| Heavy-Duty Impact Tester | BYK-Gardner USA | This impact tester has gained wide acceptance in testing the impact resistance of many types of coatings from paints to varnishes to tough plated, plastic or laminated coatings. It is also widely used to establish quality control standards for resistance ...展开 This impact tester has gained wide acceptance in testing the impact resistance of many types of coatings from paints to varnishes to tough plated, plastic or laminated coatings. It is also widely used to establish quality control standards for resistance to impact surface damage and penetration of many construction materials including plastics, resins, fiberglass, sheet metals, and plywood. 收起 |  |
| HeliPath Stand | BYK-Gardner USA | The Helipath stand is designed to lower and raise the viscometer so that its rotating shearing element will describe a helical path through the test sample. By always cutting into fresh material the problem of separating is eliminated. The reversing featu...展开 The Helipath stand is designed to lower and raise the viscometer so that its rotating shearing element will describe a helical path through the test sample. By always cutting into fresh material the problem of separating is eliminated. The reversing feature of the Helipath stand allows measurements to be made over a period of time. 收起 |  |
| High Throughput Cocrystal Screening | Automaxion | Automaxion has developed technology to perform solvent drop grinding (SDG) for cocrystal screening (48 in parallel possible). It is all performed in low cost GC vials at the 20 mg scale, and dispensing, processing and measurement is possible without remov...展开 Automaxion has developed technology to perform solvent drop grinding (SDG) for cocrystal screening (48 in parallel possible). It is all performed in low cost GC vials at the 20 mg scale, and dispensing, processing and measurement is possible without removing the sample from the vial. It is automation friendly, has no sample loss, no cleaning, and Direct FT-Raman possible. 收起 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的，同时由一个机器人控制所有其他项目的测量。 |  |
| Hoffman Scratch Hardness Tester | BYK-Gardner USA | The Hoffman Scratch Hardess Tester was developed for the comparative evaluation of scratch resistance and adhesion of many types of coatings. This instrument consists of a four-wheeled carriage, a scale arm graduated from 0-20 that is attached permanentl...展开 The Hoffman Scratch Hardess Tester was developed for the comparative evaluation of scratch resistance and adhesion of many types of coatings. This instrument consists of a four-wheeled carriage, a scale arm graduated from 0-20 that is attached permanently to the carriage in a counterpoised condition about the pivot axis, and a scratch tool with a sharp circular rim mounted at 45° to the flat test surface. 收起 |  |
| i1 Paint Handheld Spectrophotometer | X-Rite Europe GmbH | i1 Paint Handheld Spectrophotometer is a cost-effective and easy-to-use handheld spectrophotometer that enables retail paint associates to color match common samples, including fan deck cards and painted items. i1 Paint integrates with ColorDesigner PLUS ...展开 i1 Paint Handheld Spectrophotometer is a cost-effective and easy-to-use handheld spectrophotometer that enables retail paint associates to color match common samples, including fan deck cards and painted items. i1 Paint integrates with ColorDesigner PLUS paint software to quickly formulate and store custom paint recipes. Compared to visual color matching, a custom paint match done with i1 Paint will save up to 30 minutes per color match, reduce mismatched paints, and decrease waste. 收起 |  |
| Impact Test | TQC BV | The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct...展开 The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14 收起 |  |
| ISO Impact Tester | BYK-Gardner USA | ISO Impact Tester is used for testing impact resistance of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the ra...展开 ISO Impact Tester is used for testing impact resistance of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the rapid deformation caused by the falling weight. This instrument features an anodized guide tube with a scale in inches and mm, tolerance for ISO falling weights +/- 1g, and a maximum falling weight of 2 kg. It also has exchangeable falling weights and dies and can be easily converted for testing in accordance with ASTM. 收起 |  |
