesives, fiber reinforced composite materials, and coatings. | |
| VISIOMER® TMPTMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers. | |
| Uni-Dur E 2002 ARFE | S.A.P.I.C.I. SpA | Uni-Dur E 2002 ARFE is an adhesive that is soluble in ethyl acetate. This product significantly improves the adhesion, cohesion, and heat resistance of the final bond. It can be used to cross-link polyurethane adhesives for natural or synthetic rubber. | |
| VISIOMER® MADAME™ | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MADAME™ is a monofunctional methacrylate with a tertiary amino group in the side chain. Ideal for improving adhesion of formulations. Also used for the preparation of cationic polymers, especially quaternary ammonium polymers and flocculants. | |
| Sintopol MD 95/100% | Sintochem s.r.l. | Sintopol MD 95/100% is a urethane polymer with an excellent adhesion on the treated polyolefins. Sintopol MD 95/100% is a little more plastic polyurethane than Sintopol MD 100. This product is Gravure and flexographic inks for treated polyethylene and pol...展开 Sintopol MD 95/100% is a urethane polymer with an excellent adhesion on the treated polyolefins. Sintopol MD 95/100% is a little more plastic polyurethane than Sintopol MD 100. This product is Gravure and flexographic inks for treated polyethylene and polypropylene. It is a plasticizing resin in nitrocellulose based systems with good adhesion, low odor and good temperature resistance. Usually the use in the formula of polypropylene micro-crystalline waxes is suggested. Sintopol MD 95/100% is primarily used as an additive in inks, paints and coatings. 收起 | |
| Nichigo-Polyester WR-961 | Nippon Gohsei | Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and la...展开 Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起 | |
| CN9200 | Sartomer Americas | CN9200 is a difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. It offers the following properties: toughness, flexibility, non yellowing, excellent adhesion, combined with low odour and low skin irritat...展开 CN9200 is a difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. It offers the following properties: toughness, flexibility, non yellowing, excellent adhesion, combined with low odour and low skin irritation. 收起 | |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | Request Sample |
| MR-424 | LUKEM D.O.O. | MR-424 is a gum rosin modified maleic resin. The product has a stable color and exhibits good heat resistance and adhesion. With a softening point between 120ºC and 130ºC, MR-424 is intended for use in paints, inks, and adhesives. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| EPOCROS™ WS-500 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It e...展开 EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). EPOCROS™ WS-500 is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. 收起 | Request Sample |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起 | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...展开 Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. 收起 | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...展开 Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. 收起 | |
| Novares® TL 10 | Rain Carbon Germany GmbH | Novares® TL 10 is a liquid but high viscous hydrocarbon resin. It is ideal for use in primers for marine and industrial paints to imporve hydrophobicity, flexibility and adhesion properties on metals. Detailed information is available upon request. | |
| Novares® TL 90 | Rain Carbon Germany GmbH | Novares® TL 90 is a liquid but high viscous hydrocarbon resin. It is ideal for use in primers for marine and industrial paints to imporve hydrophobicity, flexibility and adhesion properties on metals. Detailed information is available upon request. | |
| Novares® TL 120 | Rain Carbon Germany GmbH | Novares® TL 120 is a liquid but high viscous hydrocarbon resin. It is ideal for use in primers for marine and industrial paints to imporve hydrophobicity, flexibility and adhesion properties on metals. Detailed information is available upon request. | |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sea...展开 Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| Tackwhite A 305 SL | Ichemco | Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a high...展开 Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a higher adhesive power is required. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| AT-6854 | Antex Chemicals (Zhongshan) Limited | AT-6854 is a self-cross linking styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product can be used as the back coating for long-pile fabrics, and can provide superb hand-feel and adhesion. | |
| Hydro-Rez™ 800 E | Lawter | Hydro-Rez™ 800 E is a water-based acrylic, especially created for water-based inks. It displays good adhesion on non-absorbing substrates with applications in gravure and flexographic inks, overprint varnishes and coatings and in film and foil. | |
| VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展开 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
| MR-422 | LUKEM D.O.O. | MR-422 is a gum rosin modified maleic resin. The product has a stable color and exhibits good heat resistance and adhesion. With a softening point between 125ºC and 135ºC, MR-422 is intended for use in paints and inks. | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion...展开 UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. 收起 | |
| CN9276 | Sartomer Americas | CN9276 is a tetrafunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. Key properties include toughness, excellent adhesion, scratch resistance, and non yellowing. It is particularly suitable for lithographi...展开 CN9276 is a tetrafunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. Key properties include toughness, excellent adhesion, scratch resistance, and non yellowing. It is particularly suitable for lithographic inks, flexographic inks, and varnishes on plastic. 收起 | |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...展开 SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. 收起 | |
| EBECRYL® 575 | Allnex | EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness...展开 EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. 收起 | Request Sample |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...展开 Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. 收起 | |
| Tackwhite A 305 SL (V3) | Ichemco | Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications w...展开 Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications where a higher adhesive power is required. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...展开 Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| Epotec® YD 136 | Aditya Birla | Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesive...展开 Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesives, and solvent-based coatings. 收起 | |
| Pinerez® 2396 E | Lawter | Pinerez® 2396 E is a tackifier resin that is ideally suited to improve adhesion and tack in hot-melt adhesives. The product is part of the Pinerez™ range of products that are stabilized resins with good viscosity stability and show compatibility with vari...展开 Pinerez® 2396 E is a tackifier resin that is ideally suited to improve adhesion and tack in hot-melt adhesives. The product is part of the Pinerez™ range of products that are stabilized resins with good viscosity stability and show compatibility with various polymers that are used in pressure-sensitives adhesives. 收起 | |
| EPOCROS™ WS-700 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crossl...展开 EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. EPOCROS™ WS-700 has a long pot life for one packaging. 收起 | Request Sample |
| Epokukdo UME-315 | Kukdo Chemical Co., Ltd. | Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...展开 Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo UME-305 | Kukdo Chemical Co., Ltd. | Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...展开 Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo UME-330 | Kukdo Chemical Co., Ltd. | Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact s...展开 Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| Nichigo-Polyester W-0030 | Nippon Gohsei | Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coati...展开 Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coatings and primers, and optical adhesives. 收起 | |
| Nichigo-Polyester TP235 | Nippon Gohsei | Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhes...展开 Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC backing materials. 收起 | |
| Makrovil PAC 243 | Indulor Chemie GmbH | Makrovil PAC 243 is an emulsion polymer based on acrylates that is carboxylated. It is a binder with excellent adhesion on fiberboards, very good transfer, and excellent resolubility. Makrovil PAC 243 is used in base coatings on fiberboard and printin...展开 Makrovil PAC 243 is an emulsion polymer based on acrylates that is carboxylated. It is a binder with excellent adhesion on fiberboards, very good transfer, and excellent resolubility. Makrovil PAC 243 is used in base coatings on fiberboard and printing inks on wood. 收起 | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...展开 UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. 收起 |
