| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...展开 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. 收起 | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...展开 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 收起 | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...展开 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 收起 | |
| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| AFCONA - 1101 | AFCONA Additives Sdn Bhd | AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. ...展开 AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. AFCONA - 1101 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. 收起 | |
| AFCONA - 1102 | AFCONA Additives Sdn Bhd | AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as ...展开 AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. 收起 | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Araldite® GY 250 | Jubail Chemical Industries Co. | Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-fre...展开 Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-free coatings, self-leveling and mortar, flooring screeds, toweling compounds etc. when cured with polyamines, polyamidoamines or their adducts. 收起 | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...展开 BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...展开 BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and dryin...展开 BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. 收起 | |
| BENASOL FL 40 | Benasedo | BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for seale...展开 BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for sealers, matt and semi-glossy paints employed in building and costruction industries endowed with good outdoor resistance properties. 收起 | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7380 | Benasedo | BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and f...展开 BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance in compliance with the CE 2004 – 42 requirements for the VOC reduction . 收起 | |
| BENASOL HS 75 | Benasedo | BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured a...展开 BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 753 | Benasedo | BENASOL HS 753 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENASOL HS 86 | Benasedo | BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ai...展开 BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL S 60 | Benasedo | BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades...展开 BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades architectural enamels for interior and exterior, as well as for marine paints. 收起 | |
| BENESTER G22 | Benasedo | BENESTER G22 is a styrene free unsaturated polyester resins crosslinkable through “ Redox “ systems or UV lamps. It allows to obtain paints with very high gloss levels, hardness and similar pot life to the conventional ones diluted with Styrene. | |
| Brasmide RW 100 | SGS Polimeros | Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished...展开 Brasmide RW 100 is a polyamide resin in aqueous solution of 65% non-volatiles. It has emulsionability with epoxy resin, dispensing the need of emulsifiers and additional surfactants. Brasmide RW 100 is used with epoxy resins in the formulation of finished inks, primers, floor coverings, and industrial maintenance inks. 收起 | |
| Brasmine C 71 | SGS Polimeros | Brasmine C 71 is a cycloaliphatic curing agent with low viscosity. It reacts at ambient temperatures with solid or liquid epoxy resins resulting in a polymer with chemical resistance, UV resistance, fluidity, and leveling. Brasmine C 71 is used in high so...展开 Brasmine C 71 is a cycloaliphatic curing agent with low viscosity. It reacts at ambient temperatures with solid or liquid epoxy resins resulting in a polymer with chemical resistance, UV resistance, fluidity, and leveling. Brasmine C 71 is used in high solids coatings and self leveling floor finishing. 收起 | |
| BYD2610 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water....展开 BYD2610, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in weatherproof exterior wall coatings and high-quality interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| BYD2620 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and wat...展开 BYD2620, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in high quality exterior wall coatings and stain-resistant interior wall coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| BYD2630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH...展开 BYD2630, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in elastic interior or exterior wall coatings, and in gigging coatings. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| BYD3053 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant....展开 BYD3053, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in alkaline-resistant exterior wall coatings and sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3064 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cemen...展开 BYD3064, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in sealer primers for construction applications. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3510 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...展开 BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3520 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD3910 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color...展开 BYD3910, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in exterior wall coatings, stone coatings, and textured coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3928 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...展开 BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 收起 | |
| BYD3998 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3998, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolmer that can be used in exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD5110 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH val...展开 BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH value is 4.0 +/- 1.0. 收起 | |