| Judge QC | X-Rite Europe GmbH | Judge QC integrates a light booth into a color evaluation workflow improves quality control, reduces waste due to rejects and rework, shortens time to market, and improves overall product quality. The durable and compact X-Rite Judge QC light booth offers...展开 Judge QC integrates a light booth into a color evaluation workflow improves quality control, reduces waste due to rejects and rework, shortens time to market, and improves overall product quality. The durable and compact X-Rite Judge QC light booth offers an economical way to evaluate color quality and identify color errors earlier in the process for a rapid ROI. 收起 |  |
| Laser Particle Sizer ANALYSETTE 22 MicroTec Plus | FRITSCH GmbH - Milling and Sizing | 分析方法：激光衍射样品类型：悬浮液，干粉剂，乳剂分散单位：湿法分散装置，干法分散装置，溜槽坠落，小体积湿法分散装置测量范围：0.08 - 2000μm测量时间：5-10秒（单次测量测量值的记录，2分钟（整个测量周期） - 光学装置：傅立叶转换设计，可移动测量单元（FRITSCH公司专利），每次测量采用一个或两个测量单元的位置。 |  |
| LASER PARTICLE SIZER ANALYSETTE 22 NANOTEC PLUS | FRITSCH GmbH - Milling and Sizing | 分析方法：激光衍射 - 样品类型：悬浮液，干粉剂，乳剂 - 分散单位：湿法分散装置，干法分散装置，溜槽坠落，小体积湿法分散装置 - 测量范围：0.01 - 2000微米 - 测量时间：5 - 10秒（单次测量测量值的记录，2分钟（整个测量周期） - 光学装置：傅立叶转换设计，可移动测量单元（FRITSCH公司专利），每次测量采用一个或两个测量单元的位置。 |  |
| LCM III | BYK-Gardner USA | The LCM III is a reliable color instrument which replaces conventional visual color evaluation with an objective measurement. It is ideal for routine production control of clear, transparent liquids like resins, adhesives and solvents. This instrument fea...展开 The LCM III is a reliable color instrument which replaces conventional visual color evaluation with an objective measurement. It is ideal for routine production control of clear, transparent liquids like resins, adhesives and solvents. This instrument features a large touch-screen display with intuitive user guidance for simple operation and automatic cuvette recognition, which helps avoid faulty data measurement. 收起 |  |
| LCS III | BYK-Gardner USA | The LCS III is a highly precise color instrument which spectrally measures all color shades of optically clear liquids. Besides the conventional visual color numbers (Gardner, Iodine, Hazen (APHA) etc.) the LCS can measure opponent color such as CIELab,...展开 The LCS III is a highly precise color instrument which spectrally measures all color shades of optically clear liquids. Besides the conventional visual color numbers (Gardner, Iodine, Hazen (APHA) etc.) the LCS can measure opponent color such as CIELab, XYZ and Yxy under the conditions of illumiant C (daylight) and 2° Standard Observer. 收起 |  |
| Light-Duty Impact Tester | BYK-Gardner USA | The Light-Duty Impact Tester should be used with materials that can be damaged or penetrated by small impact forces such as products mildly abused in households, offices or labs through years of normal use. It measures impact resistance of plastics and ot...展开 The Light-Duty Impact Tester should be used with materials that can be damaged or penetrated by small impact forces such as products mildly abused in households, offices or labs through years of normal use. It measures impact resistance of plastics and other materials. 收起 |  |
| Liquid Color Standards | BYK-Gardner USA | The BYK-Gardner Liquid Color Standard Comparator provides the entire BYK-Gardner Color Scale, against which a liquid sample can be visually compared. It has a rugged design for use in the laboratory and production, and offers quick and easy color quality ...展开 The BYK-Gardner Liquid Color Standard Comparator provides the entire BYK-Gardner Color Scale, against which a liquid sample can be visually compared. It has a rugged design for use in the laboratory and production, and offers quick and easy color quality control of liquids. 收起 |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滚球式粘度计，通过透明或不透明的液体根据Hoepple的落球原则计算球的滚动时间。该方法只需要400微升的液体。结果可通过运动学粘度和动力学粘度呈现。该粘度计简洁经济，可节省实验室的空间。是Anton Paar’s AMVn自动粘度计的更新版本。 |  |
| MA-5 QC Multi-Angle Spectrophotometer | X-Rite Europe GmbH | MA-5 QC Multi-Angle Spectrophotometer is built with quality control managers in mind, the MA-5 QC can identify color defects early in the manufacturing process and avoid unnecessary rework. Featuring strategically placed optics at the tip, it is 60% faste...展开 MA-5 QC Multi-Angle Spectrophotometer is built with quality control managers in mind, the MA-5 QC can identify color defects early in the manufacturing process and avoid unnecessary rework. Featuring strategically placed optics at the tip, it is 60% faster, 50% lighter, and 40% more compact than any other five-angle device on the market. This allows operators to easily position MA-5 QC with one hand and capture more measurements per hour. 收起 |  |
