| ADDITOL® P 824 | Allnex | 流平促进母料，用于粉末涂料。在户外耐候羟基聚酯基体中含有15％的活性剂。用于要求光泽和流平的应用场合 | Request Sample |
| ADDITOL® P 891 | Allnex | ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...展开 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. 收起 | Request Sample |
| ADDITOL® P 896 | Allnex | 流平促进母料，适用于有色粉末涂料。 | Request Sample |
| ADDITOL® VXL 4930 N | Allnex | ADDITOL® VXL 4930 N -flow/leveling/levelling- is a modified silicone for improvement of levelling and surface smoothness of solvent containing and aqueous paints. | Request Sample |
| ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
| ADDITOL® VXW 6503 N | Allnex | ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling wi...展开 ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling without foam stabilisation. 收起 | Request Sample |
| ADDITOL® XL 109/50LG | Allnex | 酚类油漆添加剂 | Request Sample |
| ADDITOL® XL 121 N | Allnex | ADDITOL® XL 121 N -flow/leveling/levelling- is a paint additive to enhance mar resistance and levelling of air drying and stoving paints, particularly for silicone modified air drying and stoving alkyd resins. | Request Sample |
| ADDITOL® XL 123 N | Allnex | 流平剂和消泡剂，基于改性硅油，用于自干漆和烤漆体系 | Request Sample |
| ADDITOL® XL 480 | Allnex | 流平剂，不含硅，胺树脂改性的丙烯酸共聚物 | Request Sample |
| ADDITOL® XL 490 | Allnex | 流平和抗凹陷助剂，用于提高漆膜表面质量，不含硅添加剂 | Request Sample |
| ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
| ADDITOL® XW 395 | Allnex | 流平，润湿和防发花助剂，用于水性油漆体系 | Request Sample |
| ADDITOL® XW 6580 | Allnex | ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam...展开 ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam stabilization. 收起 | Request Sample |
| AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
| AEROXIDE® Alu C 805 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® Alu C 805是一种非常细粒径的热解氧化铝，经辛基硅烷处理。它可用于粉末涂料和调色剂中改善流动性，用于塑料粉末，如PVC中，阻止粘附和结块，保护粉末防止潮湿 | Request Sample |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...展开 AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. 收起 | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...展开 AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. 收起 | |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam sta...展开 AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. 收起 | |
| AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration ...展开 AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. 收起 | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...展开 AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. 收起 | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat ...展开 AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. 收起 | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. I...展开 AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. 收起 | |
| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...展开 ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. 收起 | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展开 BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. 收起 | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...展开 BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. 收起 | |
| BYK®-302 FOR INKS | BYK | 有机硅表面助剂，可中等程度的降低表面张力。可用于所有水性、溶剂型和无溶剂印刷油墨 | |
| BYK®-331 FOR INKS | BYK | 有机硅表面助剂，可中等程度的降低表面张力。可用于所有水性、溶剂型和无溶剂印刷油墨 | |
| BYK®-345 FOR INKS | BYK | 有机硅表面活性剂，用于水性油墨体系，可降低表面张力。是BYK® 346的无溶剂版本；具有出色的基材润湿性能和流平性能。无泡沫稳定作用，不会增加表面滑爽度，不影响重涂性能 | |
| BYK®-346 FOR INKS | BYK | 有机硅表面活性剂，是用以提高水性体系基材润湿性的标准添加剂 | |
| BYK®-347 FOR INKS | BYK | 有机硅表面活性剂，可提高水性印刷油墨的基材润湿性 | |
| BYK®-348 FOR INKS | BYK | 有机硅表面活性剂，用于水性油墨体系，可大大降低表面张力。可改善基材润湿性和流平性。不会稳定泡沫，不会增加表面滑爽度，也不会损害重涂性能 | |
| BYK®-354 FOR INKS | BYK | ||
| BYK®-361 N FOR INKS | BYK | 不含溶剂的丙烯酸流平剂，用于高品质、有色和无色的印刷油墨中 | |
| BYK®-377 FOR INKS | BYK | 有机硅表面助剂，低添加量时，即可改善100%无溶剂紫外固化印刷油墨和套印清漆的基材润湿和流平性能 | |
| BYK®-381 FOR INKS | BYK | 丙烯酸流平剂，用于印刷油墨 | |
| BYK®-UV 3500 FOR INKS | BYK | 表面添加剂，用于辐射固化体系，具有高表面滑爽度，以及改进的流平性能和基材润湿性能 | |
| BYK®-UV 3510 FOR INKS | BYK | 表面添加剂，用于辐射固化体系，尤其推荐用于辐射固化套印清漆，低添加量时即可改善基材润湿性能和流平性能 | |
