UL Prospector

成功!

成功保存搜索结果
4870-M-70 Alkyd Resin Gabriel Performance Products 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...展开 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 收起
4962-M-75 Rosin Modified Epoxy Ester Resin Gabriel Performance Products 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...展开 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 收起
4983-BA-70 High Solids Epoxy Ester Resin Gabriel Performance Products 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance.
4987-V-60VT Modified Alkyd Resin Gabriel Performance Products 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal.
AB-30F Quaker Color (a Division of McAdoo & Allen, Inc.) AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, ...展开 AB-30F is NMP free aliphatic urethane dispersion with low temperature flexibility and good hydrolysis resistance and is used as a modifier in coatings to improve flexibility. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more. 收起
AB-72FD Quaker Color (a Division of McAdoo & Allen, Inc.) AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more.
AB-91F Quaker Color (a Division of McAdoo & Allen, Inc.) AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more.
Request Sample ACRONAL® PRO 770 BASF Dispersions & Resins ACRONAL® PRO 770 is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONALPRO 770 shows outstanding anti-corrosi...展开 ACRONAL® PRO 770 is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONALPRO 770 shows outstanding anti-corrosive properties both in glossy DTM and matte monocoat/ primer applications without or with only limited addition of phosphate anticorrosive pigments. 收起
AD-4000L Chan Sieh Enterprises Co, Ltd. AD-4000L is an ethylene vinyl acetate copolymer adhesive resin in the form of a white emulsion. This product features good heat resistance and excellent bonding strength with PVC sheet. It can be used as an adhesive for aluminum foil and paper, and in t...展开 AD-4000L is an ethylene vinyl acetate copolymer adhesive resin in the form of a white emulsion. This product features good heat resistance and excellent bonding strength with PVC sheet. It can be used as an adhesive for aluminum foil and paper, and in the lamination of PVC sheet and plywood. 收起
AR-511 Chan Sieh Enterprises Co, Ltd. AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...展开 AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. 收起
AR-518 Chan Sieh Enterprises Co, Ltd. AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters.
AROLON® 845-W-45 Polynt Composites AROLON® 845-W-45, in the form of an opaque, white liquid, is a thermoplastic styrene acrylic emulsion designed for air-dry topcoats and primers, as well as coatings for metal and plastics. This product dries quickly, with good gasoline, chemical, solvent,...展开 AROLON® 845-W-45, in the form of an opaque, white liquid, is a thermoplastic styrene acrylic emulsion designed for air-dry topcoats and primers, as well as coatings for metal and plastics. This product dries quickly, with good gasoline, chemical, solvent, corrosion, and water or humidity resistance. 收起
AROLON® 847-W-42 Polynt Composites AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cur...展开 AROLON® 847-W-42, in the form of a milky white, styrenated acrylic emulsion, is a resin that can be used in air-dry, force dry enamels, and baking topcoats for metals and plastics, primers, industrial maintenance direct-to-metal-coatings, and concrete cures and sealers. This product offers water-sport resistance, chemical resistance, and good adhesion to concrete and metal. It can also offer good corrosion resistance with inhibitive pigment stability. 收起
AROLON® 860-W-45 Polynt Composites AROLON® 860-W-45, in the form of an opaque, white liquid, is an acrylic copolymer emulsion designed for primer and topcoat use on concrete and sealers, air-dry, force-dry, or baking primers for plastics and metals, and topcoats for plastics and metals. Th...展开 AROLON® 860-W-45, in the form of an opaque, white liquid, is an acrylic copolymer emulsion designed for primer and topcoat use on concrete and sealers, air-dry, force-dry, or baking primers for plastics and metals, and topcoats for plastics and metals. This product is resistant to gasoline, chemicals, solvents, and stains after it has been cross-linked. 收起
AROPLAZ® 6749-XA6-90 Polynt Composites AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture a...展开 AROPLAZ® 6749-XA6-90 is a high-solids, saturated polyester resin. This product develops hard films with good flexibility when crosslinked with aminoplast resins. It can be used in coatings for small appliance enamels, and in metal coatings for furniture and equipment. 收起
Request Sample Acronal® PRO 761 BASF Dispersions & Resins Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corro...展开 Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corrosion protection pigments and extenders allows systems to be formulated with outstanding corrosion protection properties.This product is recommended for applications such as interior/exterior general industrial metal coating applications and industrial maintenance applications. 收起
Akuapol AL 2200 T&L Co., Ltd. Polymer Technology Centre Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings.
