UL Prospector

成功!

成功保存搜索结果
AROPLAZ® 6126-Z-65 Polynt Composites AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be u...展开 AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be used in melamine-crosslinked baking enamels for coil coating applications that need high flexibility. 收起
ASKOFEN R 9600 ASK Chemicals ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be...展开 ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated. Coatings based on ASKOFEN R 9600 provide good adhesion, hardness and flexibility as well as excellent sterilization resistance and chemical resistance with exception of strong alkalines. This product is recommended as a crosslinker for epoxy and polyester resins for packaging coatings, and is also suitable for can and coil coatings. 收起
Arobras™ 6120 ASK Chemicals Arobras™ 6120 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 9080 ASK Chemicals Arobras™ 9080 is a pure alkyd drying resin, average high solid soy oil. Shows good compatibility with other resins such as phenolated, short, medium, acrylated and regular, and compatibility with mineral oils.
BENESTER 5327 Benasedo BENESTER 5327 is a high – solids, slightly branched, saturated Polyester Resin. It is particularly suggested to increase flexibility of the polyesters resins in can and coil systems, crosslinked with amino-resins or blocked aliphatic polyisocyanates.
BENESTER T 76 Benasedo BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphat...展开 BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphatic polyisocyanates, used in can and coilcoating industry where post-formability is required. 收起
BEPD Perstorp BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...展开 BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. 收起
BEPD 70L Perstorp BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...展开 BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. 收起
Benester 27 Benasedo Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications.
Benester 46 Benasedo Benester 46 is a linear, saturated, slightly branched non yellowing Polyester resin. It is suggested for increasing the polyester systems flexibility. It is also suggested for baking primers and topcoats used in can and coil - coating fields.
Benester 694 Benasedo Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisoci...展开 Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisocianates, suitable for the coil-coating industry, where good mechanical performances are required. Benester 694 is also recommended for anticorrosive primers used in the Automotive industry. 收起
Benester 910 Benasedo Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked ...展开 Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked aliphatic polyisocyanates so to guarantee good adhesion on alluminium and glavanized steel, for high-gloss and flexible exterior top-coats. 收起
CHS-Epoxy 030 Spolchemie CHS-Epoxy 030 is a high molecular weighted solid epoxy resin. This is a type 9 solid epoxy resin with epoxide equivalent weight (EEW) range between 2220-4000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 050 Spolchemie CHS-Epoxy 050 is a high molecular weighted solid epoxy resin. This is a type 7 solid epoxy resin with epoxide equivalent weight (EEW) range between 1550-2000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 070 Spolchemie CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can ...展开 CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings. 收起
Request Sample CYMEL® NF 2000A Allnex CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films th...展开 CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. 收起
Coronate® 2507 Tosoh Corporation Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
Coronate® 2513 Tosoh Corporation Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
Coronate® AP-M Tosoh Corporation Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
Coronate® BI-301 Tosoh Corporation Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals...展开 Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
EXOCOAT™ 143 Axcentive Sarl EXOCOAT™ 143 by Axcentive is an easy to clean and very effective anti-graffiti organometallic polymersuitable for use in coatings for metal, plastic and glass substrates. Durability is a unique feature of EXOCOAT™ 143, while it covalently bonds with the ...展开 EXOCOAT™ 143 by Axcentive is an easy to clean and very effective anti-graffiti organometallic polymersuitable for use in coatings for metal, plastic and glass substrates. Durability is a unique feature of EXOCOAT™ 143, while it covalently bonds with the substrate resulting in a very durable finish. As such it can sustain mechanical abrasion, chemical attack and is UV stable.. EXOCOAT™ 143 is suitable for use in high performance industrial coatings as well as in marine and automotive care applications. 收起
Epotec® YD 010 S Aditya Birla Epotec® YD 010 S is a high molecular weight, unmodified, standard solid epoxy resin which displays excellent flexibility and good adhesion. This product is ideal for use in can coatings, tube & drum linings, and high performance primers.