| BYD5120 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5120, in the form of a white, waterborne anionic emulsion, is a vinyl versatates copolymer that can be used in Mercerized interior wall coatings or high quality interior wall coatings. This product is resistant to alkaline substrates with an homogenou...展开 BYD5120, in the form of a white, waterborne anionic emulsion, is a vinyl versatates copolymer that can be used in Mercerized interior wall coatings or high quality interior wall coatings. This product is resistant to alkaline substrates with an homogenous gloss. Its pH value is 4.0 +/- 1.0. 收起 | |
| BYD7231 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesi...展开 BYD7231, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a binder for construction, wood, paper, and fiber applications and provides electrostatic flocking for textiles. This product offers strong cohesive strength and thickening effects. Its pH value is 5.0 +/- 1.0. 收起 | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...展开 BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. 收起 | |
| BYD8001 | Tianyi Chemical Engineering Material Co., Ltd. | BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain r...展开 BYD8001, in the form of a waterborne, white anionic emulsion, is a silicone acrylic copolymer that can be used in exterior wall coatings, natural stone coatings, and top coats. This product has yellowing and water resistance, color retention, and stain resistance. Its pH value is 9.0 +/- 1.0. 收起 | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK-3568 | BYK | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...展开 CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 收起 | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...展开 CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. 收起 | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...展开 CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 收起 | |
| CHS-Alkyd S 623 NN 50 | Spolchemie | CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher...展开 CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. 收起 | |
| CHS-Alkyd S 623 NN 60 | Spolchemie | CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher...展开 CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. 收起 | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...展开 CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起 | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...展开 CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起 | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...展开 CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起 | |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...展开 CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. 收起 | |
| CHS-Alkyd SU 621 N 50 | Spolchemie | CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...展开 CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 收起 | |
| CHS-Alkyd SU 632 N 60 | Spolchemie | CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...展开 CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 收起 | |
| CHS-Alkyd SU 671 W 60 | Spolchemie | CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is ...展开 CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is primarily used for fast air-drying coatings for interior and exterior applications. 收起 | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 收起 | |
| CHS-Epoxy 498 | Spolchemie | CHS-Epoxy 498 is a modified liquid epoxy resin that has a low molecular weight. This product is modified by a mono-functional reactive diluent. CHS-Epoxy 498 is the lower viscous version of CHS-Epoxy 521. This product has several different uses but is pri...展开 CHS-Epoxy 498 is a modified liquid epoxy resin that has a low molecular weight. This product is modified by a mono-functional reactive diluent. CHS-Epoxy 498 is the lower viscous version of CHS-Epoxy 521. This product has several different uses but is primarily used for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling floorings. 收起 | |
| CHS-Epoxy 512 | Spolchemie | CHS-Epoxy 512 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a non-reactive modifier. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agen...展开 CHS-Epoxy 512 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a non-reactive modifier. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent. The primary use for CHS-Epoxy 512 is for flooring, polymer mortars, polymer concrete, and certain applications for the electrical industry. 收起 | |
| CHS-Epoxy 517 | Spolchemie | CHS-Epoxy 517 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product is modified through a non-epoxy type reactive diluent. It has the ability to cure at either an ambient or elevated temperature level with the proper curin...展开 CHS-Epoxy 517 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product is modified through a non-epoxy type reactive diluent. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent. CHS-Epoxy 517 primary use is for polymer mortars, polymer concretes and flooring. 收起 | |
| CN104A60 | Sartomer Americas | 双官能双酚A环氧丙烯酸脂与40%SR306、三聚丙二醇二丙烯酸脂的混合物。具备良好的水分性能和高活性之间的平衡性。基础低聚物CN104，赋予Sartomers双酚A环氧丙烯酸脂最浅的颜色。 | |
| CN2264 | Sartomer Americas | CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, esp...展开 CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, especially where hardness and abrasion resistance are required, specifically for wood, paper, and flooring coatings and screen, inkjet, and flexo inks. 收起 | |
| CN9013 | Sartomer Americas | CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkag...展开 CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkage, and high hardness. CN9013's suggested applications are for wood, plastic, metal, floor, and other abrasion resistant coatings. 收起 | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Crestakyd® 10-0504 | Scott Bader | Crestakyd® 10-0504 is a 100% solids alkyd for low VOC exterior paints and wood stains | |
| Crestakyd® 10-2023 | Scott Bader | Crestakyd® 10-2023 is suitable for high solids wood stains and varnishes giving excellent durability. | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| DAPRO® AP 7010S | Elementis | DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. | |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...展开 Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. 收起 | |
