| A163 | Tianyi Chemical Engineering Material Co., Ltd. | A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300是一种气相二氧化硅，是ACEMATT® 消光剂产品家族的一种，具有很多激动人心的优点。ACEMATT® 3300也具有附加的优点，可为柔感涂料提供一种雅致的消光表面，可提升质感，也就是众所周知的柔软触感 | Request Sample |
| ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...展开 ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. 收起 | Request Sample |
| ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600是一种微颗粒状二氧化硅，作为特别有机聚合物使用，是专门为低光泽的辐射固化涂料而设计的。与传统的二氧化硅消光剂相比，ACEMATT® 3600对UV涂料的粘性影响较小。ACEMATT® 3600还具有高消光效率，在UV涂料系统中出色的透明度和易于加工等其他特点。 | Request Sample |
| ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | 赢创的新型消光剂ACEMATT®810：在过去的两年内，由很多客户测试和验证过其高消光效率，ACEMATT®810是赢创消光剂组合中不可或缺的一部分。ACEMATT®810作为未经处理的粗粒沉淀二氧化硅，由于高光效率高而区别于其他产品，并特别适合用于色漆系统。 | Request Sample |
| ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® HK 125是一种经济的未经处理的硅土，具有不同种类的粒径分布，适合一般用途 | Request Sample |
| ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® HK 400是一种通用型未经处理的消光剂。它适合所有不需要有机表面处理的应用 | Request Sample |
| ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440是一种非常高效的未经处理的消光（无光）助剂。ACEMATT® HK 440设计用于需要低光泽的涂料应用例如卷钢涂料、屋顶涂料、醇酸清漆 | Request Sample |
| ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
| ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 412是一种有机表面处理的易分散的消光剂，适合一般应用。该消光剂可获取异常杰出的表面特性，以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮效果，它特别适合用于透明涂料 | Request Sample |
| ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 500是一种经有机表面处理的易分散的消光剂，适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 520是一种易分散、经有机表面处理的消光剂，适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 607是一种易分散、经有机表面处理的消光剂，具有非常低的平均粒径。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
| ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
| ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® TS 100是一种热的未经处理的消光剂。ACEMATT® TS 100的特征是它的杰出的消光效率和透明度 | Request Sample |
| AD-1179 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AD-1179 is a silica based flatting agent suitable for use in water based topcoats for leather. It is used in leather topcoat or base coat applications to reduce or adjust gloss levels of the coating system. | |
| ATM1011 | Tianyi Chemical Engineering Material Co., Ltd. | ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...展开 ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. 收起 | |
| ATM9000 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...展开 ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution 收起 | |
| ATM9003 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...展开 ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. 收起 | |
| ATM9006 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...展开 ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution 收起 | |
| ATM9030 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...展开 ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution 收起 | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B520 | Tianyi Chemical Engineering Material Co., Ltd. | B520, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...展开 B520, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. 收起 | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B605 | Tianyi Chemical Engineering Material Co., Ltd. | B605 is an inorganic surface treated chemical that functions as a matting agent. Benefits include high excellent transparency, good matting efficiency, high recoatability and suspension properties and wonderful scrub-resistance. This chemical is especiall...展开 B605 is an inorganic surface treated chemical that functions as a matting agent. Benefits include high excellent transparency, good matting efficiency, high recoatability and suspension properties and wonderful scrub-resistance. This chemical is especially designed for high grade wooden lacquer systems, plastic and rubber coating systems. 收起 | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...展开 B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. 收起 | |
| B609 | Tianyi Chemical Engineering Material Co., Ltd. | B609 is an organic surface treated chemical that functions as a matting agent. Benefits include excellent transparency, good matting efficiency, high recoatability and suspension properties, and wonderful scratch resistance.This chemical is especially des...展开 B609 is an organic surface treated chemical that functions as a matting agent. Benefits include excellent transparency, good matting efficiency, high recoatability and suspension properties, and wonderful scratch resistance.This chemical is especially designed for high grade wooden lacquer systems, plastic and rubber coating systems. 收起 | |
| B616 | Tianyi Chemical Engineering Material Co., Ltd. | B616, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...展开 B616, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. 收起 | |
| B618 | Tianyi Chemical Engineering Material Co., Ltd. | B618, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...展开 B618, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. 收起 | |
