ACLYN 295-A | Univar Solutions | ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carri...展开 ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. 收起 | Request Sample |
AquaBead® 270E | Micro Powders, Inc. | 阴离子/非离子蜡乳液,专门配制用于水性户外用着色剂、密封剂、油漆和涂料 | |
AquaBead® 325E | Micro Powders, Inc. | 阴离子蜡乳液,专门配制用于水性户外用着色剂、密封剂、油漆和涂料 | |
AquaBead® 425E | Micro Powders, Inc. | 阴离子/非离子蜡乳液,专门配制用于水性户外用着色剂、密封剂、油漆和涂料 | |
AquaBead® 519 | Micro Powders, Inc. | ||
AquaBead® 525E | Micro Powders, Inc. | ||
AquaBead® 525E-AM | Micro Powders, Inc. | AquaBead® 525E-AM is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance. | |
AquaBead® 916 | Micro Powders, Inc. | ||
AQUACER 1013 | BYK | AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes. | Request Sample |
AQUACER 1039 | BYK | AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks. | Request Sample |
AQUACER 1061 | BYK | AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper. | Request Sample |
AQUACER 1510 | BYK | AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds. | Request Sample |
AQUACER® 1547 | BYK | 基于氧化聚乙烯蜡(HDPE)的阴离子水性乳液,提高水性罐头涂料体系的表面性能。 | Request Sample |
AQUACER 2500 | BYK | AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance. | Request Sample |
AQUACER 3500 | BYK | AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | Request Sample |
AQUACER 494 | BYK | AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes. | Request Sample |
AQUACER 497 | BYK | AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip. | Request Sample |
AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | Request Sample |
AQUACER® 507 | BYK | 基于氧化聚乙烯蜡(HDPE)的阴离子水性乳液,提高水性车用涂料体系的表面性能。 | Request Sample |
AQUACER® 513 | BYK | 非离子水性乳液,基于一种氧化聚乙烯蜡(HDPE),提高水性油漆体系的表面性能,适用于印刷油墨。 | Request Sample |
AQUACER® 526 | BYK | 以水为载体的阴离子改性乙烯基-醋酸乙烯-共聚物蜡(EVA)乳液,适用于水性面漆和底漆。 | Request Sample |
AQUACER 527 | BYK | AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks. | Request Sample |
AQUACER 530 | BYK | AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks. | Request Sample |
AQUACER® 531 | BYK | 基于合成蜡和天然蜡混合物的非离子水性乳液,用于提高水性工业漆和印刷油墨的表面特性。 | Request Sample |
AQUACER 532 | BYK | AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems. | Request Sample |
AQUACER® 533 | BYK | 结合了蜡的阴离子水性乳液,用于提高水性体系的表面性能。 | Request Sample |
AQUACER® 537 | BYK | 结合了蜡的阴离子水性乳液,用于提高水性漆体系的性能。 | Request Sample |
AQUACER® 539 | BYK | 基于改性石蜡的非离子水性乳液,用于改善水性涂料的表面性能。 | Request Sample |
AQUACER 541 | BYK | AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings. | Request Sample |
AQUACER® 552 | BYK | 聚乙烯蜡(HDPE)的非离子水性乳液,提高水性漆的表面性能,适用于印刷油墨。 | Request Sample |
AQUACER 561 | BYK | AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems. | Request Sample |
AQUACER 570 | Univar Solutions | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...展开 AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. 收起 | Request Sample |
AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | Request Sample |
AQUACER 581 | BYK | AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts. | Request Sample |
AQUACER 582 | BYK | AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings. | Request Sample |
AQUACER® 593 | BYK | 改性聚丙烯蜡的非离子水性乳液,提高水性地板漆和地板上光剂的表面防护性。 | Request Sample |
AQUACER 597 | BYK | AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | Request Sample |
AQUACER® 840 | BYK | 氧化聚乙烯蜡(HDPE)的阳离子水性乳液,用来提高水性体系的表面性质。 | Request Sample |
AquaKlean 403 | Micro Powders, Inc. | AQUAKLEAN 系列。为建筑内墙涂料,外部着色剂、密封胶、油漆和涂料设计的水性腊乳液。 提供优异耐磨擦性。同时保持长效"挂水珠"性,耐候和耐潮湿。 | |
AQUAMAT® 208 | BYK | 改善水性涂料和印刷油墨表面性能用具消光性的水性蜡分散体。 | Request Sample |
AQUAMAT® 263 | BYK | 水性家具、清漆、工业涂料和印刷油墨表面保护用具消光性的水性蜡分散体。 可改善下列表面性能: 抗划伤性、 抗粘、 清漆中防止鞋跟划痕、 柔软效果。 | Request Sample |
AquaMatte® 22 | Micro Powders, Inc. | 细微粉化高性价比聚乙烯蜡,经改性,容易分散加入水性体系,如印刷油墨、油漆和涂料中 | |
