| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...展开 Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. 收起 | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...展开 Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. 收起 | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...展开 Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. 收起 | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...展开 Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. 收起 | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...展开 Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. 收起 | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...展开 Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 收起 | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...展开 ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| Aspartic Ester Resin Sunaspar SN220 | Suny Chem | 聚天门冬氨酸酯树脂Sunaspar SN220是一种无溶剂的，带有仲氨基可与-NCO反应的树脂，相当于产品NH 1220。可用于粘合剂领域；可用于钢结构、石油管道等重、轻防腐领域的防腐涂料；或用于泡沫景观、混凝土防水材料等领域 | |
| Aspartic Ester Resin Sunaspar SN520 | Suny Chem | Sunaspar SN520是一种无溶剂，带有仲氨基可与-NCO 反应的树脂，相当于NH 1520。这款产品具有高固低粘，可制成高固体份低粘度环保涂料，本品与大部分羟基丙烯酸树脂、CAB具有优异的相溶性；涂膜具有优异的硬度，丰满度、流平性能和光泽。这款产品广泛用于汽车，工业领域和防腐蚀油漆中。 | |
| Brasmide NR 7050 | SGS Polimeros | Brasmide NR 7050 is a polyamide resin in anhydrous ethanol, obtained by the reaction of fatty acids and polyamides. It is designed for use in paints with high solids content in order to improve gloss, chemical resistance, and mechanical resistance. | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...展开 CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 收起 | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...展开 CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 收起 | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...展开 CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. 收起 | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...展开 CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. 收起 | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 收起 | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...展开 CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. 收起 | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...展开 CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. 收起 | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...展开 CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. 收起 | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...展开 CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. 收起 | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...展开 CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. 收起 | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 收起 | |
| CHS-Alkyd T 501 WX 55 | Spolchemie | CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...展开 CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. 收起 | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...展开 CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. 收起 | |
| CHS-Epoxy 381 X 90 | Spolchemie | CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid pain...展开 CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid paints and manufacture of anticorrosive coatings and enamels. 收起 | |
| CHS-Epoxy 501 | Spolchemie | CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...展开 CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. 收起 | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...展开 CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. 收起 | |
| CHS-Epoxy 514 | Spolchemie | CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...展开 CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. 收起 | |
| CHS-Epoxy 520 X 90 | Spolchemie | CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is...展开 CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is for producing solid paints and manufacture anticorrosive coatings and enamels. 收起 | |
| CHS-Epoxy 571 | Spolchemie | CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating mater...展开 CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 收起 | |
| CHS-Epoxy 572 | Spolchemie | CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating mater...展开 CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 收起 | |
| CHS-Epoxy 573 | Spolchemie | CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insula...展开 CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 收起 | |
| CHS-Epoxy 574 | Spolchemie | CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applicatio...展开 CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 收起 | |
| CHS-Epoxy 575 | Spolchemie | CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applicatio...展开 CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. 收起 | |
| Disvacryl-1013 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1013 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in acrylic isocyanate systems for high-performance polyurethane coatings that provide good chemical and corrosion resis...展开 Disvacryl-1013 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in acrylic isocyanate systems for high-performance polyurethane coatings that provide good chemical and corrosion resistance. 收起 | |
| Disvacryl-1014 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1014 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in automotive refinishes, wood coatings, industrial coatings, and chemically resistant high-performance polyurethane co...展开 Disvacryl-1014 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in automotive refinishes, wood coatings, industrial coatings, and chemically resistant high-performance polyurethane coatings. 收起 | |
| Disvacryl-1015 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1015 is an acrylic polyol resin. This product includes cellosolve acetate as a volatile byproduct. It can be used in high-solid resins that provide good durability for high-build coatings. | |
| Disvacryl-1016 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1016 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in chemically resistant high-performance polyurethane coatings. | |
| Disvacryl-1018 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1018 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in polyurethane coatings with good flexibility and weatherproof properties. | |
| Disvacryl-1019 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1019 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in fast-drying polyurethane coatings with good UV resistance. It can also be used in wood coatings. | |
| Disvamide-616 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-616 is a reactive polyamide resin in a 70% solution of xylene. This product appears as a surface liquid. It can be used in protective surface coatings. | |
| Disvester-850 | D.S.V. Chemicals Pvt. Ltd. | Disvester-850 is an esterified epoxy resin. This product derives from mixed-length oils. It can be used in automotive primers, chemically resistant coatings, air-drying and stoving paints, and metallic decoration varnishes. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Docure YC-230H | Kukdo Chemical Co., Ltd. | Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...展开 Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. 收起 | |
| Domide G-5022X70 | Kukdo Chemical Co., Ltd. | Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well sui...展开 Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well suited for use in maintenance coatings and primers. 收起 | |
