| DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...展开 DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. 收起 | |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...展开 DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. 收起 | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...展开 DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. 收起 | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | |
| DBE-224 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-621 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-712 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-814 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-821 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBP-534 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBP-732 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DDSA | Univar Solutions | DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fu...展开 DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fuels and lubricating oils. 收起 | Request Sample |
| Decabromodiphenyl Oxide | Chemceed | 十溴二苯醚用作阻燃剂，在弹性体、电线&电缆，织物涂料，电器&电子设备，汽车零部件和建筑材料中使用。 | |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...展开 Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. 收起 | Request Sample |
| DEE FO® 1015 | Munzing Chemie | DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and a...展开 DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and adhesives. 收起 | |
| DEE FO® 2020E/50 | Munzing Chemie | DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used ...展开 DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used PSA, laminating, packaging, envelope and construction adhesives. 收起 | |
| DEE FO® 215 | Munzing Chemie | DEE FO® 215 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It is a universal defoamer that is used in a variety of adhesive applications, including PSA, laminating, packaging, envelope, wood glue, construction, and n...展开 DEE FO® 215 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It is a universal defoamer that is used in a variety of adhesive applications, including PSA, laminating, packaging, envelope, wood glue, construction, and natural/neoprene formulations. It is also commonly used in clear, industrial water-based, and high gloss coatings, as well as traffic paints. 收起 | |
| DEE FO® 806-102 | Munzing Chemie | DEE FO® 806-102 is a liquid opaque off-white defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that provides initial and long-term persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, an...展开 DEE FO® 806-102 is a liquid opaque off-white defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer that provides initial and long-term persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, as well as in industrial water-based, and wood based coatings, and in traffic paints. 收起 | |
| DEE FO® 97-3 | Munzing Chemie | DEE FO® 97-3 is a liquid opaque off-white defoamer that is a blend of metallic stearate and mineral oil. It is a defoamer that is efficient in pigment dispersing and defoaming metallic inks. It is used in clear and wood coatings, traffic paint, and natura...展开 DEE FO® 97-3 is a liquid opaque off-white defoamer that is a blend of metallic stearate and mineral oil. It is a defoamer that is efficient in pigment dispersing and defoaming metallic inks. It is used in clear and wood coatings, traffic paint, and natural, neoprene, wood glue, construction, envelope, and label adhesives. 收起 | |
| DEE FO® PI-16P | Munzing Chemie | DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations....展开 DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations. It is commonly used in corrugated, envelope, film and foil, and metallic printing inks, and can be used in PVOH adhesives. 收起 | |
| DEE FO® PI-547 | Munzing Chemie | DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids c...展开 DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids content coatings and printing ink. It is also used for aqueous ink systems include flexible film, OPV and metallic. 收起 | |
| DEE FO® SC-180 | Munzing Chemie | DEE FO® SC-180 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is specially designed for coating applications. It is also commonly used in wood and seed coatings and...展开 DEE FO® SC-180 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is specially designed for coating applications. It is also commonly used in wood and seed coatings and adhesives. 收起 | |
| DEE FO® XRM-1547A | Munzing Chemie | DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV sys...展开 DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations, such as film/foil, envelope and metallic. 收起 | |
| Defoamer EDW | HS CHEM CO.,LTD | Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex ...展开 Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. 收起 | |
| Defoamer EDW-707 | HS CHEM CO.,LTD | Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...展开 Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. 收起 | |
| Defoamer EDW-709 | HS CHEM CO.,LTD | Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...展开 Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. 收起 | |
| Defoamer EDW-S | HS CHEM CO.,LTD | Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, late...展开 Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. 收起 | |
| Dehydrated Castor Fatty Acid - H Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...展开 Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. 收起 | |
| Dehydrated Castor Fatty Acid - L Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...展开 Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. 收起 | |
| Dehydrated Castor Oil SL-DCO | SWISLOYD LIMITED | Dehydrated Castor Oil SL-DCO is a vegetable oil obtained from the castor bean. This product is a colorless to very pale yellow liquid with a boiling point of 313°C and a density of 961 kg/m3. It is primarily used in coatings, adhesives, and sealants. | |
| Denatonium Benzoate, 20% in EG | Chemceed | Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint ...展开 Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint stripper and toilet cleaner. 收起 | |
| Densil® C40 Antimicrobial | Arxada | Densil® C40 Antimicrobial is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Density Marker Beads | Cospheric LLC | Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and ...展开 Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and sub-cellular particles. Generally a set of several density marker beads covering a range of densities is used. The gradient is calibrated with beads that float at different heights within the column. When a test sample is added to the column, it drops until the point of neutral buoyancy, and the density is determined from the calibration chart. Density gradient columns can be used to measure the density of any sample. 收起 | |