AquaMatte® 26HD | Micro Powders, Inc. | AquaMatte® 26HD is a very fine grade of densified oxidized polyethylene for gloss reduction and optimum stability in water based paints and coatings | |
AquaMatte® 31 | Micro Powders, Inc. | AquaMatte® 31 is a fine micronized oxidized polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings. | |
AquaPoly 215 | Micro Powders, Inc. | 细微粉化高性价比聚乙烯蜡,经改性,容易分散加入水性体系,如印刷油墨、油漆和涂料中 | |
AquaPoly 250 | Micro Powders, Inc. | 细微粉化聚乙烯蜡,经过改性,容易分散添加入水性体系,如印刷油墨、油漆和涂料(清漆)中 | |
AquaPolyfluo 411 | Micro Powders, Inc. | AquaPolyfluo 411 is a unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems. | |
AquaPolysilk 19 | Micro Powders, Inc. | ||
Aquaslip™ 678 | Lubrizol Advanced Materials, Inc. | Aquaslip™ 678 is a wax emulsion for water based decorative and industrial coatings. The usage of Aquaslip 678 can improve the water beading properties of the coating. In addition Aquaslip 678 improves slip and anti-blocking in most aqueous points and coat...展开 Aquaslip™ 678 is a wax emulsion for water based decorative and industrial coatings. The usage of Aquaslip 678 can improve the water beading properties of the coating. In addition Aquaslip 678 improves slip and anti-blocking in most aqueous points and coatings, with minimal effect on gloss or recoatability. 收起 | |
Aquaslip™ 682 | Lubrizol Advanced Materials, Inc. | Aquaslip™ 682 is a fine particle size wax emulsion intended for surface protection in aqueous coatings and inks. Aquaslip 682 provides excellent scratch and abrasion resistance. | |
AquaSuperslip 6550 | Micro Powders, Inc. | ||
AquaTex® 325 | Micro Powders, Inc. | ||
AQUATIX® 8421 | BYK | 流变改性蜡乳液,用于改善颜料在水性体系中的定向排列效果。它可以减少发糊/色不匀等缺陷,为储存和应用过程提供出色的抗沉降性能。相比粘土和丙烯酸增稠剂,它更容易操作和添加,而且它对助溶剂不如PU基增稠剂敏感。AQUATIX 8421极大地提高了流变性能和无助溶剂颜料浆体的闪耀效果。 | Request Sample |
Aquawax 214 | Micro Powders, Inc. | ||
Aquawax 214VF | Micro Powders, Inc. | ||
ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
BARECO™ C-4040 | Univar Solutions | BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available i...展开 BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available in grades ranging from hard, high melting crystalline waxes to soft, low melting flexible waxes. 收起 | Request Sample |
Boltorn™ W3000 | Perstorp | Boltorn™ W3000 is a yellow, wax, mphiphilic dendritic polymer that contains non-ionic as well as unsaturated fatty acid chains. TBoltorn™ W3000 allows incorporation of water in solvent borne alkyd paint resulting in both cost and VOC reduction. Boltorn™ W...展开 Boltorn™ W3000 is a yellow, wax, mphiphilic dendritic polymer that contains non-ionic as well as unsaturated fatty acid chains. TBoltorn™ W3000 allows incorporation of water in solvent borne alkyd paint resulting in both cost and VOC reduction. Boltorn™ W3000 modified paint possesses strong drying, hardness, gloss and chemical resistance. This product is used in alkyds, polyesters and pigment applications. 收起 | |
Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...展开 Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...展开 Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...展开 Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...展开 Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
CERACOL 604 | BYK | CERACOL 604 is a wax dispersion based on a carnauba wax for solvent-borne can coatings, to increase the surface slip and improve the scratch resistance. | Request Sample |
CERACOL 607 R | BYK | CERACOL 607 R is a wax dispersion based on a PTFE-modified polyethylene wax for solvent-borne can coatings and coil coatings. Increases surface hardness and surface slip. | Request Sample |
CERACOL® 609 N | BYK | 用来提高溶剂型罐头涂料表面性能的蜡分散体。 | Request Sample |