Akuapol AL 2300 T&L Co., Ltd. Polymer Technology Centre Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings.
Akuapol AL 2400 T&L Co., Ltd. Polymer Technology Centre Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings.
Akuapol AL 4500 T&L Co., Ltd. Polymer Technology Centre Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings.
Aliphatic Urethane Acrylate SU 512 Soltech Ltd Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings...展开 Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings, plastic coatings, and ink. Aliphatic Urethane Acrylate SU 512 is 85% polymer solid by weight with a mPa.s viscosity of 3,000-5,000 at 60℃. 收起
Aliphatic Urethane Acrylate SU 5225 Soltech Ltd Aliphatic Urethane Acrylate SU 5225 is a di-functional aliphatic urethane acrylate oligomer containing isobonyl acrylate monomer that is designed to provide toughness, flexibility, adhesion, durability, and high elongation. This product is commonly used i...展开 Aliphatic Urethane Acrylate SU 5225 is a di-functional aliphatic urethane acrylate oligomer containing isobonyl acrylate monomer that is designed to provide toughness, flexibility, adhesion, durability, and high elongation. This product is commonly used in applications such as cork coatings, metal coatings, plastic coatings, and wood fillers, and . Aliphatic Urethane Acrylate SU 5225 is 70% polymer solid by weight with an mPa.s viscosity of 20,000-50,000 at 60℃. 收起
Aliphatic Urethane Acrylate SU 5270 Soltech Ltd Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigmen...展开 Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigment coatings for wood, and screen inks. Aliphatic Urethane Acrylate SU 5270 is 100% polymer solid by weight with an mPa.s viscosity of 7,000-11,000 at 25℃. 收起
Aliphatic Urethane Acrylate SU 542 Soltech Ltd Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings,...展开 Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 542 is 100% polymer solid by weight with a mPs.s viscosity of 500-1,000 at 60℃. 收起
Aliphatic Urethane Acrylate SU 543 Soltech Ltd Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, ...展开 Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 543 is 100% polymer solid by weight with a mPs.s viscosity of 100-300 at 60℃. 收起
Aliphatic Urethane Acrylate SU 580 Soltech Ltd Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...展开 Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. 收起
Aliphatic Urethane Acrylate SU 584 Soltech Ltd Aliphatic Urethane Acrylate SU 584 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, and light color. This product is commonly used in applications such as pigment coatings for wood, metal coat...展开 Aliphatic Urethane Acrylate SU 584 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, and light color. This product is commonly used in applications such as pigment coatings for wood, metal coatings, plastic coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 584 is 88% polymer solid by weight with an mPa.s viscosity of 1,500-2,500 at 60℃. 收起
Altor™ 200 Polyaspartic Ester Cargill Industrial Specialties Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings.
Altor™ 201 Polyaspartic Ester Cargill Industrial Specialties Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings.
Altor™ 202 Polyaspartic Ester Cargill Industrial Specialties Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials.
Altor™ 205 Polyaspartic Ester Cargill Industrial Specialties Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...展开 Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. 收起
Aluminum Primer/B3320 Tianjin Boyuan New Materials Co., Ltd. Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film.
Arobras™ 1767 ASK Chemicals Arobras™ 1767 is a thermosetting resin used for modifying alkyd resins. It has excellent compatibility with alkyd resins.
BECKOSOL® 1272 Polynt Composites BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be ...展开 BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be used as a modifier for exterior house paints. This product has good wetting properties and displays zinc oxide stability. It can readily be emulsified into latex paint formulations. 收起
BECKOSOL® 3758-M-85 Polynt Composites BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. I...展开 BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. It can also be used to modify alkyd resins. If one mixes this product in a cold blend with resins, the end product will create an exterior coating system with high durability and chemical resistance. 收起
BECKOSOL® 6422-K3-75 Polynt Composites BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construct...展开 BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construction equipment finishes, among other uses. This product dries tack-free in two hours and provides good color and color retention. It has strong water-spot, humidity, and salt spray resistance and will retain gloss in exterior exposures. 收起
BENASOL L 50 AV Benasedo BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起
BYD-1318 Tianyi Chemical Engineering Material Co., Ltd. BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...展开 BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 收起
BYD2640 Tianyi Chemical Engineering Material Co., Ltd. BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...展开 BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起
BYD7630 Tianyi Chemical Engineering Material Co., Ltd. BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...展开 BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. 收起
Request Sample Basonat® HB 275 B BASF Dispersions & Resins Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical pro...展开 Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical properties, and non-yellowing. Basonat® HB 275 B is used to formulate lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or plastics. 收起
Benester 742 Benasedo Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance.
