| A-Cat 0040 | FTC Korea Co.,Ltd | A-Cat 0040 has excellent stability in solvent soluble and water-based thermosetting system, low temperature cure, and a fast cure time. It is used in general industries coatings. | Request Sample |
| A-Cat 1050 | FTC Korea Co.,Ltd | A-Cat 1050 has excellent water and overbake resistance. Its application is of high temperature and can be used in printing inks, general industries coatings, and coil and can coatings. | Request Sample |
| A-Cat 1550 | FTC Korea Co.,Ltd | A-Cat 1550 is an excellent water, and salt spray with low conductivity for electrostatic. It is suitable for use in painting inks, coil coatings, industries coatings, can coatings, and waterborne can coatings. | Request Sample |
| ACRONAL® 4400 | BASF Dispersions & Resins | Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates...展开 Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates, improved asphalt-bleed resistance, retention of film elasticity after weathering, and higher solar reflectivity due to enhanced dirt pick-up resistance. Further, Acronal® 4400 - when combined with BASF’s Quick-Trigger 4333 additive - delivers early rain resistance under even the most challenging weather conditions. Acronal® 4400 was value engineered to provide environmental benefits in zinc-free roof coating formulations and comply with the performance parameters of ASTM D 6083 & California Title 24 protocols. 收起 | |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AF-066 | FTC Korea Co.,Ltd | AF-066 is an excellent leveling agent and is highly effective at defoaming. It has good balance between effectiveness and compatibility. It is suitable for use in general industrial coating, wood and furniture coatings, printing inks, and architectural co...展开 AF-066 is an excellent leveling agent and is highly effective at defoaming. It has good balance between effectiveness and compatibility. It is suitable for use in general industrial coating, wood and furniture coatings, printing inks, and architectural coatings. 收起 | Request Sample |
| AF-550 | FTC Korea Co.,Ltd | AF-550 is an excellent defoaming and leveling agent. It has good gloss and gloss retention with excellent visual clarity. It is suitable for use in PCM coating, flooring coatings, and general industrial coatings. | Request Sample |
| AF-900 | FTC Korea Co.,Ltd | AF-900 is an excellent defoaming and leveling agent. It has good gloss and gloss retention. It is suitable for use in PCM coating, flooring coating, and general industrial coating. | Request Sample |
| Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
| Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
| Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Altor™ 205 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...展开 Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. 收起 | |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...展开 ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| ASCONIUM® 110 | GSI Exim America, Inc. | ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be...展开 ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be used in any type of liquid metal coating for industrial or do-it-yourself use. For in-can corrosion protection, it can also be used in waterborne or solventborne systems, like strippers, glues, degreasers etc. 收起 | |
| ASCONIUM® 111 | GSI Exim America, Inc. | ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...展开 ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 112 | GSI Exim America, Inc. | ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...展开 ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 114 | GSI Exim America, Inc. | ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...展开 ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 140 | GSI Exim America, Inc. | ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...展开 ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 141 | GSI Exim America, Inc. | ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...展开 ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 142DA | GSI Exim America, Inc. | ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...展开 ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 143 | GSI Exim America, Inc. | ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...展开 ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCONIUM® 144DA | GSI Exim America, Inc. | ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...展开 ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 收起 | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...展开 ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| B-Cat 0019 | FTC Korea Co.,Ltd | B-Cat 0019 has high temperature application and excellent humidity and detergent resistance. It is suitable for use in coil coatings, metal decorating, general industrial coating, electrostatic sprays, and electro coatings. | Request Sample |
| B-Cat 0023 | FTC Korea Co.,Ltd | B-Cat 0023 has high temperature application and excellent humidity and detergent resistance. It is suitable for use in coil coatings, metal decorating, general industrial coatings, electrostatic sprays, and electro coatings. | Request Sample |