| DERCOLYTE LTG | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE LTG通过萜烃聚合制备，具有低软化点和低VOC含量。推荐用于增塑作用和改善压敏胶粘剂的附着力 | |
| DES-T03 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T11 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T12 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T15 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T23 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| Desmodur® BL 3272 MPA | Covestro | Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...展开 Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. 收起 | |
| Desmodur® BL 3370 MPA | Covestro | Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable o...展开 Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3370 MPA are used for the industrial finishing of appliances, coil coating, can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. 收起 | |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...展开 Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. 收起 | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...展开 Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. 收起 | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...展开 Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. 收起 | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...展开 Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. 收起 | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...展开 Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. 收起 | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...展开 Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. 收起 | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...展开 Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. 收起 | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...展开 Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. 收起 | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...展开 Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. 收起 | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...展开 Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. 收起 | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...展开 Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. 收起 | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...展开 Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. 收起 | Request Sample |
| Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the syn...展开 Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the synthesis of polymers. 收起 | |
| DIBUTYL PHTHALATE (DBP) | Aekyung Petrochemical Co., Ltd. | DIBUTYL PHTHALATE (DBP) is a common plasticizer for PVC. This product is highly compatible with other resins. It is used in construction materials, paint, adhesives, and lubricants. | |
| Dibutyl Phthalate (DBP) | Chemceed | 邻苯二甲酸二丁酯是一种增塑剂，通常应用于PVC和涂料中。ChemCeed以桶装、手提袋装和散装供应。包装需定制的请来电查问 | |
| Diethylaminoethyl Methacrylate (DEAEMA) | Shanghai WellTone Material Technology Co., Ltd. | Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive pro...展开 Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive production applications. 收起 | |
| Dimethyl Sebacate (DMS) | Chemceed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...展开 Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. 收起 | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...展开 Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. 收起 | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...展开 Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| DISPERBYK®-118 | BYK | DISPERBYK®-118是一种用于无溶剂系统的湿润和分散添加剂，可以稳定酸性、中性和基本型二氧化钛，着色无机颜料，透明氧化铁，填料和效果颜料。 | |
| DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DISPERBYK®-180 | BYK | 水性、溶剂型和无溶剂胶粘剂和密封剂用润湿和分散剂 | |
| DISPERBYK®-190 | BYK | 水性胶粘剂和密封剂用润湿和分散剂 | |
| DISPERBYK®-191 | BYK | 水性胶粘剂和密封剂用润湿和分散剂 | |
| DISPERBYK®-192 | BYK | 水性胶粘剂和密封剂用润湿和分散剂 | |
| DISPERBYK®-2018 | BYK | DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates. | |
| DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | Request Sample |
| DMS-A11 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A12 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A15 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A21 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A211 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
| DMS-A214 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
| DMS-A31 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A32 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A32R | Gelest, Incorporated | Reduced volatility grade aminopropyl terminated polydimethylsiloxane. | |
| DMS-B12 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
| DMS-B25 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
| DMS-B31 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
| DMS-H03 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H11 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H21 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H25 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H31 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-H41 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
| DMS-L21 | Gelest, Incorporated | Chloromethyl terminated polydimethylsiloxane. | |
| DMS-T21 | Gelest, Incorporated | General purpose silicone composed of polymer chains with unique flexibility. It has virtually no energy barrier for rotation resulting in one of the lowest glass-transition temperatures of any polymer. | |
| DMS-T21M50 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
| DMS-T25 | Gelest, Incorporated | General purpose silicone composed of polymer chains with unique flexibility. It has virtually no energy barrier for rotation resulting in one of the lowest glass-transition temperatures of any polymer. | |
| DMS-T31M50 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
| DMS-T41M50 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
| DMS-T51B20 | Gelest, Incorporated | Silicone fluid blend. | |
| DMS-T51M35 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
| DMS-T72B15 | Gelest, Incorporated | Silicone fluid blend. | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applicatio...展开 DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. 收起 | |
| Docure KC-305H | Kukdo Chemical Co., Ltd. | Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...展开 Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. 收起 |
