| Boltorn™ P500 | Perstorp | Boltorn™ P500 is a clear liquid dendritic polyester/ether polyol blend with low viscosity. This product is a precursor for UV-curing acrylate oligomers with a relationship between viscosity, molecular weight and functionality. Boltorn™ P500 offers balance...展开 Boltorn™ P500 is a clear liquid dendritic polyester/ether polyol blend with low viscosity. This product is a precursor for UV-curing acrylate oligomers with a relationship between viscosity, molecular weight and functionality. Boltorn™ P500 offers balance between hardness and flexibility in plastic and protective hard coating applications. 收起 | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| DORSICOAT® PQK 7 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQK 7 is a broadcast sand for anti-slip surfaces and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICO...展开 DORSICOAT® PQK 7 is a broadcast sand for anti-slip surfaces and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQK 8 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQK 8 is a broadcast sand for anti-slip surfaces and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICO...展开 DORSICOAT® PQK 8 is a broadcast sand for anti-slip surfaces and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQK 9 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQK 9 is a broadcast sand for anti-slip surfaces and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICO...展开 DORSICOAT® PQK 9 is a broadcast sand for anti-slip surfaces and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQK B1 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQK B1 is a filler for epoxy resin mortars and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® pr...展开 DORSICOAT® PQK B1 is a filler for epoxy resin mortars and is compatible with EP / PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQK DF 100 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQK DF 100 is a multifunctional filler for self levelling systems and is compatible with EP/PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coati...展开 DORSICOAT® PQK DF 100 is a multifunctional filler for self levelling systems and is compatible with EP/PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQK DF 16 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQK DF 16 is a multifunctional filler for self levelling systems and is compatible with EP/PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coatin...展开 DORSICOAT® PQK DF 16 is a multifunctional filler for self levelling systems and is compatible with EP/PU binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQW DF 100 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQW DF 100 is a multifunctional filler for self levelling systems and is compatible with MMA/PMMA binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special co...展开 DORSICOAT® PQW DF 100 is a multifunctional filler for self levelling systems and is compatible with MMA/PMMA binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| DORSICOAT® PQW DF 16 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORSICOAT® PQW DF 16 is a multifunctional filler for self levelling systems and is compatible with MMA/PMMA binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coa...展开 DORSICOAT® PQW DF 16 is a multifunctional filler for self levelling systems and is compatible with MMA/PMMA binder systems. All sand based products are characterised by their high SiO2-content and are free from humidic substances. Due to their special coating, the DORSICOAT® products are almost dust-free when laying floor coatings systems. Therefore DORSICOAT® increases health and safety at the job site. 收起 | |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...展开 LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. 收起 | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. 收起 | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...展开 LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. 收起 | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 |
