| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...展开 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 收起 | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...展开 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 收起 | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| AB-30F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, ...展开 AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. 收起 | |
| AB-72FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. | |
| AB-91F | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more. | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| Araldite® GT 7013 | Jubail Chemical Industries Co. | Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is design...展开 Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is designed for use in general and decorative coatings for metal furniture. 收起 | |
| Araldite® GT 7014 | Jubail Chemical Industries Co. | Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is desig...展开 Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is designed for use in coating systems in which high chemical resistance is important, metal coatings, tube coatings, and pipe coatings. 收起 | |
| Araldite® GZ 280 X 80 | Jubail Chemical Industries Co. | Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is ...展开 Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is used in the formulation for primers and finishing paints applied on metal substrates. 收起 | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| Benester 742 | Benasedo | Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance. | |
| Bluepur 3037 | S.A.P.I.C.I. SpA | Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne system...展开 Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne systems. 收起 | |
| Bluepur 3080 | S.A.P.I.C.I. SpA | Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1...展开 Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1K or 2K waterborne systems. 收起 | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...展开 BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 收起 | |
| BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...展开 BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...展开 BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...展开 CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 收起 | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...展开 CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 收起 | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...展开 CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 收起 | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...展开 CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 收起 | |
| CHS-Alkyd AL 3220 | Spolchemie | CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...展开 CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. 收起 | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 收起 | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...展开 CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. 收起 | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...展开 CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. 收起 | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...展开 CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. 收起 | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...展开 CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. 收起 | |
| CHS-Alkyd S 618 W 80 | Spolchemie | CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...展开 CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. 收起 | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...展开 CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 收起 | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...展开 CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 收起 | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...展开 CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起 | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...展开 CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起 | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...展开 CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起 | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 收起 | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...展开 CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. 收起 | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...展开 CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. 收起 | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...展开 CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. 收起 | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...展开 CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. 收起 | |
| CHS-Epoxy 160 V 55 | Spolchemie | CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied ...展开 CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 1040. 收起 | |
| CHS-Epoxy 200 V 55 | Spolchemie | CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to ...展开 CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 180. 收起 | |
| CHS-Epoxy 210 X 75 | Spolchemie | CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance t...展开 CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primers, baking coating, paints for heating oil tanks, penetrates of concrete, treatment of wood and metal surfaces. 收起 | |
| CHS-Epoxy 222 IX 60 | Spolchemie | CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It come...展开 CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It comes from a solution that is 60% in a blend of solvents including isobutanol and xylene. This product is primarily used for producing anticorrosion paints for marine, railway, gas industries. This product can also be used for wood floor toppings and different metal surfaces exclusively intended for interior use. 收起 | |
| CHS-Hydrospol D 01 | Spolchemie | CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is p...展开 CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is primarily used for several different types of water-soluble air-drying coating s for interior and exterior. This product is as a steel anticorrosion primer for metals and stain for woods. 收起 | |
| CHS-Hydrospol D 101 | Spolchemie | CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for t...展开 CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for this product is estimated to be around 27%. CHS-Hydrospol D 101 is primarily used for waterborne air-drying coatings for interior and exterior uses. This product is used on metal and wood surfaces. 收起 | |