| BYK®-UV 3530 FOR INKS | BYK | 表面添加剂，用于辐射固化体系，可改进流平性能 | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| Digicer TU 203 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect levelin...展开 Digicer TU 203, in the form of a yellow liquid, is a mix of block polymers. This product is a levelling agent for glazes to be applied after decoration by digital printing technology. The hydrophobic character of inks often do not permit perfect leveling of the glaze on the tile surface after the decoration by digital printing technology. This product in particular avoids repelling water. 收起 | |
| DISPERBYK®-168 FOR INKS | BYK | ||
| DISPERBYK®-182 FOR INKS | BYK | ||
| Dynax DX4000 | Dynax Corporation | Dynax DX4000 is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 35% active ingredients. Dynax DX4000 imparts enhanced spreading, wetting, and leveling properties to wa...展开 Dynax DX4000 is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 35% active ingredients. Dynax DX4000 imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and floor polishes. 收起 | |
| Dynax DX4005N | Dynax Corporation | Dynax DX4005N is a yellow-colored, slightly anionic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and fl...展开 Dynax DX4005N is a yellow-colored, slightly anionic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and floor polishes. 收起 | |
| Dynax DX4010N | Dynax Corporation | Dynax DX4010N is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 45% active ingredients. Dynax DX4010N imparts enhanced spreading, wetting, and leveling properties to w...展开 Dynax DX4010N is a yellow-colored, slightly cationic, water-based, non-flammable fluorosurfactant in a clear liquid form. This product is comprised of 45% active ingredients. Dynax DX4010N imparts enhanced spreading, wetting, and leveling properties to water-based coating systems, such as inks, paints, and floor polishes. 收起 | |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd F-1是一种用于溶剂型涂料的一般用途的流动性、流平和抗缩孔添加剂。它可以降低涂料配方的表面张力，从而提高基材的润湿性，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd F-100是一种流动性和润湿添加剂，与溶剂型涂料的相容性高。它可以降低配方的表面张力，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd F-101是一种流平添加剂，适用于包括UV涂料在内的极性体系。它可以降低非溶剂型和溶剂型涂料的表面张力，从而提高基材的润湿性，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd F-102是一种流动性和流平添加剂，用于溶剂型体系时具有防泡沫的特性。由于其分子量和化学组成的关系，Dynoadd F-102在流动性和消泡沫性方面做到了良好的平衡，广泛用于各种配方。 | |
| Dynoadd® F-106 | Dynoadd by Dynea | 透明涂料的防缩孔助剂，具有高DOI | |
| Dynoadd® F-113 | Dynoadd by Dynea | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...展开 Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. 收起 | |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd F-300是一种可以与食品接触的流动性和润湿添加剂，适用于溶剂型涂料。它能够降低配方的表面张力，避免缩孔、收缩、桔皮和针孔等表面缺陷。 | |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd F-3B是一种可以与食品接触的流动性和抗缩孔添加剂，适用于溶剂型涂料。它能够降低配方的表面张力，提高基材的润湿性，避免缩孔、收缩和针孔等表面缺陷。 | |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd F-404是一种硅氧烷改性流动性和流平添加剂，可以有效地控制溶剂型涂料的表面张力，用于喷涂涂料时具有出色的流动性、流平性和抗过喷缩孔的性能。 | |
| Dynoadd® F-409 | Dynoadd by Dynea | 用于紫外固化体系的流平、流动和光泽助剂 | |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...展开 Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. 收起 | |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...展开 Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. 收起 | |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd F-601是一种用于水性配方的基材润湿和流平添加剂。添加Dynoadd F-601后可以提高基材的润湿性、流动性和流平性。避免或最大限度地减少缩孔、针孔、白点和其它表面缺陷。 | |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...展开 Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. 收起 | |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...展开 Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. 收起 | |
| Dynoadd® F-701B | Dynoadd by Dynea | DYNOADD® F -701B是一种高效聚合物添加剂，对空气释放和抗气泡特别有效。它可控制溶剂型涂料的表面张力。少量添加即有助于提高流动性，减少表面缺陷，例如缩孔、桔皮和针孔。该产品与许多蜡乳液具有良好的相容性，用于高蜡含量涂料中具有良好的性能。DYNOADD® F -701B可以结合Dynoadd®流动添加剂，特别是Dynoadd ®F -101使用。 | |
| Dynoadd® F-711 | Dynoadd by Dynea | 消泡剂和脱气剂，适用于修补漆和一般工业漆 | |
| Dynoadd® F-800 | Dynoadd by Dynea | DYNOADD® F -800是一种多官能团、附着力促进流动和流平剂。它改性涂料表面，大大改善对聚氨酯泡的吸附。作为一种有效的流动和流平添加剂，该产品可控制涂层表面张力，从而消除表面缺陷如橘皮、缩孔和针孔。DYNOADD® F -800对基材和颜料润湿上也有积极作用。 | |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...展开 Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. 收起 | |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...展开 Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. 收起 | |