| Epokukdo KB-560 | Kukdo Chemical Co., Ltd. | Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展开 Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-562P | Kukdo Chemical Co., Ltd. | Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展开 Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-563P | Kukdo Chemical Co., Ltd. | Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...展开 Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KBPN-110 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBP...展开 Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for powder coating or laminates. It also has high reactivity so that it is curable at ambient temperature. 收起 | |
| Epokukdo KBPN-115 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-115 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-110 is a small molec...展开 Epokukdo KBPN-115 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating or Laminates. It also has high reactivity so that it is curable at ambient temperature. 收起 | |
| Epokukdo KBPN-120 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-120 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-120 is a small molec...展开 Epokukdo KBPN-120 has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional Epoxy Resin. KBPN-120 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for Powder Coating or Laminates. It also has high reactivity so that it is curable at ambient temperature. 收起 | |
| Epokukdo KBR-1726 | Kukdo Chemical Co., Ltd. | Epokukdo KBR-1726 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1726 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and he...展开 Epokukdo KBR-1726 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1726 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KBR-1728 | Kukdo Chemical Co., Ltd. | Epokukdo KBR-1728 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1728 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and he...展开 Epokukdo KBR-1728 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1728 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KBR-1729 | Kukdo Chemical Co., Ltd. | Epokukdo BR-1729 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1729 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and hea...展开 Epokukdo BR-1729 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1729 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KBR-1753 | Kukdo Chemical Co., Ltd. | Epokukdo KBR-1753 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1753 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and he...展开 Epokukdo KBR-1753 is an Epoxy Resin of Cycloaliphatic Glycidyl Ether modified type, and KBH-1089 is a hardener of Acid Anhydride series. KBR-1753 is used for Filament Winding and multilayer accompanied with excellent mechanical properties, chemical and heat resistance. 收起 | |
| Epokukdo KD-211D | Kukdo Chemical Co., Ltd. | Epokukdo KD-211D is a novolac modified solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-211D is a novolac modified solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-211E | Kukdo Chemical Co., Ltd. | Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good m...展开 Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-211EX75 | Kukdo Chemical Co., Ltd. | Epokukdo KD-211ED is a solid type standard epoxy resin derived from a bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211EX75 dissolved in xylene is gener...展开 Epokukdo KD-211ED is a solid type standard epoxy resin derived from a bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211EX75 dissolved in xylene is generally used in many applications. 收起 | |
| Epokukdo KD-211G | Kukdo Chemical Co., Ltd. | Epokukdo KD-211G is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good m...展开 Epokukdo KD-211G is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-211GX75 | Kukdo Chemical Co., Ltd. | Epokukdo KD-211G is a solid type standard epoxy resin derived from bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211GX75 dissolved in xylene is generall...展开 Epokukdo KD-211G is a solid type standard epoxy resin derived from bisphenol-A and epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, KD-211GX75 dissolved in xylene is generally used in many applications. 收起 | |
| Epokukdo KD-211H | Kukdo Chemical Co., Ltd. | Epokukdo KD-211H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-211H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-213 | Kukdo Chemical Co., Ltd. | Epokukdo KD-213 is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and ch...展开 Epokukdo KD-213 is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-213C | Kukdo Chemical Co., Ltd. | Epokukdo KD-213C is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-213C is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-213F2 | Kukdo Chemical Co., Ltd. | Epokukdo KD-213F2 is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain...展开 Epokukdo KD-213F2 is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-213H | Kukdo Chemical Co., Ltd. | Epokukdo KD-213H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...展开 Epokukdo KD-213H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. 收起 | |
| Epokukdo KD-214C | Kukdo Chemical Co., Ltd. | Epokukdo KD-214C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and c...展开 Epokukdo KD-214C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-214CR | Kukdo Chemical Co., Ltd. | Epokukdo KD-214CR is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain...展开 Epokukdo KD-214CR is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-214L | Kukdo Chemical Co., Ltd. | Epokukdo KD-214L is a high molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, m...展开 Epokukdo KD-214L is a high molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-214M | Kukdo Chemical Co., Ltd. | Epokukdo KD-214M is a high molecular weight epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, mechani...展开 Epokukdo KD-214M is a high molecular weight epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flexibility, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242C | Kukdo Chemical Co., Ltd. | Epokukdo KD-242C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and c...展开 Epokukdo KD-242C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242G | Kukdo Chemical Co., Ltd. | Epokukdo KD-242G is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and c...展开 Epokukdo KD-242G is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242GHF | Kukdo Chemical Co., Ltd. | Epokukdo KD-242GHF is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and...展开 Epokukdo KD-242GHF is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242GR | Kukdo Chemical Co., Ltd. | Epokukdo KD-242GR is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain...展开 Epokukdo KD-242GR is a special solid epoxy resin containing polyarcrylate-flow-modifier, derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242H | Kukdo Chemical Co., Ltd. | Epokukdo KD-242H is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flow, mechanical properties...展开 Epokukdo KD-242H is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flow, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-242S | Kukdo Chemical Co., Ltd. | Epokukdo KD-242S is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flow, mechanical properties...展开 Epokukdo KD-242S is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, flow, mechanical properties and chemical resistance. 收起 | |
| Epokukdo KD-243C | Kukdo Chemical Co., Ltd. | Epokukdo KD-243C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and c...展开 Epokukdo KD-243C is a standard solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and chemical resistance. 收起 |
