| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 4-PHENYL-BENZOPHENON | DKSH | 4-PHENYL-BENZOPHENON is an aromatic ketone compound, which is a type Ⅱ photoinitiator. It can be used as photoinitiator in UV curable coatings and inks. 4-PHENYL-BENZOPHENON can be used in UV curable coatings and inks. | Request Sample |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...展开 Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. 收起 | |
| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| Acrylated Amine Oligomer SZ 225 | Soltech Ltd | Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehi...展开 Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehicles, clear paper coatings, wood coatings, and wood fillers. Acrylated Amine Oligomer SZ 225 is 100% polymer solid by weight with a viscosity of 500-1,100 at 25℃. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...展开 Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...展开 Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1204 LS | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...展开 Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1310 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25...展开 Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1401 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31...展开 Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E2203 LC | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer co...展开 Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin E2203 LC has an initial colour (YI) value of 23. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 213 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 213 has an initial colour (YI) value of 87. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 288S | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 807 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 807 has an initial colour (YI) value of 32. 收起 | |
| Aliphatic Urethane Acrylate SU 519 | Soltech Ltd | Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic a...展开 Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic adhesives, thick film casting, plastic coatings, clear coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 519 is 70% polymer solid by weight with an mPa.s viscosity of 12,000-18,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...展开 Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5347 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, gl...展开 Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 5347 is 100% polymer solid by weight with a mPs.s viscosity of 600-1,200 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...展开 Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antiox 2246 | Ichemco | Antiox 2246 is a phenolic antioxidant. This product has a melting range of greater than 125°C. Antiox 2246 is most commonly used as an antioxidant in solvent-based adhesive applications. | |
| Antiox AHM | Ichemco | Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and c...展开 Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. 收起 | |
| Antiox AHM-EC Pellets | Ichemco | Antiox AHM-EC Pellets are a blend of four non-staining antioxidants. This product has a total solids content of 98-100%. Antiox AHM-EC Pellets are most commonly used as a UV protector in pressure sensitive adhesive and coating applications. | |
| Antiox LX | Ichemco | Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural r...展开 Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural rubber, SBR, and resin adhesive applications. 收起 | |
| Antischiuma FL5 | Ichemco | Antischiuma FL5 is a VOC-free, organic defoamer. This product has a Brookfield viscosity at 25°C of 200-500 mPa.s. Antischiuma FL5 is most commonly used as a defoaming agent in water-based adhesive production applications. | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| Aquarez EVA T21 | Aquaspersions | Aquarez EVA T21 is an APEO-free, water-based emulsion of a tackified EVA terpolymer. This product has excellent adhesion to a wide variety of substrates, including aluminum, polyethylene, polyester and paper. It can be used as a base for the formulation...展开 Aquarez EVA T21 is an APEO-free, water-based emulsion of a tackified EVA terpolymer. This product has excellent adhesion to a wide variety of substrates, including aluminum, polyethylene, polyester and paper. It can be used as a base for the formulation of low-activation temperature heat-seal coating. Aquarez EVA T21 comes in a low-viscosity, easy-to-handle water-based form and has excellent storage stability. 收起 | |
| Araldite® GY 257 | Jubail Chemical Industries Co. | Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and ...展开 Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation of solvent-free coatings and structure adhesives. 收起 | |
| Araldite® GY 6010 | Jubail Chemical Industries Co. | Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of c...展开 Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of chemical resistant coatings and matrix adhesives. 收起 | |
| Araldite® GY 6010 CSR | Jubail Chemical Industries Co. | Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the f...展开 Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the formulation of chemical resistant coatings and matrix adhesives. 收起 | |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...展开 Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. 收起 | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...展开 Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 收起 | |
| AT-6256 | Antex Chemicals (Zhongshan) Limited | AT-6256 is a self cross-linking, all-acrylic copolymer that appears as a milky, white liquid. This product can be used as a flocking adhesive for cotton and nylon substrates, and exhibits soft handfeel, good scrubbing resistance and low formaldehyde. | |
| AT-6258 | Antex Chemicals (Zhongshan) Limited | AT-6258 is a self cross-linking all-acrylic copolymer that appears as a milky, white liquid. This product can be used as a flocking adhesive for cotton and nylon substrates, and exhibits soft handfeel, good scrubbing resistance, and low formaldehyde. | |
| AT-6959A | Antex Chemicals (Zhongshan) Limited | AT-6959A is a self cross-linking all acrylic emulsion that appears as a milky, white liquid with low film-forming temperature and good mechanical stability. This product can be used for electrostatic flocking adhesive and non-woven coating applications. | |
| AT-7105M | Antex Chemicals (Zhongshan) Limited | AT-7105M is a vinyl acetate homopolymer emulsion that appears as a milky, white viscous liquid. This product is APEO-free and can be used in adhesive applications. | |