| Eastman™ Cellulose Acetate Butyrate (CAB-531-1) | Eastman Chemical B.V. | Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resi...展开 Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman™ CAB-531-1 esters are soluble in a wide range of solvents. It is a flexible resin requiring lower plasticizer modification. Eastman™ CAB-531-1 is used for food contact applications, nail care, and coatings for automotive plastics. 收起 | |
| Eastman Solus™ 2100 | Eastman Chemical B.V. | Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sandi...展开 Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sanding, excellent anti-sag behavior, faster dry to touch time, improved gloss, and wider window of polishability. 收起 | |
| EDAPLAN® LA 403 | Munzing Chemie | EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free,...展开 EDAPLAN® LA 403 is a brown liquid suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems. Advantages of using EDAPLAN® LA 403 include improved gloss and reduced haze, silicone-free, solvent-free, water resistance is not affected, prevents surface defects, and reduction of foam tendency. Main application areas include chemical curing systems, e.g. wood coatings, automotive, OEM and repair coatings, industrial coatings, 2K-systems, and printing inks and overprint varnishes. 收起 | |
| EDAPLAN® LA 452 | Munzing Chemie | EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA ...展开 EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems. Advantages of using EDAPLAN® LA 452 include gloss improvement and reduction of haze, prevention of surface defects like craters and Bénard cells, improvement of substrate wetting, no increase in foam, and good recoatability. Main application areas include architectural coatings, wood and furniture coatings, automotive OEM and repair coatings, industrial coatings, and printing inks and overprint varnishes. 收起 | |
| HB-132 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...展开 HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. 收起 | |
| HB-135 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...展开 HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. 收起 | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...展开 HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. 收起 | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...展开 HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. 收起 | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...展开 HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. 收起 | |
| HB-630 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-630 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good surface chemistry & thixotropic stability and improved homogeneity & free-flow characteristics. This product is d...展开 HB-630 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good surface chemistry & thixotropic stability and improved homogeneity & free-flow characteristics. This product is designed for use in coatings, inks, and printing toners. 收起 | |
| HEXAFOR™ 612 | Maflon SRL | HEXAFOR™ 612 is an anionic pale yellow to amber clear liquid. It is used as a fluorinated surfactant to improve levelling and wetting and to reduce surface tension at low concentrations. HEXAFOR™ 612 can be used in paint, varnish, ink, wax, polish, and ad...展开 HEXAFOR™ 612 is an anionic pale yellow to amber clear liquid. It is used as a fluorinated surfactant to improve levelling and wetting and to reduce surface tension at low concentrations. HEXAFOR™ 612 can be used in paint, varnish, ink, wax, polish, and adhesive applications. 收起 | |
| HEXAFOR™ 643 | Maflon SRL | HEXAFOR™ 643 is a non-ionic yellow to amber, viscous liquid. It is used as a fluorosurfactant to improve wetting and levelling, and reduce surface tension and cratering. HEXAFOR™ 643 can be used in paint, coating, wax, polish, adhesive, caulk, and graphic...展开 HEXAFOR™ 643 is a non-ionic yellow to amber, viscous liquid. It is used as a fluorosurfactant to improve wetting and levelling, and reduce surface tension and cratering. HEXAFOR™ 643 can be used in paint, coating, wax, polish, adhesive, caulk, and graphic art applications. 收起 | |