| CHS-Hydrospol D 401 | Spolchemie | CHS-Hydrospol D 401 is a binder with improved flexibility for waterborne low yellowing solvent free coatings. This product is made up of 45% water; it is VOC free and a urethane dispersal of soybean oil. It is free of any organic solvents. CHS-Hydrospol D...展开 CHS-Hydrospol D 401 is a binder with improved flexibility for waterborne low yellowing solvent free coatings. This product is made up of 45% water; it is VOC free and a urethane dispersal of soybean oil. It is free of any organic solvents. CHS-Hydrospol D 401 is primarily used for coatings on interiors and exteriors and is intended to coat metal and wood surfaces. 收起 | |
| Cinergi™ 2018 A | Lawter | Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensure...展开 Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensures the finished ink keeps desired properties while countering tarnishing. Its flexibility allows Cinergi™ 2018 A to be adaptable to a variety of metallic applications including sheet-fed inks. 收起 | |
| CN104A60 | Sartomer Americas | 双官能双酚A环氧丙烯酸脂与40%SR306、三聚丙二醇二丙烯酸脂的混合物。具备良好的水分性能和高活性之间的平衡性。基础低聚物CN104，赋予Sartomers双酚A环氧丙烯酸脂最浅的颜色。 | |
| CN294E | Sartomer Americas | CN294E是一种四官能团丙烯酸酯聚酯齐聚物。CN294E可用于UV固化涂料和油墨，包括苯胺印刷、丝网印刷和平版印刷油墨 | |
| CN299 | Sartomer Americas | 它是一种四官能丙烯酸酯聚酯低聚物，用于UV固化涂料和油墨，包括柔印、丝印和平印油墨。其特点是快速固化响应、良好的平印性能、良好的颜料润湿性和憎水/亲水平衡。 | |
| CN821 | Sartomer Americas | CN821 is a unique acrylic oligomer that will enhance adhesion to non-porous substrates. The oligomer is very low in color, allowing it to be used on white and light colored substrates. It is hydrophobic and has low odor, good water resistance, high impact...展开 CN821 is a unique acrylic oligomer that will enhance adhesion to non-porous substrates. The oligomer is very low in color, allowing it to be used on white and light colored substrates. It is hydrophobic and has low odor, good water resistance, high impact strength, and is solvent resistance. Some suggested applications of CN821 are laminating adhesives, streolithography, metal and plastic coatings, and flexo, screen, inkjet, and rotary screen inks. 收起 | |
| CN9013 | Sartomer Americas | CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkag...展开 CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkage, and high hardness. CN9013's suggested applications are for wood, plastic, metal, floor, and other abrasion resistant coatings. 收起 | |
| CN9024 | Sartomer Americas | CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoe...展开 CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoelastic properties. CN9024 has utility in a number of different applications including laminating and pressure sensitive adhesives, metal, plastic, and wood coatings, as well as flexo, litho, offset, screen, rotary screen, and letterpress inks. 收起 | |
| CN9025 | Sartomer Americas | CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot...展开 CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot be used. CN9025 has high hardness and scratch resistance. It also has good water resistance, solvent resistance, and high impact strength. It is used for glass, metal, and plastic coatings as well as flexo, litho, rotary screen, and inkjet inks. 收起 | |
| CN9167US | Sartomer Americas | ||
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...展开 Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. 收起 | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Curalite™ Ox | Perstorp | Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins a...展开 Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins and increases through cure and chemical resistance of the formulation. Curalite™ Ox is suitable for all types of cationic UV printing inks and overprint varnishes both for metal and plastic substrates. 收起 | |
| CV-2680-12 | NuSil Silicone Technology 1 | CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. ...展开 CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. easy clean-up, and consistent bond thickness. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展开 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展开 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| Disvacryl-1000 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1000 is a thermoplastic acrylic resin. This product includes xylene as volatile byproducts. It can be used in high-quality air-drying finishes for metal, wood, concrete, and masonry. | |
| Disvacryl-1002 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1002 is a thermoplastic acrylic resin. This product includes methanol olefins and xylene as volatile byproducts. It can be used in acrylic coatings for plastic, metal and wood substrates. | |
| Domacryl 0769 45 Wa/BG/SA | HELIOS RESINS | Domacryl 0769 45 Wa/BG/SA is a secondary acrylic dispersion with a medium OH number. This resin was developed as a polyol component for cost-efficient 2K PUR aqueous clear and top coats for wood, plastic, and metal surfaces. Excellent applicability, resis...展开 Domacryl 0769 45 Wa/BG/SA is a secondary acrylic dispersion with a medium OH number. This resin was developed as a polyol component for cost-efficient 2K PUR aqueous clear and top coats for wood, plastic, and metal surfaces. Excellent applicability, resistance, and appearance are achieved in combination with water-emulsifiable polyisocyanates (e.g. hydrophilically modified HDI-based polyisocyanates). 收起 | |
| Domacryl 5109 85 BAc/Ac | HELIOS RESINS | Domacryl 5109 85 BAc/Ac is a very high solid reactive hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack systems for automotive refinishing and general metal coatings (clear and pigmented top coats). | |
| Domacryl 5245 75 BAc | HELIOS RESINS | Domacryl 5245 75 BAc is a premium hydroxy acrylic resin with a very long pot life and super-fast hardness development. The resin is designed for TOP PERFORMANCE 2K PUR air or forced drying systems in automotive, ACE, and general metal top coats. The bio-b...展开 Domacryl 5245 75 BAc is a premium hydroxy acrylic resin with a very long pot life and super-fast hardness development. The resin is designed for TOP PERFORMANCE 2K PUR air or forced drying systems in automotive, ACE, and general metal top coats. The bio-based content is 17% of the dry matter by the Carbon-14 method. 收起 | |
| Domacryl 5369 75 BAc | HELIOS RESINS | Domacryl 5369 75 BAc is a hydroxy acrylic resin with a very long pot life and a super-fast hardness development. This resin is designed for TOP PERFORMANCE 2K PUR air or forced drying systems in automotive, ACE, and general metal top coats. | |