| B810 | Tianyi Chemical Engineering Material Co., Ltd. | B810, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a ...展开 B810, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a 5% solvent solution. 收起 | |
| B812 | Tianyi Chemical Engineering Material Co., Ltd. | B812, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.2 and 6.5 in a ...展开 B812, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.2 and 6.5 in a 5% solvent solution. 收起 | |
| B814 | Tianyi Chemical Engineering Material Co., Ltd. | B814, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a ...展开 B814, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a 5% solvent solution. 收起 | |
| B816 | Tianyi Chemical Engineering Material Co., Ltd. | B816, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a ...展开 B816, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 6.0 and 6.5 in a 5% solvent solution. 收起 | |
| B818 | Tianyi Chemical Engineering Material Co., Ltd. | B818, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a ...展开 B818, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a 5% solvent solution. 收起 | |
| B820 | Tianyi Chemical Engineering Material Co., Ltd. | B820, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a ...展开 B820, in the form of a dry, white, micronized powder, is a matting agent designed for use in coil coating applications. This product disperses easily, and has an amorphous form with a high specific surface area. Its pH value is between 5.0 and 6.0 in a 5% solvent solution. 收起 | |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Borchi® Gel Thixo 2 | OMG Borchers GmbH | 用于主要为非极性或极性较低的含溶剂型油漆的增稠剂。用于有光泽、丝光面漆和无光泽油漆的精细白色粉末。适用于干性油、醇酸树脂、环氧树脂酯等体系的主体树脂。 | |
| BS-287 | Quaker Color (a Division of McAdoo & Allen, Inc.) | BS-287, in the form of a translucent liquid, is silica based flatting agent with a very fine particle size. It is used in leather topcoat or base coat applications to reduce or adjust gloss levels of the coating system. | |
| BV110 | Tianyi Chemical Engineering Material Co., Ltd. | BV110, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and r...展开 BV110, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and recoatable. Its pH value is between 6.0 and 7.0. 收起 | |
| BV2 | Tianyi Chemical Engineering Material Co., Ltd. | BV2, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and rec...展开 BV2, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and recoatable. Its pH value is between 6.0 and 7.0. 收起 | |
| BV805 | Tianyi Chemical Engineering Material Co., Ltd. | BV805, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and r...展开 BV805, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and recoatable. Its pH value is between 6.0 and 7.0. 收起 | |
| BV809 | Tianyi Chemical Engineering Material Co., Ltd. | BV809, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and r...展开 BV809, in the form of a dry, white, micronized powder, is a matting agent that can be used in water-based and solvent based coatings, wooden coatings, and industrial paints. This product possesses high dispersing capacity, and is highly transparent and recoatable. Its pH value is between 6.0 and 7.0. 收起 | |
| BW300 | Tianyi Chemical Engineering Material Co., Ltd. | BW300, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0. | |
| BW330 | Tianyi Chemical Engineering Material Co., Ltd. | BW330, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0. | |
| BYK-3938 P | BYK | BYK-3938 P is a powdered post-add surface additive for the matting of powder coatings. | |
| Calcined Kaolin for Ceramic | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Ceramic是一种用于陶瓷釉的理想材料，有高亮度和低325网筛残留物。它具有高纯度铝含量，可以显著改善釉和主体的性能。它具有更好的烧结性能，因为其原材料是煤系高岭土原矿与天然高岭土原矿混合而成。 | |
| Calcined Kaolin for Medical Rubber Plug | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Medical Rubber具有高亮度和低325网筛残余。由于它的原材料纯度很高，其杂质和重金属含量很低。由于在丁基橡胶中具有合理的粒度分布，良好的分散性和补强性能，它可以改善丁基橡胶产品的加工性能。 | |
| Calcined Kaolin for Paint | Golden Bright Enterprise Co. Ltd. | 用于涂料的煅烧高岭土与其它相似产品相比具有高亮度和更好的不透明性。它有出色的分散性和低吸油量，可以增加油漆填料。这款产品可以改善油漆的耐刮擦性，耐磨性和耐候性。 | |
| Calcined Kaolin for Paint 901 | Golden Bright Enterprise Co. Ltd. | 与其它同类产品相比，Calcined Kaolin for Paint 901具有更高的亮度和更好的不透明性。它具有出色的分散性和低油吸收量，还可以增加油漆中填料的含量。这款产品可以改善涂料的耐磨损性和耐候性。 | |
| Calcined Kaolin for Rubber | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Rubber由有合理粒度分布的小颗粒组成，因此可以改善在橡胶应用中的强度和分散性。由于含有高纯度的原料，它对大多数酸和碱在环境温度下有惰性，并为橡胶制品提供出色的化学稳定性。这款产品具有适当的pH值，因此更适合用于橡胶加工系统。它可以用于改善橡胶加工过程中的反应时间。 | |
| Calcined Kaolin for Tannin | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Tannin是高精度高岭土经过超过1000° C煅烧获得的。在煅烧过程中会发生化学、形态和矿相变化。它专门用于单宁。它具有高活性，更好的单宁吸收和采集效果。这款产品还具有良好的分散性，可以有效地改善单宁产品的效率。由于它的杂质含量很低，可以明显改善单宁产品的纯度。它有稳定的pH值，更适合单宁产品的反应条件。 | |
| Calcined Kaolin for Ultramarine | Golden Bright Enterprise Co. Ltd. | Calcined Kaolin for Ultramarine是在可控温度下加热水分馏的高岭土获得的脱羟基硅酸铝。它专门设计用于群青产品。由于它具有高纯度，可以大幅提高群青产品的耐酸性。由于有更好的偏高岭土活性，它也有助于改善着色力。这款产品的原料是高岭土原矿石与天然高岭土矿石混合而成，因而有更好的烧结性。 | |
| CERAFLOUR® 1000 | BYK | 以具有类蜡配方的可再生资源为基础的可降解聚合物，可以提高哑光效果及触感。 | |