Bluepur 3037 S.A.P.I.C.I. SpA Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne system...展开 Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne systems. 收起
Bluepur 3080 S.A.P.I.C.I. SpA Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1...展开 Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1K or 2K waterborne systems. 收起
CF1-141 NuSil Silicone Technology 1 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起
CF2-135 NuSil Silicone Technology 1 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起
CF6-135 NuSil Silicone Technology 1 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起
CH-4900 Silicon Structural Sealant Yangzhou Chenhua New Material CO., LTD. CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...展开 CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 收起
CH-5800 Insulating Glass Sealant Yangzhou Chenhua New Material CO., LTD. CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...展开 CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 收起
CH-5900 Silicon Structural Sealant Yangzhou Chenhua New Material CO., LTD. CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...展开 CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 收起
CHS-Alkyd AKS 281 X 60 Spolchemie CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...展开 CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. 收起
CHS-Alkyd AL 3220 Spolchemie CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...展开 CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. 收起
CHS-Alkyd LUR 740 NN 80 Spolchemie CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. 收起
CHS-Alkyd S 401 X 55 Spolchemie CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...展开 CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. 收起
CHS-Alkyd S 401 X 60 Spolchemie CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...展开 CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. 收起
CHS-Alkyd S 471 X 60 Spolchemie CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...展开 CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. 收起
CHS-Alkyd S 491 WB 55 Spolchemie CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...展开 CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. 收起
CHS-Alkyd S 618 W 80 Spolchemie CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...展开 CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. 收起
CHS-Alkyd S 621 W 60 Spolchemie CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...展开 CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 收起
CHS-Alkyd S 622 W 55 Spolchemie CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...展开 CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. 收起
CHS-Alkyd S 652 NN 70 Spolchemie CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...展开 CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起
CHS-Alkyd S 653 W 70 Spolchemie CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...展开 CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起
CHS-Alkyd S 670 NN 75 Spolchemie CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...展开 CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. 收起
CHS-Alkyd SUR 735 NN 80 Spolchemie CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....展开 CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. 收起
CHS-Alkyd TRI 841 Spolchemie CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...展开 CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. 收起
CHS-Alkyd TU 341 X 60 Spolchemie CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...展开 CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. 收起
CHS-Alkyd TU 497 X 55 Spolchemie CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...展开 CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. 收起
CHS-Alkyd Trim 551 W 85 Spolchemie CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...展开 CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. 收起
CHS-Epoxy 160 V 55 Spolchemie CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied ...展开 CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 1040. 收起
CHS-Epoxy 200 V 55 Spolchemie CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to ...展开 CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 180. 收起
CHS-Epoxy 210 X 75 Spolchemie CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance t...展开 CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primers, baking coating, paints for heating oil tanks, penetrates of concrete, treatment of wood and metal surfaces. 收起
CHS-Epoxy 222 IX 60 Spolchemie CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It come...展开 CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It comes from a solution that is 60% in a blend of solvents including isobutanol and xylene. This product is primarily used for producing anticorrosion paints for marine, railway, gas industries. This product can also be used for wood floor toppings and different metal surfaces exclusively intended for interior use. 收起
CHS-Hydrospol D 01 Spolchemie CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is p...展开 CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is primarily used for several different types of water-soluble air-drying coating s for interior and exterior. This product is as a steel anticorrosion primer for metals and stain for woods. 收起
CHS-Hydrospol D 101 Spolchemie CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for t...展开 CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for this product is estimated to be around 27%. CHS-Hydrospol D 101 is primarily used for waterborne air-drying coatings for interior and exterior uses. This product is used on metal and wood surfaces. 收起