| AT-7288 | Antex Chemicals (Zhongshan) Limited | AT-7288 is a self-cross linking vinyl acrylic copolymer emulsion that appears as a milky, white liquid with excellent adhesion properties. This product is specially designed for lamination in adhesive applications. | |
| AT-7630 | Antex Chemicals (Zhongshan) Limited | AT-7630 is a vinyl acetate homopolymer emulsion that appears as a milky, white viscous liquid. This product can be used as a general purpose adhesive completed with flame retardant agent for different substrates. | |
| Atrepol P180 | Atcoat GmbH | Atrepol P180 is a saturated poly ester resin in combination with Desmodur that is highly flexible and for the production of soft-feel coatings and highly flexible 2-K adhesives for glossy foil lamination. Atrepol P180 has a solid of 100% and a viscosity o...展开 Atrepol P180 is a saturated poly ester resin in combination with Desmodur that is highly flexible and for the production of soft-feel coatings and highly flexible 2-K adhesives for glossy foil lamination. Atrepol P180 has a solid of 100% and a viscosity of 185 to 235 dPas. 收起 | |
| Blendex 31 | Ichemco | Blendex 31 is a solvent-based, heat sealable adhesive. This product has a total solids content of 21-23% and a Brookfield viscosity at 25°C of 400-1000 cPs. Blendex 31 is most commonly used to bond rubber compounds to metal and polymeric substrates. | |
| Blendex 70 A | Ichemco | Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most common...展开 Blendex 70 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate). solvent-based, heat sealable adhesive. This product has a total solids content of 64-66% and a Brookfield viscosity at 25°C of 670-870 cPs. Blendex 70 A is most commonly used as a solvent adhesive in coating system applications. 收起 | |
| Blendex 75 A | Ichemco | Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most comm...展开 Blendex 75 A is a monocomponent polyurethane adhesive in solvent phase (Ethyl Acetate) solvent-based, heat sealable adhesive. This product has a total solids content of 74-76% and a Brookfield viscosity at 25°C of 3300-5300 cPs. Blendex 75 A is most commonly used as a solvent adhesive in coating system applications. 收起 | |
| Blendex S 24/20 | Ichemco | Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonl...展开 Blendex S 24/20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 5500-7500 cPs. Blendex S 24/20 is most commonly used as a soft heat sealable adhesive in lamination applications. 收起 | |
| Blendex S 24/25 A | Ichemco | Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly us...展开 Blendex S 24/25 A is a solution of a thermoplastic polyurethane in acetone solvent-based, heat sealable adhesive. This product has a total solids content of 24-26% and a Brookfield viscosity at 25°C of 5000-7000 cPs. Blendex S 24/25 A is most commonly used as a soft heat sealable adhesive in lamination applications. 收起 | |
| Blendex S 24/25 MA | Ichemco | Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamina...展开 Blendex S 24/25 MA is a mat solution of a thermoplastic polyurethane in acetone, solvent-based, heat sealable adhesive. This product has a total solids content of 23-25%. Blendex S 24/25 MA is most commonly used as a soft heat sealable adhesive in lamination applications. 收起 | |
| Blendex S12 20 | Ichemco | Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly...展开 Blendex S12 20 is a thermoplastic polyurethane in methyl-ethyl-ketone solution, solvent-based, heat sealable adhesive. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 2000-6000 cPs. Blendex S12 20 is most commonly used as a soft heat sealable adhesive in lamination applications. 收起 | |
| Blendex Seal 81 DH | Ichemco | Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, fo...展开 Blendex Seal 81 DH is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 50-200 mPa.s. Blendex Seal 81 DH is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal 81 DH (V1) | Ichemco | Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 D...展开 Blendex Seal 81 DH (V1) is a water dispersion of vinyl-acrylic copolimers and slightly tacky additives heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 12,000-17,000 mPa.s. Blendex Seal 81 DH (V1) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal 81 DH (V2) | Ichemco | Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesi...展开 Blendex Seal 81 DH (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal 81 DH (V2) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal 81 DH (V3) | Ichemco | Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesi...展开 Blendex Seal 81 DH (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50%, and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal 81 DH (V3) is most commonly used as a heat sealable elastic adhesive in leather, foam, woven, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal C6 | Ichemco | Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, f...展开 Blendex Seal C6 is a water-based, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 7500-10,500 mPa.s. Blendex Seal C6 is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal C6 (V3) | Ichemco | Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,00...展开 Blendex Seal C6 (V3) is a a water dispersion of polyvinylacetate/maleate copolymer, stabilised with synthetic and cellulosic stabilisers, heat sealable adhesive. This product has a total solids content of 54-56% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal C6 (V3) is most commonly used as a soft heat sealable adhesive in leather, foam, fabric, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal DH 14 | Ichemco | Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile ap...展开 Blendex Seal DH 14 is a polyester based, aliphatic acqueous polyurethane dispersion, water-based, heat sealable adhesive. This product has a total solids content of 29-31%. Blendex Seal DH 14 is most commonly used as a heat sealable adhesive in textile applications. 收起 | |
| Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...展开 Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. 收起 | |
| Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...展开 Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. 收起 | |
| Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat s...展开 Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. 收起 | |
| Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat ...展开 Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. 收起 | |
| Blendex Seal DH 8 M (V2) | Ichemco | Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in f...展开 Blendex Seal DH 8 M (V2) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Blendex Seal DH 8 M (V2) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. 收起 | |