| MA-T12 Multi-Angle Spectrophotometer | X-Rite Europe GmbH | MA-T12 Multi-Angle Spectrophotometer sets the gold standard for establishing the highest level of quality for effect and complex materials. With its 12 spectral measurement angles and color calibrated camera, the MA-T12 can fully characterize both effect ...展开 MA-T12 Multi-Angle Spectrophotometer sets the gold standard for establishing the highest level of quality for effect and complex materials. With its 12 spectral measurement angles and color calibrated camera, the MA-T12 can fully characterize both effect and complex surface structured materials. Digital representation of a materials color and appearance can be modeled with SVBRDF (Spatially Varying Bidirectional Reflectance Distribution Function), creating an unparalleled digital workflow that ensures consistent product appearance across supply chains. 收起 |  |
| MA-T6 Multi-Angle Spectrophotometer | X-Rite Europe GmbH | MA-T6 Multi-Angle Spectrophotometer, with 6 angles of measurement, the MA-T6 can measure against rigorous standards for effect finishes and ensure conformance with tight tolerances. Precise readings of colored sparkle and coarseness taken with MA-T6 are r...展开 MA-T6 Multi-Angle Spectrophotometer, with 6 angles of measurement, the MA-T6 can measure against rigorous standards for effect finishes and ensure conformance with tight tolerances. Precise readings of colored sparkle and coarseness taken with MA-T6 are repeatable and reproducible, minimizing waste and re-work across the production process. 收起 |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 该新的MCR流变仪拥有最新的技术。EC运动技术，低摩擦的轴承以及专利的正交力传感器经过多年的优化可满足最高的流变要求。任何类型的或组合的流变测试，转动或振动模式，都可用MCR流变仪测量。该系统的模块化设计，可适合宽广的温度范围的装置和特定程序的应用。 |  |
| Mechanical Cupping Tester | BYK-Gardner USA | The BYK-Gardner Mechanical Cupping Tester is designed to test the elongation and deformability of lacquers and protective coatings applied to metal substrates. The punch is applied under pressure to the uncoated side of the test panel. The panel is held i...展开 The BYK-Gardner Mechanical Cupping Tester is designed to test the elongation and deformability of lacquers and protective coatings applied to metal substrates. The punch is applied under pressure to the uncoated side of the test panel. The panel is held in place by a clamping ring. Two test procedures can be performed the "Predetermined depth" (go/no go) or "Minimum depth required to cause failure". 收起 |  |
| MetaVue™ Non Contact Spectrophotometer | X-Rite Europe GmbH | MetaVue™ Non Contact Spectrophotometer is for wet sample retail paint color measurement. MetaVue™ revolutionizes the world of retail paint matching with its breakthrough non-contact imaging spectrophotometer technology. Say goodbye to the limitations and ...展开 MetaVue™ Non Contact Spectrophotometer is for wet sample retail paint color measurement. MetaVue™ revolutionizes the world of retail paint matching with its breakthrough non-contact imaging spectrophotometer technology. Say goodbye to the limitations and inaccuracies of traditional spectrophotometers when it comes to small, odd-shaped, and multi-colored samples. MetaVue™ raises the bar for precision and introduces a new level of accuracy, making paint matching easier and more reliable than ever before. 收起 |  |
| MetaVue™ VS3200 Non-Contact Benchtop Spectrophotometer | X-Rite Europe GmbH | MetaVue™ VS3200 Non-Contact Benchtop Spectrophotometer is for QC and formulation Measurement. The MetaVue™ VS3200 non-contact imaging spectrophotometer brings breakthrough versatility and accuracy to the measurement of wet and dry paints, plastics, cosmet...展开 MetaVue™ VS3200 Non-Contact Benchtop Spectrophotometer is for QC and formulation Measurement. The MetaVue™ VS3200 non-contact imaging spectrophotometer brings breakthrough versatility and accuracy to the measurement of wet and dry paints, plastics, cosmetics, and small and odd-shaped samples. 收起 |  |
| Micro-Gloss | BYK-Gardner USA | The Micro-Gloss has been the unsurpassed industry standard in gloss measurement for many years. It is the only gloss meter combining highest accuracy, ease of use and multiple functionality - essential for today's testing requirements. |  |
| Micro-Haze Plus | BYK-Gardner USA | The Micro-Haze Plus measures gloss and haze in one measurement procedure. This handy hazemeter is the ideal solution for measurement on finished products, for quality control in the production line and for technical service at the customer site. |  |
| Micro-Tri-Gloss | BYK-Gardner USA | Micro-Tri-Gloss combines 20°, 60°, 85° in one glossmeter - as handy as the one angle unit. Having three geometries in one unit allows you to be in compliance with international standards and to quickly recognize quality variations. |  |