| B-Cat 0025K | FTC Korea Co.,Ltd | B-Cat 0025K is has broad solubility and good exterior durability. It offers excellent viscosity stability and good flow and leveling. It is suitable for use in automotive topcoats, general industrial coatings, coil and can coatings, and paper coating. | Request Sample |
| B-Cat 0067 | FTC Korea Co.,Ltd | B-Cat 0067 has excellent solubility characteristics and is useful with polymeric melamines and phenolic resins. It has good water resistance. It is suitable for use in coil and can coatings, paper coatings, and general industrial coatings. | Request Sample |
| B-Cat 3025 | FTC Korea Co.,Ltd | B-Cat 3025 has an application temperature that is low. It has high gloss and excellent stability in waterborne and high solid systems. It is suitable for use in coil and can coatings, general industrial coatings, paper coatings, and printing inks. | Request Sample |
| B-Cat 3026 | FTC Korea Co.,Ltd | B-Cat 3026 is a catalyst with excellent stability in waterborne and high solid systems, high gloss, and has an application of low temperature. It is suitable for use in coil, can, and wood coatings, general industries, paper coating, and printing inks. | Request Sample |
| B-Cat 3028 | FTC Korea Co.,Ltd | B-Cat 3028 is a catalyst with excellent cure response and viscosity stability and application of low temperature. It is suitable for use in coil, can, and wood coatings, general industries, paper coatings, and printing inks. | Request Sample |
| B-Cat 4047 | FTC Korea Co.,Ltd | B-Cat 4047 has excellent water, salt spray, and detergent resistance. There is a low temperature reaction time and good gloss and gloss retention. It is suitable for use in coil coatings, metal decorating, and general industrial coatings. | Request Sample |
| B-Cat 4910 | FTC Korea Co.,Ltd | B-Cat 4910 has excellent adhesion and good humidity and salt spray resistance. It is suitable for use in coil and can coatings, electrostatic spraying, automotive primers, and electro coatings. | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...展开 Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. 收起 | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| BYK-1616 | BYK | BYK-1616 is a silicone-containing defoamer for aqueous printing inks and overprint varnishes, as well as aqueous wood and furniture coatings and general industrial coatings. | Request Sample |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | Request Sample |
| BYK-3540 | BYK | BYK-3540 is a silicone- and APEO-free leveling additive for automotive and industrial coatings, especially ED coatings, used to avoid surface defects with a simultaneous defoaming effect. | Request Sample |
| BYK-3568 | BYK | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | Request Sample |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...展开 DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. 收起 | Request Sample |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| DISPEX® Ultra PA 4590 | BASF Formulation Additives | DISPEX® Ultra PA 4590 is ideal for water-based industrial and decorative coatings where cost-effective performance is vital; suitable for making universal colorants with good compatibility. | |
| Docure KH-831 | Kukdo Chemical Co., Ltd. | Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with goo...展开 Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with good weathering resistance. 收起 | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...展开 Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. 收起 | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...展开 Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起 | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...展开 ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. 收起 | |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...展开 ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. 收起 | |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...展开 ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. 收起 | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...展开 ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. 收起 | |
| Epitex-C-9901-21-50 | US Polymers - Accurez LLC | Epitex-C-9901-21-50 is a siliconized epoxy ester supplied at 50 percent solids in a solvent combination of xylene and VM&P Naphtha. It is suggested for use in air-dry and forced dried industrial and industrial maintenance applications. Those include rust ...展开 Epitex-C-9901-21-50 is a siliconized epoxy ester supplied at 50 percent solids in a solvent combination of xylene and VM&P Naphtha. It is suggested for use in air-dry and forced dried industrial and industrial maintenance applications. Those include rust inhibitive primers, zinc-rich primers, enamels and clear coats for optimum performance in a single package system. 收起 | Request Sample |