| CERAFLOUR® 1001 | BYK | CERAFLOUR® 1001 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining optimal transparency. ...展开 CERAFLOUR® 1001 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining optimal transparency. It creates a soft feel effect. 收起 | |
| CERAFLOUR® 1002 | BYK | CERAFLOUR® 1002 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining high transparency. It ...展开 CERAFLOUR® 1002 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining high transparency. It creates a soft feel effect and a slightly textured surface. 收起 | |
| CERAFLOUR® 913 | BYK | 它是一种微粉蜡，是水性或溶剂型涂料的表面纹理剂。推荐用于工业漆和木器漆中，它可以为涂膜提供均一的超细纹理，同时使涂膜手感柔软，而且具有良好的消光效果 | |
| CERAFLOUR® 920 | BYK | 微粉化有机聚合物，用于水性和溶剂型油漆体系的去光。 | |
| CERAFLOUR® 950 For Powder | BYK | 一种微粉化蜡，用来提高粉末涂料的表面特性。特别是提高抗刮擦性和去光。 | |
| CERAFLOUR® 970 | BYK | 微粉化聚丙烯蜡，用于提高溶剂型油漆和粉末涂料的表面性能。 | |
| CERAMAT® 248 | BYK | 溶剂型装饰涂料表面保护用具消光性的水性蜡分散体。 | |
| CERAMAT® 258 | BYK | 一种腊分散体，用于改善溶剂型木器和工业涂料的表面特性，特别是提高抗刮擦性和去光。 | |
| CRAYVALLAC® EF 30P | Arkema Rheology & Specialty Additives | CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALL...展开 CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings. 收起 | Request Sample |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...展开 CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. 收起 | Request Sample |
| CRAYVALLAC® WN-1150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1150 is used to control gloss between 30 – 60% for epoxy/polyester hybrid, HAA and TGIC based polyester powder coatings. It shows no effect on weather ability or physical properties. | Request Sample |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...展开 CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. 收起 | Request Sample |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...展开 CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. 收起 | Request Sample |
| CRAYVALLAC® WN-1875 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly us...展开 CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product. 收起 | Request Sample |
| Deuterol Paraffindispersion | Deuteron | Deuterol Paraffindispersion is used as a matting additive in water dilutable polyester systems. It produces a continuous uniform paraffin film in water dilutable systems. Deuterol Paraffindispersion has been designed to be used in water dilutable polye...展开 Deuterol Paraffindispersion is used as a matting additive in water dilutable polyester systems. It produces a continuous uniform paraffin film in water dilutable systems. Deuterol Paraffindispersion has been designed to be used in water dilutable polyester systems for coating of wood surfaces. It can also be used in other water dilutable systems. Effectiveness and compatibility need to be checked for each application. 收起 | Request Sample |
| Deuteron MK | Deuteron | Deuteron MK is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueou...展开 Deuteron MK is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. 收起 | Request Sample |
| Deuteron MK-F | Deuteron | Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aque...展开 Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. 收起 | Request Sample |
| Deuteron MK-F6 | Deuteron | Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqu...展开 Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. 收起 | Request Sample |
| Deuteron MM 659 | Deuteron | Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing la...展开 Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing lacquers is not possible due to the favorable composition of Deuteron MM 659. The obtained coating surfaces show excellent resistance regarding burnishing and mar resistance. The use of Deuteron MM 659 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. A reaction between matting agent and lacquer system and therefore a spoiling of the storage stability has not been noticed. 收起 | Request Sample |
| Deuteron MM 669 | Deuteron | Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders ...展开 Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders no cloudiness has been noticed. The surfaces of coatings show excellent resistance to burnishing and mar resistance. Deuteron MM 669 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. 收起 | Request Sample |
| Deuteron MM 677 | Deuteron | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and furniture lacquers, printing inks and industrial finishes (air-drying and stoving enamels). ...展开 Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and furniture lacquers, printing inks and industrial finishes (air-drying and stoving enamels). In comparison with powdery matting agents Deuteron MM 677 particularly offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. 收起 | Request Sample |
| Deuteron MM 680 | Deuteron | Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems. Deuteron MM 680 is a mixture of finest-groun...展开 Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems. Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing. Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. 收起 | Request Sample |