| Micro-TRI-Gloss μ | BYK-Gardner USA | The micro-TRI-gloss µ measures both in seconds and at the same position. This saves time and is ideal for checks in the field. It simultaneously displays 20°, 60°, and 85° for high gloss to matte coatings. It has an automatic check of glossmeter calibrati...展开 The micro-TRI-gloss µ measures both in seconds and at the same position. This saves time and is ideal for checks in the field. It simultaneously displays 20°, 60°, and 85° for high gloss to matte coatings. It has an automatic check of glossmeter calibration standard and an easy, multilingual menu operation with scroll wheel. This instrument also has memory for 999 readings with name input and includes easy-link software for professional documentation in Excel®. 收起 |  |
| Micro-Wave-Scan | BYK-Gardner USA | Micro-Wave-Scan is used for Orange Peel and DOI measurement. Now you can measure Orange Peel and DOI on small and curved surfaces such as automotive add-on parts like bumpers, gas tank doors, mirror housings, door handles, decorative trim or motorcycle pa...展开 Micro-Wave-Scan is used for Orange Peel and DOI measurement. Now you can measure Orange Peel and DOI on small and curved surfaces such as automotive add-on parts like bumpers, gas tank doors, mirror housings, door handles, decorative trim or motorcycle parts. 收起 |  |
| NetProfiler Device Performance Platform | X-Rite Europe GmbH | NetProfiler Device Performance Platform is a cloud-based blend of software and color standards that makes it easy to validate and improve device performance, identify devices in need of service, and reduce variation between devices. |  |
| PantoneLIVE Production - For Plastic, Coatings, & Textile | X-Rite Europe GmbH | PantoneLIVE Production – Plastic, Coatings and Textile libraries gives color specifiers and manufacturers’ instant access to the most up to date Pantone colors for Plastic, Coatings and Textile applications in a digital format to ensure design intent is a...展开 PantoneLIVE Production – Plastic, Coatings and Textile libraries gives color specifiers and manufacturers’ instant access to the most up to date Pantone colors for Plastic, Coatings and Textile applications in a digital format to ensure design intent is achieved, and color is produced quickly and accurately. 收起 |  |
| PANTORA | X-Rite Europe GmbH | PANTORA desktop application is designed to simplify the management of a large volume of complex color and appearance data. PANTORA acts as the epicenter of appearance workflows, connecting digital material input sources with output destinations such as th...展开 PANTORA desktop application is designed to simplify the management of a large volume of complex color and appearance data. PANTORA acts as the epicenter of appearance workflows, connecting digital material input sources with output destinations such as third-party 3D rendering software and Product Lifecycle Management (PLM) Systems. 收起 |  |
| PARTICLE SIZER ANALYSETTE 28 IMAGESIZER | FRITSCH GmbH - Milling and Sizing | 分析方法：动态图像分析，样品类型：混悬剂和乳剂，分析：颗粒形状和尺寸，测量范围：1微米 - 2毫米，测量时间：̴1至3分钟（取决于形态学分析），曝光时间：80纳秒，每幅图像与大约为5兆像素，设备：5个镜片用于自动调整测量范围，评价：综合库，用于形态分析，适用范围：用于质量监控的实用工具。 |  |
| PARTICLE SIZER ANALYSETTE 28 IMAGETEC | FRITSCH GmbH - Milling and Sizing | 分析方法：动态图像分析，样品类型：混悬剂和乳剂，分析：颗粒形状和尺寸，测量范围：1微米 - 2毫米，测量时间：̴1至3分钟（取决于形态学分析），曝光时间：80纳秒，每幅图像与大约为5兆像素，设备：5个镜片用于自动调整测量范围，评价：综合库，用于形态分析，适用范围：用于质量监控的实用工具。 |  |
| Pencil Hardness Tester | BYK-Gardner USA | Pencil Hardness Tester is used to determine the resistance of coating materials or lacquers to scratch effects on the surface. This test is of particular value for furniture or vehicle lacquers, but is also a useful aid in the development of synthetic ...展开 Pencil Hardness Tester is used to determine the resistance of coating materials or lacquers to scratch effects on the surface. This test is of particular value for furniture or vehicle lacquers, but is also a useful aid in the development of synthetic resins or other film forming materials. Generally, scratch hardness is measured by moving a sharp object under a known pressure over the test surface. The result may either be the value of the pressure required to scratch through the test material if a scratching tool of constant hardness is used, or the hardness of the scratching tool is varied while constant pressure is applied. 收起 |  |
| Pendulum Hardness Tester | BYK-Gardner USA | The Pendulum Hardness Tester is a laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods. It has an automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respective...展开 The Pendulum Hardness Tester is a laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods. It has an automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respectively. This instrument also offers a digital counter and a selector switch for display in seconds or number of oscillations. 收起 |  |
| Pendulum Hardness Tester | TQC BV | The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates ...展开 The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates the hardness. TQC’s Pendulum Hardness Tester is a modular system. The instrument itself can be used for both the König and- Persoz method. 收起 |  |