| Epokukdo KB-560 | Kukdo Chemical Co., Ltd. | Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展开 Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-562P | Kukdo Chemical Co., Ltd. | Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...展开 Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo KB-563P | Kukdo Chemical Co., Ltd. | Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...展开 Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 收起 | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| FAP-100 | FTC Korea Co.,Ltd | FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industr...展开 FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industrial coatings, and silk screen inks. 收起 | Request Sample |
| FAP-200 | FTC Korea Co.,Ltd | FAP-200 has excellent adhesion to most metal substrates, improved flexibility, and improved corrosion resistance. It is suitable for use in coil and can coatings, automotive coatings, and industrial coatings. | Request Sample |
| FDA-163 | FTC Korea Co.,Ltd | FDA-163 has increased pigment concentration to reduce flooring problems and lower viscosity. It is suitable for use in coil coatings, general industrial coatings, and automotive coatings. | Request Sample |
| FDA-360 | FTC Korea Co.,Ltd | FDA-360 has increased pigment concentration, improved theological characteristics, and improved stability. It is suitable for use in coil coatings, general industrial coatings, and automotive coatings. | Request Sample |
| Ficonate-60X | FTC Korea Co.,Ltd | Ficonate-60X has good chemical and physical properties with good durability and weatherability. It is suitable for use as a hardener for automotive coatings and general industrial coatings. | Request Sample |
| Graph'Up W3 | CARBON WATERS | Graph'Up W3 is a ready-to-use additive boosting anti-corrosion, UV resistance, anti-scratch, and anti-clogging performance of waterbased formulations. | |
| Hydrite® R-A | Imerys Performance Additives | Hydrite®R-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for solvent and water based coatings, inks, polymer & rubber applications. | |
| Hydrite™ SB 60 | Imerys Performance Additives | Hydrite™ SB 60 is an fine stain resistance additive specifically designed to provide optimum barrier performance in solvent & water based coating applications. | |
| Hydrite™ SB 60S | Imerys Performance Additives | Hydrite™ SB 60S is an ultra fine stain resistance additive specifically designed to provide optimum performance in water based barrier coating applications. | |
| LA-346 | FTC Korea Co.,Ltd | LA-346 has a reduction of the surface tension, improved substrate wetting and leveling, and does not increase surface slip. IT is suitable for use in aqueous coatings, printing inks, and general industrial coatings. | Request Sample |
| LA-45 | FTC Korea Co.,Ltd | LA-45 has excellent leveling and defoaming agent. It has good floor, gloss, and gloss retention. It is suitable for use in PCM coating, flooring coating, and general industrial coatings. | Request Sample |
| LA-460 | FTC Korea Co.,Ltd | LA-460 has excellent leveling agent properties as well as flow promotion. It has slip effects and anti-crater effects. It is suitable for use in PCM coatings, flooring coatings, and general industrial coatings. | Request Sample |
| LA-480 | FTC Korea Co.,Ltd | LA-480 has excellent leveling agent properties with improved surface quality and anti-crater effect. It is suitable for use in PCM coating, automotive coatings, and general industrial coatings. | Request Sample |
| LA-52 | FTC Korea Co.,Ltd | LA-52 has excellent compatibility in most binders and excellent leveling for coatings. It is suitable for use as a leveling additive for solvent-based coating and industrial coatings. | Request Sample |
| LUNA-FLEX MP15-H | DKSH | LUNA-FLEX MP15-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...展开 LUNA-FLEX MP15-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. 收起 | Request Sample |
| Microspersion® 400SM-40 | Micro Powders, Inc. | Microspersion® 400SM-40 is a nonionic water based dispersion of spherical submicron PTFE. | |
| NatureFine R331 | Micro Powders, Inc. | NatureFine R331 is a finely micronized rice bran wax for use in industrial coatings and agrochemical products. | |
| PAP-700 | FTC Korea Co.,Ltd | PAP-700 has excellent adhesion to plastic substrates and boiling water resistance. It has good chemical properties with good compatibility when used with other resins such as CAB and CPO. It is fast drying and suitable for use in general industrial coatin...展开 PAP-700 has excellent adhesion to plastic substrates and boiling water resistance. It has good chemical properties with good compatibility when used with other resins such as CAB and CPO. It is fast drying and suitable for use in general industrial coatings and automotive coatings. 收起 | Request Sample |
| PolyGlide 1226XF | Micro Powders, Inc. | PolyGlide 1226XF is a highly engineered HDPE/ceramic composite for abrasion resistance and lubricity. | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...展开 Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. 收起 | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...展开 Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. 收起 | |
