1- Or 2-Component Wash Primer (Formulation #4.1.1) | GRACE | 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beck...展开 1- Or 2-Component Wash Primer (Formulation #4.1.1) is a guideline formulation used to exhibit the equivalent performance for SHIELDEX® anti-corrosive pigments compared to a commercial wash primer based on zinc tetroxychromate. The modified epoxy resin Beckopox EM 460 is recommended in combination with the standard polyvinylbutyral resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium. The formulation can also be used as a one-component system. In this case, Part B is premixed and subsequently added to part A after dispersion. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 – 15 microns by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. 收起 | |
2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) | GRACE | 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination wit...展开 2-Component Wash Primer With Improved Adhesion (Formulation #4.1.2) is a guideline formulation offered to illustrate the key features of SHIELDEX® AC 3 Anti-Corrosive Pigment. Beckopox EM 460 together with Phenodur PR 263 is recommended in combination with the standard resin Mowital B 30 H to ensure good wet adhesion properties. Silquest A 187 Silane promotes wet adhesion properties especially on galvanised steel and aluminium substrates. The combination of Alcophor 827 with SHIELDEX® anti-corrosive pigments improves hot salt spray resistance over steel substrates. After mixing the two components and letting these prereact for a minimum of 30 minutes, the formulation was tested on solvent degreased cold rolled steel, galvanised steel and aluminium substrates applied to a dry film thickness of 10 –15 μm by bar coater. The formulation was also tested with a 40 micron acrylic/isocyanate top coat. Drying was for 7 days at ambient conditions. 收起 | |
Anti-Corrosion Primer for High Requirements (Formulation #407-04) | Hoffmann Mineral | 符合高要求的防腐底漆(#407-04配方),含SILLITIN Z 86 | |
Anti-Corrosion Primer for High Requirements (Formulation #R 24403 C) | Hoffmann Mineral | 符合高要求的防腐底漆(#R 24403 C配方),含AKTIFIT AM | |
Anti-Corrosion Primer for High Requirements (Formulation #R 24403 D) | Hoffmann Mineral | 符合高要求的防腐底漆(#R 24403 D配方),含AKTISIL PF 777 | |
Anti-Corrosion Primer for High Requirements (Formulation #R24403 A) | Hoffmann Mineral | 符合高要求的防腐底漆(#R24403 A配方),含SILLITIN Z 86 | |
Anti-Corrosion Primer (Formulation #R 24301.1) | Hoffmann Mineral | 防腐底漆(#R 10402 ABC配方),含AKTIFIT AM 和 AKTISIL MM 和 AKTISIL PF 777 | |
Coil Coating Primer (Formulation #T 24402.1) | Hoffmann Mineral | 卷刚涂料底漆 (配方#T 24402.1),含AKTIFIT AM和 SILLITIN Z 89 | |
Coil Coating Topcoat (Formulation #T 24401.1 B) | Hoffmann Mineral | 卷刚涂料面漆 (配方#T 24401.1 B) ,含AKTIFIT AM | |
Coil Coating Topcoat (Formulation #T 24401.1A) | Hoffmann Mineral | 卷刚涂料面漆 (配方#T 24401.1),含SILLITIN Z 89 | |
Nubirox 106 in SB 2K Epoxy Primer (Formulation #EPPA 16711) | Ferro Pigments | This epoxy primer features Nubirox 106. | |
Nubirox 106 in SB Alkyd Primer (Formulation #AC 10433) | Ferro Pigments | This alkyd primer features Nubirox 106. | |
Nubirox 213 in SB 2K Epoxy-Polyamide Primer (Formulation #EPPA 12883) | Ferro Pigments | This SB 2K epoxy-polyamide primer features Nubirox 213. | |
Nubirox 302 in SB 2K Epoxy-polyamide Primer (Formulation #EPPA19852) | Ferro Pigments | This SB 2K Epoxy-polyamide Primer features Nubirox 302. | |
Nubirox 302 in Solvent Based DTM Alkyd System (Formulation #AC 19630) | Ferro Pigments | This solvent based DTM alkyd system features Nubirox 302. | |
Nubirox SP in SB Alkyd Primer (Formulation #AC 10430) | Ferro Pigments | This SB Alkyd Primer features Nubirox SP. | |
Organic Zinc Rich Primer | Huntsman Performance Products | 富锌底漆、开发用于保护钢结构,用作施工前底漆或作为面涂底漆,具有出色的耐腐蚀性能 |