| PosiTector DPM | BYK-Gardner USA | PosiTector DPM is used to measure and record climatic parameters including air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures, which is critial for determining condensation probabilit...展开 PosiTector DPM is used to measure and record climatic parameters including air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures, which is critial for determining condensation probability. This meter is ideal for surface preparation, as required by ISO 8502-4. 收起 |  |
| PosiTest Family Pull-Off Adhesion Test | BYK-Gardner USA | The PosiTest pull-off adhesion testers measure paint adhesion on metal, wood and other rigid substrates. This easy-to-use, reliable and versatile instrument uses hydraulic pressure and a revolutionary self-aligning dolly to ensure uniform pull distributio...展开 The PosiTest pull-off adhesion testers measure paint adhesion on metal, wood and other rigid substrates. This easy-to-use, reliable and versatile instrument uses hydraulic pressure and a revolutionary self-aligning dolly to ensure uniform pull distribution over the surface being tested, preventing a one-sided pull-off. This is done using a ring of small ball bearings to engage the articulating dolly head. There are two models available: the model AT-A Automatic Pull-Off Adhesion Tester and Model AT manual version. 收起 |  |
| Precision Microscope | BYK-Gardner USA | This precision microscope usually is used to measure indentation length. It allows for 20x magnification and has an inclusive light source. |  |
| Q-FOG Cyclic Corrosion Tester | Q-Lab, Inc. | Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforc...展开 Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforced fiberglass and there is no internal steel framework to corrode. They feature precise control of fog volume through the use of a variable speed peristaltic pump. Variable humidity control and shower capabilities are available as options. A remarkably simple user interface allows for easy user programming and operation. The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down. Purified water is required for proper operation. 收起 | |
| Q-SUN Xenon Test Chambers | Q-Lab, Inc. | Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different ...展开 Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different models: the tabletop Xe-1, and full-sized Xe-2 and Xe-3. Each air-cooled tester features Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet, a variety of standard sample holders and a remarkably simple user interface available in five languages. 收起 | |
| QUV Accelerated Weathering Tester | Q-Lab, Inc. | Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or we...展开 Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. With thousands of testers in service worldwide, the QUV tester is the world's most widely used weathering tester. QUV testers are available in four different models: QUV/basic, QUV/se, QUV/spray, and QUV/cw. Each air-cooled tester featured Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet and/or USB, a variety of standard sample holders, automatic fault recognition and alarms, automatic shut-down timer, and a remarkably simple user interface available in five languages. 收起 | |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheolabQC 是一款迄今最先进的质量控制流变仪，也可用于研发。结合了无与伦比的性能，易于操作以及稳健设计于一身。可执行从单点快速检查流动曲线到屈服点确定等一系列复杂的流变控制。 |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | 具有MCR流变仪性能的自定义流变测量仪器。其流变测量头可用于自动化操作或超过实验室流变仪要求的其他特殊测量目的。是工艺联合或建立自定义流变仪系统的完美方案。该模块装置包含一个配备有知名马达的测量头以及MCR系列的空气轴承，还有一个单独的控制单元。 |  |
| Rotational Viscometers | BYK-Gardner USA | Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; ...展开 Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; thus the sample viscosity. 收起 |  |
| Sample Cuvettes | BYK-Gardner USA | Square, rectangle and cylindrical cuvettes can be used for color measurement of liquids. Both precision as well as inexpensive disposable tubes are available. The precision cuvettes ensure reproducible results – even for critical solutions as clear as wat...展开 Square, rectangle and cylindrical cuvettes can be used for color measurement of liquids. Both precision as well as inexpensive disposable tubes are available. The precision cuvettes ensure reproducible results – even for critical solutions as clear as water. For daily QC disposable cuvettes save time and money. 收起 |  |
| Single Impact Tester ESP-10 | BYK-Gardner USA | Single Impact Tester ESP-10 is used to test chip resistance. Resistance to chipping of multi-coat systems is an important factor in automotive finishing. To protect auto body parts, a multi-coat system is applied for corrosion and mechanical stress. The c...展开 Single Impact Tester ESP-10 is used to test chip resistance. Resistance to chipping of multi-coat systems is an important factor in automotive finishing. To protect auto body parts, a multi-coat system is applied for corrosion and mechanical stress. The complete coating structure is decisive for its resistance to chipping. 收起 |  |