| Blendex Seal DH 8 M (V3) | Ichemco | Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in f...展开 Blendex Seal DH 8 M (V3) is a water-based, heat sealable adhesive. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 27,000-37,000 mPa.s. Blendex Seal DH 8 M (V3) is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. 收起 | |
| Blendex WUM | Ichemco | Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboa...展开 Blendex WUM is a water-based, synthetic latex heat sealable adhesive. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Blendex WUM is most commonly used as a remoistable adhesive in paper and cardboard applications. 收起 | |
| Burez® DRS P80 E | Lawter | Burez® DRS P80 E is a potassium soap of disproportionated rosin with 80% solids and has as its main application as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulat...展开 Burez® DRS P80 E is a potassium soap of disproportionated rosin with 80% solids and has as its main application as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulations and organic pigment production, with applications in pigment coatings and adhesives. 收起 | |
| Burez® DRS S70 E | Lawter | Burez® DRS S70 E is a rosin soap with 70% solids content and is a sodium soap of disproportionated rosin. Its main application is as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed fo...展开 Burez® DRS S70 E is a rosin soap with 70% solids content and is a sodium soap of disproportionated rosin. Its main application is as an emulsifier in emulsion polymerization. The rosin soap is part of the Burez® range of products that is also designed for wet glue formulations and organic pigment production, with applications in pigment coatings and adhesives. 收起 | |
| Burez® K80 505A E | Lawter | Burez® K80 505A E is a potassium soap with 80% solids and is considered for use primarily in resin pigments for inks. The Burez® range of products is mainly designed for emulsion polymerization, wet glue formulations and organic pigment production. | |
| Burez® NA45 E | Lawter | Burez® NA45 E is a sodium soap of modified rosin that has been stabilized to prevent crystallization. Its main application is its use in bottle labeling adhesives. The Burez® range of products is designed for emulsion polymerization, wet glue formulations...展开 Burez® NA45 E is a sodium soap of modified rosin that has been stabilized to prevent crystallization. Its main application is its use in bottle labeling adhesives. The Burez® range of products is designed for emulsion polymerization, wet glue formulations and organic pigment production. 收起 | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...展开 BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| C9-10 | SWISLOYD LIMITED | C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...展开 C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| C9-12 | SWISLOYD LIMITED | C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...展开 C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| C9-7 | SWISLOYD LIMITED | C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...展开 C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| C9-8 | SWISLOYD LIMITED | C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...展开 C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 收起 | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...展开 CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 收起 | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...展开 CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 收起 | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...展开 CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 收起 | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material | YURON CR-400是一种氯化橡胶产品，以白色粉末形式供应。主要用于在橡胶和金属应用中使用的粘合剂原料中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| CHS-Epoxy 324 | Spolchemie | CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambi...展开 CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 324 is primarily used as a bonding agent for adhesive and construction sealants. 收起 | |
| CHS-Epoxy 501 | Spolchemie | CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...展开 CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. 收起 | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...展开 CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. 收起 | |
| CHS-Epoxy 514 | Spolchemie | CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...展开 CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. 收起 | |
| CHS-Epoxy 521 | Spolchemie | CHS-Epoxy 521 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin is modified by mono-functional reactive diluent or solvent based on glycidyl-ether. It has the ability to cure at either an ambient or elevated temperature level....展开 CHS-Epoxy 521 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin is modified by mono-functional reactive diluent or solvent based on glycidyl-ether. It has the ability to cure at either an ambient or elevated temperature level. CHS-Epoxy 521 primary use is for laminating, potting, adhesives, solvent free, polymer concrete, self-levelling flooring. 收起 | |
| CHS-Epoxy 619 | Spolchemie | CHS-Epoxy 619 is a high performance modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a polyfunctional reactive diluent. It also has the ability to cure at ambient and elevated temperature levels. CH...展开 CHS-Epoxy 619 is a high performance modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a polyfunctional reactive diluent. It also has the ability to cure at ambient and elevated temperature levels. CHS-Epoxy 619 is primarily used for producing high level laminates, potting and adhesives. 收起 | |
| CHS-Epoxy G 530 | Spolchemie | CHS-Epoxy G 530 is a green colored and environmental friendly epoxy resin. This product is a low molecular weighted epoxy resin and has no modifiers based on BPA. It can be cured at ambient and elevated temperatures. This product resin is based on renewab...展开 CHS-Epoxy G 530 is a green colored and environmental friendly epoxy resin. This product is a low molecular weighted epoxy resin and has no modifiers based on BPA. It can be cured at ambient and elevated temperatures. This product resin is based on renewable resources with low crude oil content and high renewable content. CHS-Epoxy G 530 is EPD certified and it has significant savings in CO2. The primary use for this product is to be applied as a coating and an adhesive. 收起 | |
| Cinergi™ 2100 E | Lawter | Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has...展开 Cinergi™ 2100 E is a special varnish that is non-volatile and which is based on rosin resin, vegetable oil and mineral distillates. It shows good leafing, high gloss and oxidation and rub resistance. The product is ideally suited for metallic inks and has application in offset, sheet-fed, web-fed and letterpress printing techniques. 收起 |