| Resiflow® 2N | Estron Chemical, Inc. | Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in...展开 Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in the pigment dispersion prior to letdown, Resiflow® 2N may alleviate pigment floating and foam formation. The product is suitable for use in acrylic, alkyd, epoxy, polyester, and other industrial coatings systems. 收起 | |
| Resiflow® 3N | Estron Chemical, Inc. | Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow...展开 Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow® 3N is beneficial in alleviating brush and roller marks, picture framing, edge pull and sagging, as well as promoting a uniform, level surface. 收起 | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...展开 Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. 收起 | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...展开 Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. 收起 | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...展开 Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. 收起 | |
| Rhenogran® DOTG-70 | Rhein Chemie Rheinau GmbH | Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the r...展开 Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic rubbers requiring mechanical properties and aging resistance. Rhenogran® DOTG-70 finds application in roller coverings and cable sheathing. 收起 | |
| Sunmide® 153-60S Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 153-60S Curing Agent is a solution of high molecular weight polyamide resin. It is ideal for use in industrial maintenance coatings, industrial flooring, and general purpose epoxy coatings. | Request Sample |
| Sunmide® 305-70X Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 305-70X Curing Agent is a polyamide amine widely used as a room temperature curing agent of epoxy resins in solvent-based protective coatings. When used with solid epoxy resin, Sunmide® 305-70X has good adhesion, high flexibility, long pot life a...展开 Sunmide® 305-70X Curing Agent is a polyamide amine widely used as a room temperature curing agent of epoxy resins in solvent-based protective coatings. When used with solid epoxy resin, Sunmide® 305-70X has good adhesion, high flexibility, long pot life and all around good properties. It is ideal for use in solvent-based protective coatings, industrial maintenance coatings, and marine coatings. 收起 | Request Sample |
| Superslip 6515AL | Micro Powders, Inc. | Superslip 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance. | |
| TEGO® Protect 5001 | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5001 is a hydroxy-functional silicone polyacrylate. | Request Sample |
| TEGO® Protect 5100 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5100 N is an emulsion of a hydroxyfunctional polydimethylsiloxane. | Request Sample |
| TEGO® VariPlus CA N | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus CA N shows excellent viscosity reduction and helps accelerate the drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance. | Request Sample |
| THIXATROL® P230X | Elementis | THIXATROL® P230X is a special polyamide wax dispersion, which prevents settling of pigments and fillers and improves sag resistance of solvent-based coatings. | Request Sample |
| UB-60X | FTC Korea Co.,Ltd | UB-60X has a low curing temperature and good storage stability. It can be used without a catalyst and as a base coat for bumpers, automotive primers, general industrial coatings, and can coatings. | Request Sample |
| UB-750 | FTC Korea Co.,Ltd | UB-750 can be used as the hardener in colorfast and weather stable, one component polyurethane coatings. The stoving temperature can be significantly reduced by the addition of a catalyst, e.g. dibutyltin dilaurate (DBTL), without reducing the storage sta...展开 UB-750 can be used as the hardener in colorfast and weather stable, one component polyurethane coatings. The stoving temperature can be significantly reduced by the addition of a catalyst, e.g. dibutyltin dilaurate (DBTL), without reducing the storage stability. The product is used in high grade industrial finishes (electrical appliances, small components, can coatings, coil coatings, etc.) and in primer surfacers and topcoats for automative finishing. 收起 | Request Sample |
| UB-75M | FTC Korea Co.,Ltd | UB-75M is a one-component polyurethane coating. The stoving temperature can be significantly reduced by the addition of a catalyst. It is used in conventional stoving systems to improve the flexibility and adhesion. It is suitable for use in automotive co...展开 UB-75M is a one-component polyurethane coating. The stoving temperature can be significantly reduced by the addition of a catalyst. It is used in conventional stoving systems to improve the flexibility and adhesion. It is suitable for use in automotive coatings and general industrial coatings. 收起 | Request Sample |
| Venadol™ 104 | Harcros Chemicals, Inc. | Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...展开 Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104 PG50 | Harcros Chemicals, Inc. | Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...展开 Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104BC | Harcros Chemicals, Inc. | Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 |