CERACOL® 79 | BYK | 分散在Dowanol DPM中的巴西棕榈蜡,用来提高罐内涂料的表面性质。 | Request Sample |
CERAFAK® 100 | BYK | 乙烯-醋酸乙烯-共聚蜡(E.V.A.),分散在二甲苯和乙酸丁酯中,用于溶剂型装饰涂料。 | Request Sample |
CERAFAK® 103 | BYK | 乙烯-丙烯酸-共聚蜡(E.A.A.),分散在二甲苯、醋酸正丁酯和正丁醇中,用于溶剂型装饰涂料。 | Request Sample |
CERAFAK® 106 | BYK | 乙烯-醋酸乙烯-共聚蜡(E.V.A.),分散在二甲苯、醋酸正丁酯和正丁醇中,用于溶剂型装饰涂料。 | Request Sample |
CERAFAK® 110 | BYK | 一种腊分散体,用于溶剂型和一次涂层金属面漆。 | Request Sample |
CERAFAK® 111 | BYK | 不含芳香族的聚乙烯 蜡分散体,用于溶剂型装饰涂料。 | Request Sample |
CERAFAK 117 | BYK | CERAFAK 117 is a wax dispersion to improve the water repellency of solvent-borne coating systems. | Request Sample |
CERAFAK 127 N | BYK | CERAFAK 127 N is a dispersion of a Fischer Tropsch wax for solvent-borne coil coatings and architectural coatings to improve surface characteristics. | Request Sample |
CERAFAK® 140N | BYK | 分散在溶剂石脑油(186 – 216°C)和正丁醇中的巴西棕榈蜡,用来提高溶剂型罐内涂料的表面性质。 | Request Sample |
CERAFLOUR 1050 | BYK | CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...展开 CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. 收起 | Request Sample |
CERAFLOUR 1051 | BYK | CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...展开 CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. 收起 | Request Sample |
CERAFLOUR 1052 | BYK | CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...展开 CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. 收起 | Request Sample |
CERAFLOUR® 913 | BYK | 它是一种微粉蜡,是水性或溶剂型涂料的表面纹理剂。推荐用于工业漆和木器漆中,它可以为涂膜提供均一的超细纹理,同时使涂膜手感柔软,而且具有良好的消光效果 | Request Sample |
CERAFLOUR® 914 | BYK | 微粉化改性聚丙烯蜡,用于水性和溶剂型油漆体系的表面织纹化。 | Request Sample |
CERAFLOUR® 915 | BYK | 微粉化改性聚丙烯蜡,用于水性和溶剂型油漆体系的表面织纹化。 | Request Sample |
CERAFLOUR® 916 | BYK | 改性HDPE蜡/聚合物的微粉化蜡混合物,用于水性和溶剂型油漆的表面织纹化。 | Request Sample |
CERAFLOUR 927 N | BYK | CERAFLOUR 927 N is a micronized, modified polyethylene wax for improving mechanical properties and for matting aqueous systems. | Request Sample |
CERAFLOUR 929 N | BYK | 微粉型蜡,用于提高溶剂型和水性系统的机械性能。 | Request Sample |
CERAFLOUR® 950 | BYK | 微粉化改性聚乙烯蜡混合物(HDPE),用于无溶剂型UV固化漆。 | Request Sample |
CERAFLOUR® 950 For Powder | BYK | 一种微粉化蜡,用来提高粉末涂料的表面特性。特别是提高抗刮擦性和去光。 | Request Sample |
CERAFLOUR 959 | BYK | CERAFLOUR 959 is a micronized PTFE polyethylene wax for powder coatings with a good price-performance ratio. | Request Sample |
CERAFLOUR® 960 | BYK | 可改善颜料的润湿和粉末涂料的流平性。更好的颜料润湿会引起光泽降低,此助剂还有一定脱泡性。 | Request Sample |
CERAFLOUR 961 | BYK | CERAFLOUR 961 is a highly effective wax additive for improved degassing of powder coatings on porous substrates. | Request Sample |
CERAFLOUR 962 | BYK | CERAFLOUR 962 is a highly effective wax additive for improved degassing of powder coatings on porous substrates. | Request Sample |
CERAFLOUR® 965 | BYK | 一种微粉化蜡,用于粉末涂料的表面织纹化,并且提高抗刮擦性能。 | Request Sample |
CERAFLOUR® 970 | BYK | 微粉化聚丙烯蜡,用于提高溶剂型油漆和粉末涂料的表面性能。 | Request Sample |
CERAFLOUR® 970 For Powder | BYK | 一种微粉化蜡,用来提高粉末涂料的表面特性。特别是提高附着力,抗滑和降低光泽度。 | Request Sample |
CERAFLOUR 988 | BYK | CERAFLOUR 988 is a micronized, amide-modified polyethylene wax for solvent-borne and solvent-free coating systems to improve the surface properties. | Request Sample |
CERAFLOUR® 991 | BYK | 微粉化聚乙烯蜡,用于提高各种溶剂型油漆、粉末涂料和印刷油墨的表面性能。 | Request Sample |
CERAFLOUR® 991 For Powder | BYK | 一种微粉化蜡,用来提高粉末涂料的表面特性。 | Request Sample |
CERAFLOUR® 993 | BYK | 微粉化胺蜡,用于提高溶剂型油漆体系和粉末涂料的表面性能。 | Request Sample |
CERAFLOUR® 994 | BYK | 超细微粉化氨蜡,用于提高家具地板漆以及粉末涂料的表面性能。 | Request Sample |
CERAFLOUR® 994 For Powder | BYK | 一种微粉化蜡,用来提高粉末涂料的脱气和颜料的润湿。 | Request Sample |
CERAMAT® 248 | BYK | 溶剂型装饰涂料表面保护用具消光性的水性蜡分散体。 | Request Sample |
CERAMAT 250 | BYK | CERAMAT 250 is an aromatic-free wax dispersion based on a polyethylene wax for solvent-borne coatings to improve surface protection. It has a soft-feel effect, matting effect and reduces settling. | Request Sample |