| Domacryl 5485 75 BAc | HELIOS RESINS | Domacryl 5485 75 BAc is a highly reactive hydroxy acrylic resin developed for room temperature drying or forced drying two-pack systems for automotive refinishing (clear and pigmented top coats). This resin is suitable for DTM (direct-to-metal) applicatio...展开 Domacryl 5485 75 BAc is a highly reactive hydroxy acrylic resin developed for room temperature drying or forced drying two-pack systems for automotive refinishing (clear and pigmented top coats). This resin is suitable for DTM (direct-to-metal) application. Domacryl 5485 75 BAc has 10% bio-based content on solid resin. Available also in MAK solvent. 收起 | |
| Domalkyd 0545 40 Wa | HELIOS RESINS | Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-base...展开 Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance approach as certified by the ISCC PLUS). 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起 | |
| EBECRYL® 225 | Allnex | EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic ...展开 EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic tin compounds, heavy metals or quinones. 收起 | Request Sample |
| EBECRYL® 546 | Allnex | Ebecryl® 546 is a chlorine free UV/EB curable polyester resin diluted with TMPTA (1). It has been specifically designed to provide good adhesion to plastic substrates. Films of Ebecryl® 546 cured by ultraviolet light (UV) or electron beam (EB) result in g...展开 Ebecryl® 546 is a chlorine free UV/EB curable polyester resin diluted with TMPTA (1). It has been specifically designed to provide good adhesion to plastic substrates. Films of Ebecryl® 546 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. 收起 | Request Sample |
| EBECRYL® 575 | Allnex | EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness...展开 EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. 收起 | Request Sample |
| ECOPOL LB-64 | Ecopol Tech | ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repelle...展开 ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repellence, cigarette burns, and stains like coffee, while also exhibiting resistance to steam, high temperatures, and stability against UV radiation. It serves as an excellent hydrophobic and oleophobic coating and it has a high adhesion to inorganic surfaces. ECOPOL LB-64 is particularly recommended as a final coating for materials highly exposed to corrosion or erosion, such as aluminum (and other metals), high-pressure laminates (HPL), wood, and glass, among others. 收起 | |
| ECOPOLBUILD 1 | Ecopol Tech | ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion and alkali resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLBUILD 16 | Ecopol Tech | ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once app...展开 ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once applied and cured, the product exhibits water-repellent properties, providing good moisture resistance. Additionally, it imparts excellent abrasion and alkali resistance. This product contains more than 70% biobased products. 收起 | |
| ECOPOLBUILD 3 | Ecopol Tech | ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLCOAT CCR 30-F | Ecopol Tech | ECOPOLCOAT CCR 30-F is an aqueous anionic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with ...展开 ECOPOLCOAT CCR 30-F is an aqueous anionic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction, and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. 收起 | |
| Epokukdo KR-170 | Kukdo Chemical Co., Ltd. | Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used...展开 Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used in formulating for the floor coating, molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. This product having medium-high viscosity is suitable for using in non-solvent adhesive, resin mortar, construction applications and flexible coating. KR-170 is particularly suitable for being applied on non-polar substrate surfaces such as PE or PP, greasy surface or oily surface of metals and so forth. 收起 | |
| Epokukdo KSR-1000 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-1000 is a silicone modified epoxy resin specially designed for silicone modified bisphenol-A type in order to improve heat-resistance when it is properly formulated and cured. KSR-1000 could be used not only in straight epoxy system but also ...展开 Epokukdo KSR-1000 is a silicone modified epoxy resin specially designed for silicone modified bisphenol-A type in order to improve heat-resistance when it is properly formulated and cured. KSR-1000 could be used not only in straight epoxy system but also in hybrid system in combination with the polyester resin for very good edge coverage, impact strength, and especially heat-resistance with excellent mechanical and chemical properties. 收起 | |
| Epokukdo KSR-176X90 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-176X90 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as metals and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poor adh...展开 Epokukdo KSR-176X90 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as metals and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poor adhesion. It shows excellent wettability and leveling and high gloss as well. KSR-176X90 dissolved in xylene follows the trends of lightweight using light materials. 收起 | |
| Epokukdo KSR-177 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poo...展开 Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poor adhesion. KSR-177 follows the trends of lightweight using light materials. 收起 | |
| Epokukdo YD-017 | Kukdo Chemical Co., Ltd. | Epokukdo YD-017 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to...展开 Epokukdo YD-017 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-017 are process equipment coating enamels, collapsible tube coatings, can coating, metal furniture finishes, and wire enamels. 收起 | |
| Epokukdo YD-017H | Kukdo Chemical Co., Ltd. | Epokukdo YD-017H is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to...展开 Epokukdo YD-017H is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD -017H are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. 收起 | |
| Epokukdo YD-019 | Kukdo Chemical Co., Ltd. | Epokukdo YD-019 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to...展开 Epokukdo YD-019 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-019 are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. 收起 | |
| Epokukdo YD-019K | Kukdo Chemical Co., Ltd. | Epokukdo YD-019K is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to...展开 Epokukdo YD-019K is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-019K include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. 收起 | |
| Epokukdo YD-020 | Kukdo Chemical Co., Ltd. | Epokukdo YD-020 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to ...展开 Epokukdo YD-020 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-020 include process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. 收起 |