| Deuteron MM 682 | Deuteron | Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers. ...展开 Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers. The matting effect induced with Deuteron MM 682 is highly resistant to mechanical influences ("polishing" or abrasion). Deuteron MM 682 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. 收起 | Request Sample |
| Deuteron MM 684 | Deuteron | Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers. ...展开 Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers. Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing. Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. 收起 | Request Sample |
| Deuteron PMH C | Deuteron | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings. Deuteron PMH C can be used as a matt...展开 Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, radiation curing varnishes with the additional use of SiO2. With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. 收起 | Request Sample |
| Deuteron PMH F | Deuteron | Deuteron PMH F is a fine micronized, pure thermoset with a compact particle structure. Due to the fineness the products can be used as a matting additives in many applications in varnishes and coatings. | Request Sample |
| Deuteron PMH M | Deuteron | Deuteron PMH M is a fine micronized, pure thermoset with a compact particle structure. Due to the fineness the products can be used as a matting additives in many applications in varnishes and coatings. | Request Sample |
| Deuteron SO 100 | Deuteron | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...展开 Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the recoatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. 收起 | Request Sample |
| Deuteron SO 300 | Deuteron | Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and...展开 Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is temperature resistant up to 160°C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the recoatability. In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. 收起 | Request Sample |
| Deuteron SO 302 | Deuteron | Deuteron SO 302 is a dispersion of an elastomer in water corresponding to Deuteron SO 300, however with considerably larger particle size distribution. It lends the coating a rough, soft-touch-surface. It also acts as a matting agent. | Request Sample |
| Deuteron SO 500 | Deuteron | Deuteron SO 500 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the syst...展开 Deuteron SO 500 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the recoatability. In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is intended for all solvent-based coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. 收起 | Request Sample |
| Deuteron SO 510 | Deuteron | Deuteron SO 510 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the syst...展开 Deuteron SO 510 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. 收起 | Request Sample |
| Deuteron UV RM10 | Deuteron | Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness...展开 Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness. 收起 | Request Sample |
| Deuteron UV RM15 | Deuteron | Deuteron UV RM15 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. | Request Sample |
| Deuteron UV RM17 | Deuteron | Deuteron UV RM17 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. | Request Sample |
| Deuteron UV RM19 | Deuteron | Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-prod...展开 Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-products. 收起 | Request Sample |
| Deuteron UV RMP | Deuteron | Deuteron UV RMP is primarily suited for matting radical curing 100% UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light d...展开 Deuteron UV RMP is primarily suited for matting radical curing 100% UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light diffraction. 收起 | Request Sample |
| Deuteron UV RS20 | Deuteron | Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties. It is ideal for use in radically curing UV coatings and prin...展开 Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties. It is ideal for use in radically curing UV coatings and printing inks, in particular for solvent-free systems. 收起 | Request Sample |
| Deuteron WAX A | Deuteron | Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion. Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal...展开 Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion. Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent. Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. 收起 | Request Sample |
| Deuteron WAX MPO | Deuteron | Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion. The use of Deuteron-WAX MPO also leads to excellent results in powder coatings. The dispersed wax shows resistance to set...展开 Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion. The use of Deuteron-WAX MPO also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. 收起 | Request Sample |
| Deuteron WAX PP | Deuteron | Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-W...展开 Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. 收起 | Request Sample |