| SpectraLight QC | X-Rite Europe GmbH | SpectraLight QC is the ideal light booth to visually assess larger samples and evaluate special effects under all relevant lighting conditions. When used to evaluate color during design, specification, pre-production, production and quality assurance, the...展开 SpectraLight QC is the ideal light booth to visually assess larger samples and evaluate special effects under all relevant lighting conditions. When used to evaluate color during design, specification, pre-production, production and quality assurance, the SpectraLight QC can reduce waste due to rejects and rework, shorten time to market, and improve overall product quality. 收起 |  |
| SpectraVision Color Management | Datacolor | SpectraVision Color Management is part of the Datacolor SpectraVision solution. It enables manufactures to consistently perform repeatable color measurements for the multi-colored and/or textured materials. This solution combines an advanced hyperspectral...展开 SpectraVision Color Management is part of the Datacolor SpectraVision solution. It enables manufactures to consistently perform repeatable color measurements for the multi-colored and/or textured materials. This solution combines an advanced hyperspectral spectrophotometer with formulation and quality control software to measure, formulate, analyze, report, communicate, and visualize accurate color results. It is ideal for flooring and wall covering, wood, packaging and line printing, building material, paint and coatings and textile and apparel. 收起 |  |
| SpectraVision Flooring and Wall Covering | Datacolor | SpectraVision Flooring and Wall Covering is part of the Datacolor SpectraVision solution. It enables manufactures to consistently perform repeatable color measurements for the multi-colored and/or textured materials. This solution combines an advanced hyp...展开 SpectraVision Flooring and Wall Covering is part of the Datacolor SpectraVision solution. It enables manufactures to consistently perform repeatable color measurements for the multi-colored and/or textured materials. This solution combines an advanced hyperspectral spectrophotometer with formulation and quality control software to measure, formulate, analyze, report, communicate, and visualize accurate color results. It is ideal for flooring and wall covering, wood, packaging and line printing, building material, paint and coatings and textile and apparel. 收起 |  |
| SpectraVision Ink and Packaging | Datacolor | SpectraVision Ink and Packaging is part of the Datacolor SpectraVision solution. It enables manufactures to consistently perform repeatable color measurements for the multi-colored and/or textured materials. This solution combines an advanced hyperspectra...展开 SpectraVision Ink and Packaging is part of the Datacolor SpectraVision solution. It enables manufactures to consistently perform repeatable color measurements for the multi-colored and/or textured materials. This solution combines an advanced hyperspectral spectrophotometer with formulation and quality control software to measure, formulate, analyze, report, communicate, and visualize accurate color results. It is ideal for flooring and wall covering, wood, packaging and line printing, building material, paint and coatings and textile and apparel. 收起 |  |
| Spectro-Guide | BYK-Gardner USA | Spectro-Guide offers total appearance control - color and gloss in one unit. The overall appearance of a product is influenced by color and gloss. The spectro-guide spectrophotometer is unique as it measures both attributes simultaneously. |  |
| SPI Modified Impact Tester | BYK-Gardner USA | SPI Modified Impact Tester was developed in cooperation with the Society of the Plastics Industry (SPI) for evaluating impact resistance of rigid sheets of PVC (30-60 mils thick) and other plastics and materials exceeding the 160 inch-pounds limit of the ...展开 SPI Modified Impact Tester was developed in cooperation with the Society of the Plastics Industry (SPI) for evaluating impact resistance of rigid sheets of PVC (30-60 mils thick) and other plastics and materials exceeding the 160 inch-pounds limit of the Heavy-Duty Impact Tester. 收起 |  |