| Disvacryl-1000 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1000 is a thermoplastic acrylic resin. This product includes xylene as volatile byproducts. It can be used in high-quality air-drying finishes for metal, wood, concrete, and masonry. | |
| Disvalkyd-509 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-509 is an alkyd resin made with long oils. This product derives from linseed oil. It can be used in primers, undercoats, decorative enamels, and architectural finishes. | |
| Disvalkyd-519 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-519 is an alkyd resin made from long oils. This product derives from diluted crude oil. It can be used in primers, undercoats, decorative enamels, and architectural finishes. | |
| Disvamide-660 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-660 is a reactive polyamide resin. This product appears as a liquid. It can be used in high-build polyamide coatings, castings, potting, encapsulation, and flooring applications. | |
| Docure KH-252 | Kukdo Chemical Co., Ltd. | Docure KH-252 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-252 shows good physical properties and chemical resistance. It is well suited for use as an accelerator for amine and the production of cure...展开 Docure KH-252 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-252 shows good physical properties and chemical resistance. It is well suited for use as an accelerator for amine and the production of cured epoxies and floorings. 收起 | |
| Docure KH-811 | Kukdo Chemical Co., Ltd. | Docure KH-811 is a clear medium viscosity hardener for high solid and solvent-free coatings. Particularly, it is suitable for application of two-component spray systems. Also, KH-811 has excellent properties even at low temperature. It is well suited for...展开 Docure KH-811 is a clear medium viscosity hardener for high solid and solvent-free coatings. Particularly, it is suitable for application of two-component spray systems. Also, KH-811 has excellent properties even at low temperature. It is well suited for use in the production of solvent free coatings and floorings with a high gloss sheen. 收起 | |
| Docure KH-812 | Kukdo Chemical Co., Ltd. | Docure KH-812 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-812 has low viscosity and solvent free. KH-812 has excellent coloring performance, good flexibility and high gloss. It is well suited for use in the production of ...展开 Docure KH-812 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-812 has low viscosity and solvent free. KH-812 has excellent coloring performance, good flexibility and high gloss. It is well suited for use in the production of solvent free coatings and floorings. 收起 | |
| Docure KH-813 | Kukdo Chemical Co., Ltd. | Docure KH-813 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-813 has low viscosity and solvent free. It can be used for solvent free coating systems and floorings. | |
| Docure KH-814 | Kukdo Chemical Co., Ltd. | Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulati...展开 Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulating products such as solvent free coatings. 收起 | |
| Docure KH-816 | Kukdo Chemical Co., Ltd. | Docure KH-816 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-816 gives high gloss films that are resistant to various chemicals. These properties make it ideal for formulating floorings and tank linings. | |
| Docure KH-818B | Kukdo Chemical Co., Ltd. | Docure KH-818B is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-818B gives high gloss films that are resistant to various chemicals. It can be used for solvent free coating systems and floorings. | |
| Docure KH-825 | Kukdo Chemical Co., Ltd. | Docure KH-825 is a cycloaliphatic Amine modified curing agent for use with epoxy resins. KH-825 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of floorings and other ...展开 Docure KH-825 is a cycloaliphatic Amine modified curing agent for use with epoxy resins. KH-825 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of floorings and other coatings. 收起 | |
| Docure KH-831 | Kukdo Chemical Co., Ltd. | Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with goo...展开 Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with good weathering resistance. 收起 | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...展开 Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. 收起 | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Domide G-A0533 | Kukdo Chemical Co., Ltd. | Domide G-A0533 is a low-viscosity Polyamidoamine Resin designed for reaction with liquid or solid Epoxy Resins. It can be used as all or part for use in making sealants, electrical potting, casting, coatings and flooring applications. | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...展开 DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起 | |
| ECOPOL LB-64 | Ecopol Tech | ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repelle...展开 ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repellence, cigarette burns, and stains like coffee, while also exhibiting resistance to steam, high temperatures, and stability against UV radiation. It serves as an excellent hydrophobic and oleophobic coating and it has a high adhesion to inorganic surfaces. ECOPOL LB-64 is particularly recommended as a final coating for materials highly exposed to corrosion or erosion, such as aluminum (and other metals), high-pressure laminates (HPL), wood, and glass, among others. 收起 | |
| ECOPOLBUILD 1 | Ecopol Tech | ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion and alkali resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLBUILD 16 | Ecopol Tech | ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once app...展开 ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once applied and cured, the product exhibits water-repellent properties, providing good moisture resistance. Additionally, it imparts excellent abrasion and alkali resistance. This product contains more than 70% biobased products. 收起 |