Epotec® YD 017 Aditya Birla Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters f...展开 Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. 收起
Epotec® YD 017S Aditya Birla Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufactu...展开 Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. 收起
Epotec® YD 019 Aditya Birla Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resist...展开 Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. 收起
Epotec® YD 019S Aditya Birla Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and ...展开 Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. 收起
Epotec® YD 126 Aditya Birla Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is id...展开 Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起
Epotec® YD 127 Aditya Birla Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is i...展开 Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起
Epotec® YD 128 Aditya Birla Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use i...展开 Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automobile coatings, can & coil coatings, and marine & industrial protective coatings. 收起
Epotec® YD 128 ED Aditya Birla Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-dep...展开 Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primers and coatings, this product is also well-suited for use in various solvent-based & solvent-free coatings, can & coil coatings, and marine & industrial coatings. 收起
Epotec® YD 907 Aditya Birla Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coat...展开 Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coatings, and linings for tubes and drums. 收起
Epotec® YD 909 Aditya Birla Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical r...展开 Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. 收起
Epotec® YDFM 250 Aditya Birla Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins...展开 Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起
Epotec® YDFM 261LV Aditya Birla Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhe...展开 Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起
Epotec® YDFM 262 Aditya Birla Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...展开 Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起
Epotec® YDFM 269 Aditya Birla Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...展开 Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. 收起
Epotec® YDPN 631 Aditya Birla Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings.
Epotec® YDPN 638 Aditya Birla Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings...展开 Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, tank linings, chemical resistant coatings, adhesives, and coil coatings. 收起
Epotec® YDPN 638 MEK 80 Aditya Birla Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance....展开 Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance. This product is ideal for use in can, coil, marine, and protective coatings. 收起
Epotec® YDPN 638LV Aditya Birla Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & p...展开 Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, chemical resistant coatings, tank linings, adhesives, and coil coatings. 收起
Epotec® YDPN 661 Aditya Birla Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings.
HS9701 Tianyi Chemical Engineering Material Co., Ltd. HS9701, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in coil coatings, inks, and vacuum plating primers. This product wets pigments well and is resistant to boiling water.
Methyl Propanediol Perstorp Methyl Propanediol is a clear colorless liquid that is used in saturated and unsaturated polyesters for powder coatings, coil coatings and other stoving enamels.
Microspersion® 400SM-40 Micro Powders, Inc. Microspersion® 400SM-40 is a nonionic water based dispersion of spherical submicron PTFE.
Neopentyl Glycol 90 Perstorp Neopentyl Glycol 90 is a colorless, aqueous solution. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats.
Nichigo-Polyester LP011 Nippon Gohsei Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...展开 Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. 收起
ORGASOL® 1002 D NAT 1 Arkema Orgasol ORGASOL® 1002 D NAT 1 is spheroidal polyamide 6 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 1002 D NAT 1 has a high melting temperature, above 210°C. ORGASOL® is a range of high performance ultra-fine polyami...展开 ORGASOL® 1002 D NAT 1 is spheroidal polyamide 6 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 1002 D NAT 1 has a high melting temperature, above 210°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 1002 ES5 NAT 1 Arkema Orgasol ORGASOL® 1002 ES5 NAT 1 is spheroidal polyamide 6 powder with a narrow particle size distribution and an average diameter of 50µm. ORGASOL® 1002 ES5 NAT 1 has a high melting temperature, above 210°C. ORGASOL® is a range of high performance ultra-fine pol...展开 ORGASOL® 1002 ES5 NAT 1 is spheroidal polyamide 6 powder with a narrow particle size distribution and an average diameter of 50µm. ORGASOL® 1002 ES5 NAT 1 has a high melting temperature, above 210°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2001 EXD NAT 1 Arkema Orgasol ORGASOL® 2001 EXD NAT 1 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 10µm. ORGASOL® 2001 EXD NAT 1 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide p...展开 ORGASOL® 2001 EXD NAT 1 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 10µm. ORGASOL® 2001 EXD NAT 1 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2001 UD NAT 1 Arkema Orgasol ORGASOL® 2001 UD NAT 1 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 5µm. ORGASOL® 2001 UD NAT 1 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide pow...展开 ORGASOL® 2001 UD NAT 1 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 5µm. ORGASOL® 2001 UD NAT 1 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2002 D NAT 1 Arkema Orgasol ORGASOL® 2002 D NAT 1 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 2002 D NAT 1 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powde...