| Textile Color Hub | X-Rite Europe GmbH | Textile Color Hub helps with a traditional textile color approval workflow, brands and designers send a physical sample for suppliers to match. After creating multiple lab dips, the supplier ships the closest matches back to the brand for approval. If the...展开 Textile Color Hub helps with a traditional textile color approval workflow, brands and designers send a physical sample for suppliers to match. After creating multiple lab dips, the supplier ships the closest matches back to the brand for approval. If the brand is not satisfied with the sample, the process starts again, wasting additional materials, slowing time to market, and increasing the carbon footprint of the textile industry. 收起 |  |
| Viscosity Cups | BYK-Gardner USA | A flow cup, sometimes called an efflux cup or viscosity cup, is a simple gravity device that measures the timed flow of a known volume of liquid passing through an orifice located at the bottom of the shaped cup. |  |
| Viscosity Cups And Accessories | TQC BV | TQC Viscosity Flow Cups measure the consistency of paints, varnishes and other similar products. Each TQC viscosity cup is made under continuing quality control procedures and provided with an engraved unique serial number. The design of the cup and orif...展开 TQC Viscosity Flow Cups measure the consistency of paints, varnishes and other similar products. Each TQC viscosity cup is made under continuing quality control procedures and provided with an engraved unique serial number. The design of the cup and orifice eliminate hard to clean recesses. The inner dimensions are according specified standards. Since not all orifices are specified in the standards, additional orifices have been designed to comfort unspecified applications. 收起 |  |
| WASHABILITY AND ABRASION TEST | TQC BV | Universal machine for testing materials such as coatings, ink, textile, wood, plastics etc. for wear resistivity. Dry or liquid conventional brushes are moved across the surface, dry or with liquid added. Two simultaneous comparative tests are possible. T...展开 Universal machine for testing materials such as coatings, ink, textile, wood, plastics etc. for wear resistivity. Dry or liquid conventional brushes are moved across the surface, dry or with liquid added. Two simultaneous comparative tests are possible. This machine can be extended, and additional options are available. 收起 |  |
| Wave-Scan Dual | BYK-Gardner USA | Orange Peel and DOI measurement on high to semi gloss surfaces. The orange peel meter scans the optical profile of high gloss surfaces using a laser light source. An additional, infrared - high energy LED allows measuring the same structure spetrum (0.1 ...展开 Orange Peel and DOI measurement on high to semi gloss surfaces. The orange peel meter scans the optical profile of high gloss surfaces using a laser light source. An additional, infrared - high energy LED allows measuring the same structure spetrum (0.1 - 30 mm) on medium gloss surfaces. 收起 |  |
| Wave-Scan II | BYK-Gardner USA | The specialist for high gloss surfaces. Surface appearance changes with the size and distinctness of structures. The wave-scan II objectively evaluates orange peel as well as brilliance of topcoat finishes. |  |
| Wave-Scan Robotic | BYK-Gardner USA | Automatic appearance control of topcoat finish at the line. A stable running process is the key for uniform and consistent quality. Therefore, orange peel and DOI need to be measured on a routine basis in the production process and the measurement results...展开 Automatic appearance control of topcoat finish at the line. A stable running process is the key for uniform and consistent quality. Therefore, orange peel and DOI need to be measured on a routine basis in the production process and the measurement results shared with addon suppliers. The new wave-scan ROBOTIC allows automated appearance control as it is mounted on a robotic arm. 收起 |  |
| Wet Film Thickness Gages | BYK-Gardner USA | Wet Film Thickness Gage is offered for measuring wet film thickness. On one hand, film thickness influences the quality of a product; on the other hand, applying too much coating can be expensive. Depending on the application method, it is advisable to me...展开 Wet Film Thickness Gage is offered for measuring wet film thickness. On one hand, film thickness influences the quality of a product; on the other hand, applying too much coating can be expensive. Depending on the application method, it is advisable to measure wet film thickness. 收起 |  |
| X-Color QC | X-Rite Europe GmbH | X-Color QC tracks and controls color data for a variety of materials in automotive and other industries, with complete and real-time connectivity and controlled user access. |  |
| X-Rite Link Device Dashboard | X-Rite Europe GmbH | X-Rite Link Device Dashboard monitors and maintains visibility, and gains real-time insights into your fleet of X-Rite color measurement devices from one convenient online dashboard. |  |