| HEXAFOR™ 643-D | Maflon SRL | HEXAFOR™ 643-D is a yellow to light yellow liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce orange peel effect and to increase wetting, spreading, and levelling. HEXAFOR™ 643-D can be used in paint, coating, adhesiv...展开 HEXAFOR™ 643-D is a yellow to light yellow liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce orange peel effect and to increase wetting, spreading, and levelling. HEXAFOR™ 643-D can be used in paint, coating, adhesive, caulk, and graphic art applications. 收起 | |
| HEXAFOR™ 644 | Maflon SRL | HEXAFOR™ 644 is a yellow to amber viscous liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce surface and interface tension, improve wetting and levelling, and reduce cratering. HEXAFOR™ 644 can be used for paint, coat...展开 HEXAFOR™ 644 is a yellow to amber viscous liquid that is non-ionic in nature. It is used as a polymeric fluorosurfactant to reduce surface and interface tension, improve wetting and levelling, and reduce cratering. HEXAFOR™ 644 can be used for paint, coating, wax, polish, adhesive, caulk, and graphic art applications. 收起 | |
| HEXAFOR™ 670 | Maflon SRL | HEXAFOR™ 670 is a non-ionic colorless to pale yellow, viscous liquid. It is used as a fluorosurfactant to improve wetting, levelling, antisoiling, antifogging, and UV resistance and to reduce surface tension at low concentrations. HEXAFOR™ 670 can be used...展开 HEXAFOR™ 670 is a non-ionic colorless to pale yellow, viscous liquid. It is used as a fluorosurfactant to improve wetting, levelling, antisoiling, antifogging, and UV resistance and to reduce surface tension at low concentrations. HEXAFOR™ 670 can be used in paint, coating, ink, wax, polish, and adhesive applications. 收起 | |
| HEXAFOR™ 672 | Maflon SRL | HEXAFOR™ 672 is a colorless to pale yellow clear liquid that is non-ionic in nature. It is used as a a fluorosurfactant to reduce surface tension. HEXAFOR™ 672 can be used in paint, coating, ink, wax, polish, graphic art, and adhesive applications. | |
| HEXAFOR™ 675 | Maflon SRL | HEXAFOR™ 675 is a non-ionic clear liquid. It is used as a fluorosurfactant to improve wetting and reduce surface tension at low concentrations. HEXAFOR™ 675 can be used in paint, coating, ink, wax, polish, and adhesive applications. | |
| HEXAFOR™ 678 | Maflon SRL | HEXAFOR™ 678 is a non-ionic colorless to pale yellow liquid. It is used as a fluorosurfactant to improve wetting and levelling and to reduce surface tension at low concentrations. HEXAFOR™ 678 can be used for paint, coating, ink, wax, polish, graphic art,...展开 HEXAFOR™ 678 is a non-ionic colorless to pale yellow liquid. It is used as a fluorosurfactant to improve wetting and levelling and to reduce surface tension at low concentrations. HEXAFOR™ 678 can be used for paint, coating, ink, wax, polish, graphic art, and adhesive applications. 收起 | |
| HEXAFOR™ 678-D | Maflon SRL | HEXAFOR™ 678-D is a non-ionic colorless to pale yellow clear liquid. It is used as a fluorosurfactant to improve wetting and levelling and reduce surface tension at low concentrations. HEXAFOR™ 678-D can be used in paint, coating, ink, wax, polish, graphi...展开 HEXAFOR™ 678-D is a non-ionic colorless to pale yellow clear liquid. It is used as a fluorosurfactant to improve wetting and levelling and reduce surface tension at low concentrations. HEXAFOR™ 678-D can be used in paint, coating, ink, wax, polish, graphic art, and adhesive applications. 收起 | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...展开 HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展开 HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...展开 HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. 收起 | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...展开 Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. 收起 | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| METOLAT® 288 | Munzing Chemie | METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling,...展开 METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling, especially in low viscosity systems. Main applications include overprint varnishes, container coatings (ext.), printing inks, wood coatings, and adhesives. 收起 | |
| MODAFLOW® 2100 | Allnex | 丙烯酸流平改性剂，无硅添加剂。用于改善流平性，减少针孔、鱼眼、凹陷和桔皮，改善基材润湿性，帮助脱气，促进颜料分散 | Request Sample |