展开 ORGASOL® 2002 D NAT 1 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 2002 D NAT 1 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2002 ES3 NAT 3 Arkema Orgasol ORGASOL® 2002 ES3 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 30µm. ORGASOL® 2002 ES3 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide p...展开 ORGASOL® 2002 ES3 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 30µm. ORGASOL® 2002 ES3 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2002 ES4 NAT 3 Arkema Orgasol ORGASOL® 2002 ES4 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 40µm. ORGASOL® 2002 ES4 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide p...展开 ORGASOL® 2002 ES4 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 40µm. ORGASOL® 2002 ES4 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2002 ES5 NAT 3 Arkema Orgasol ORGASOL® 2002 ES5 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 50µm. ORGASOL® 2002 ES5 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide p...展开 ORGASOL® 2002 ES5 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 50µm. ORGASOL® 2002 ES5 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
ORGASOL® 2002 ES6 NAT 3 Arkema Orgasol ORGASOL® 2002 ES6 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 60µm. ORGASOL® 2002 ES6 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide p...展开 ORGASOL® 2002 ES6 NAT 3 is spheroidal polyamide 12 powder with a narrow particle size distribution and an average diameter of 60µm. ORGASOL® 2002 ES6 NAT 3 has a melting temperature of 177°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement 收起
Permanent Yellow HR Hangzhou Tiankai (China) Enterprise Co., Ltd. Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solven...展开 Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solvent-based inks, and water-based inks. 收起
Polurene LP 1810 S.A.P.I.C.I. SpA Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...展开 Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. 收起
RILSAN® D30 NAT Arkema Orgasol RILSAN® D30 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 21 - 27 µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in c...展开 RILSAN® D30 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 21 - 27 µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. 收起
RILSAN® D40 NAT Arkema Orgasol RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27 - 31 µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in c...展开 RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27 - 31 µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. 收起
RILSAN® D50 NAT Arkema Orgasol RILSAN® D50 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 40 - 46 µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in ...展开 RILSAN® D50 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 40 - 46 µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. 收起
RILSAN® D60 NAT Arkema Orgasol RILSAN® D60 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 43 - 55µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in c...展开 RILSAN® D60 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 43 - 55µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. 收起
RILSAN® D80 NAT Arkema Orgasol RILSAN® D80 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 95 - 105µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in ...展开 RILSAN® D80 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 95 - 105µm and a melting temperature of 186°C. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. 收起
Resiflow® L-210 Estron Chemical, Inc. Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...展开 Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. 收起
Resiflow® L-3075 Estron Chemical, Inc. Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...展开 Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. 收起
Resiflow® L-37 Estron Chemical, Inc. Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...展开 Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. 收起
Resiflow® L-45D Estron Chemical, Inc. Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...展开 Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. 收起
Resiflow® L5 Estron Chemical, Inc. Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...展开 Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. 收起
Resiflow® LF Estron Chemical, Inc. Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...展开 Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. 收起
Resiflow® LH-241 Estron Chemical, Inc. Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety o...展开 Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety of binder chemistries to promote smoothness and gloss. Resiflow® LH-241 is well suited for coil coatings and clearcoats. 收起
Resiflow® LV Estron Chemical, Inc. Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...展开 Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. 收起
Resiflow® LV-67 Estron Chemical, Inc. Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....展开 Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. 收起
Resiflow® S Estron Chemical, Inc. Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...展开 Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. 收起
SCD 1066 Etna Tec Limited, LLC SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and prim...展开 SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and primers, but can also be used for adhesives, appliance coatings, and container coatings. 收起
Request Sample TEGO® AddBond LP 1600 Evonik Operations GmbH, BL Coating Additives TEGO® AddBond LP 1600是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性,增加了固体含量,改善了光泽度并提供广泛的可溶性和兼容性。这款产品推荐用于罐头及卷材涂料和工业涂料等。
Request Sample TEGO® AddBond LP 1611 Evonik Operations GmbH, BL Coating Additives TEGO® AddBond LP 1611是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性,防腐蚀,并提供光泽性。这款产品提供出色的铝、钢材、镀锌钢以及塑料、PVC和ABS表面的粘度。它鬼将用于罐头及卷材涂料和工业涂料等。
Ultrafine™ 1000 A Lawter Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...展开 Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. 收起
Ultrafine™ 1WLS A Lawter Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...展开 Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 收起