CHS-Hydrospol D 401 Spolchemie CHS-Hydrospol D 401 is a binder with improved flexibility for waterborne low yellowing solvent free coatings. This product is made up of 45% water; it is VOC free and a urethane dispersal of soybean oil. It is free of any organic solvents. CHS-Hydrospol D...展开 CHS-Hydrospol D 401 is a binder with improved flexibility for waterborne low yellowing solvent free coatings. This product is made up of 45% water; it is VOC free and a urethane dispersal of soybean oil. It is free of any organic solvents. CHS-Hydrospol D 401 is primarily used for coatings on interiors and exteriors and is intended to coat metal and wood surfaces. 收起
CN104A60 Sartomer Americas 双官能双酚A环氧丙烯酸脂与40%SR306、三聚丙二醇二丙烯酸脂的混合物。具备良好的水分性能和高活性之间的平衡性。基础低聚物CN104,赋予Sartomers双酚A环氧丙烯酸脂最浅的颜色。
CN294E Sartomer Americas CN294E是一种四官能团丙烯酸酯聚酯齐聚物。CN294E可用于UV固化涂料和油墨,包括苯胺印刷、丝网印刷和平版印刷油墨
CN299 Sartomer Americas 它是一种四官能丙烯酸酯聚酯低聚物,用于UV固化涂料和油墨,包括柔印、丝印和平印油墨。其特点是快速固化响应、良好的平印性能、良好的颜料润湿性和憎水/亲水平衡。
CN821 Sartomer Americas CN821 is a unique acrylic oligomer that will enhance adhesion to non-porous substrates. The oligomer is very low in color, allowing it to be used on white and light colored substrates. It is hydrophobic and has low odor, good water resistance, high impact...展开 CN821 is a unique acrylic oligomer that will enhance adhesion to non-porous substrates. The oligomer is very low in color, allowing it to be used on white and light colored substrates. It is hydrophobic and has low odor, good water resistance, high impact strength, and is solvent resistance. Some suggested applications of CN821 are laminating adhesives, streolithography, metal and plastic coatings, and flexo, screen, inkjet, and rotary screen inks. 收起
CN9013 Sartomer Americas CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkag...展开 CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkage, and high hardness. CN9013's suggested applications are for wood, plastic, metal, floor, and other abrasion resistant coatings. 收起
CN9024 Sartomer Americas CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoe...展开 CN9024 is a clear liquid, aliphatic urethane acrylate that will yield flexible films with high modulus upon free radical polymerization. This product generally has good adhesion to polymer and metal substrates due to its low shrinkage and favorable viscoelastic properties. CN9024 has utility in a number of different applications including laminating and pressure sensitive adhesives, metal, plastic, and wood coatings, as well as flexo, litho, offset, screen, rotary screen, and letterpress inks. 收起
CN9025 Sartomer Americas CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot...展开 CN9025 is a highly functional aliphatic urethane acrylate designed for use in hard coats or where additional cross linking is necessary. The oligomer does not contain PETA, making it a desirable choice for applications where that particular monomer cannot be used. CN9025 has high hardness and scratch resistance. It also has good water resistance, solvent resistance, and high impact strength. It is used for glass, metal, and plastic coatings as well as flexo, litho, rotary screen, and inkjet inks. 收起
CN9167US Sartomer Americas
CV-2680-12 NuSil Silicone Technology 1 CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. ...展开 CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. easy clean-up, and consistent bond thickness. 收起
Cinergi™ 2018 A Lawter Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensure...展开 Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensures the finished ink keeps desired properties while countering tarnishing. Its flexibility allows Cinergi™ 2018 A to be adaptable to a variety of metallic applications including sheet-fed inks. 收起
Coronate® 2030 Tosoh Corporation Coronate® 2030 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2031 Tosoh Corporation Coronate® 2031 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2050 Tosoh Corporation Coronate® 2050 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2067 Tosoh Corporation Coronate® 2067, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it c...展开 Coronate® 2067, in the form of a pale yellow liquid, is a polyisocyanate that has been modified with multifunctional alcohols and is used as a cross-linker for reactive coatings. When combined with other polyols (acrylic resins, polyester, or epoxy), it can be applied in a wide range of coating fields, such as rubbers, metals, plastics, concrete, leather, and paper. 收起
Coronate® 2071 Tosoh Corporation Coronate® 2071 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2074 Tosoh Corporation Coronate® 2074 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2096 Tosoh Corporation Coronate® 2096 is a non-yellowing polyisocyanate containing HDI isocyanurate rings and modified with multifunctional alcohols. This product is ideal for use in coatings for rubber, metal, plastic, concrete, leather, and paper applications.
Coronate® 2232 Tosoh Corporation Coronate® 2232 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2233 Tosoh Corporation Coronate® 2233 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2255 Tosoh Corporation Coronate® 2255 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2257 Tosoh Corporation Coronate® 2257 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks.
Coronate® 2507 Tosoh Corporation Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
Coronate® 2513 Tosoh Corporation Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
Coronate® AP-M Tosoh Corporation Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...展开 Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起
Coronate® BI-301 Tosoh Corporation Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals...展开 Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. 收起