| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| BECKOSOL® 1272 | Polynt Composites | BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be ...展开 BECKOSOL® 1272 is a 100% solids, long-oil, soy alkyd that can be used in house paints (both conventional, as well as stain- and blister-resistant types), trim paints, structural steel primers, and lithographic or letterpress printing inks. It can also be used as a modifier for exterior house paints. This product has good wetting properties and displays zinc oxide stability. It can readily be emulsified into latex paint formulations. 收起 | |
| BECKOSOL® 3758-M-85 | Polynt Composites | BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. I...展开 BECKOSOL® 3758-M-85, in the form of a clear liquid, is a phenolic-modified drying oil that can be used in direct production of coating vehicles without cooking, such as clear exterior finishes, aluminum paints, metal primers, coatings, and floor paints. It can also be used to modify alkyd resins. If one mixes this product in a cold blend with resins, the end product will create an exterior coating system with high durability and chemical resistance. 收起 | |
| BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...展开 BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| EPS® 2843 | EPS Materials | EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...展开 EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. 收起 | Request Sample |
| JONCRYL® 1532 | BASF Dispersions & Resins | Joncryl® 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity condition...展开 Joncryl® 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions. This product exhibits low VOC capability. 收起 | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...展开 L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 收起 | |
| RAYKOTE® 1446G | Specialty Polymers, Inc. | RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for pr...展开 RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for primer applications. 收起 | |
| Razeen® LR 2280 | Jubail Chemical Industries Co. | Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied seal...展开 Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied sealer lacquers, and primers and finishing paints for metal substrates. 收起 | |
| SETAQUA® 37-1371 | Allnex | SETAQUA® 37-1371 (formerly SETAQUA 6471) is a fine particle size, styrene-acrylic resin emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. It is used in anti-corrosive coatings of rel...展开 SETAQUA® 37-1371 (formerly SETAQUA 6471) is a fine particle size, styrene-acrylic resin emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. It is used in anti-corrosive coatings of relatively low PVC as well as superior adhesion to new galvanized iron. This product is suitable for anti-corrosive coatings, metal maintenance coatings, and galvanized iron primers. 收起 | Request Sample |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...展开 SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. 收起 | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...展开 SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. 收起 | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...展开 SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. 收起 | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...展开 SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. 收起 | |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It i...展开 Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. 收起 | |
| Unithane IC-950 NF | Union Specialties, Inc. | Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps...展开 Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer coat for concrete, graphic arts, automotive, metal, adhesives, and paints. 收起 | |
| Unithane IC-953 CP | Union Specialties, Inc. | Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed...展开 Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer coat for concrete, automotive, metal, graphic arts, adhesives, and flooring coatings. 收起 | |
| WorléeCryl® 7120 | Worlée-Chemie G.m.b.H. | 苯丙共聚物乳液。用作不同金属(例如铁和铝)的防腐蚀底漆，具有良好的耐侯性。 |
