UL Prospector

成功!

成功保存搜索结果
3M™ Ceramic Microspheres W-210 3M Advanced Materials Division 3M™ Ceramic Microspheres W210是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平,增加填料添加量,提高硬度,增加各种涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状,具有非常高的强度,粒径为0.3-12微米,与其他3M白色陶瓷微球相比具有最小的消光度,可理想地应用于浅色薄膜涂料和粉末涂料
3M™ Ceramic Microspheres W-410 3M Advanced Materials Division 3M™ Ceramic Microspheres W410是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平,增加填料添加量,提高硬度,增加不同涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状,具有非常高的强度,粒径为0.3-24微米,具有中等消光度,可理想地应用于耐擦亮的建筑漆,大多数浅色工业和维护产品
3M™ Ceramic Microspheres W-610 3M Advanced Materials Division 3M™ Ceramic Microspheres W610是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平,增加填料添加量,提高硬度和增加不同涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状,具有非常高的强度,粒径为0.3-40微米,是3M白色产品中消光度最大的。是厚度超过2密耳的维护漆、低光泽涂料、胶粘剂和装饰地板漆的出色选择
3M™ Glass Bubbles K1 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K1的密度为0.125g/cc,均衡耐压强度为250psi
3M™ Glass Bubbles K15 3M Advanced Materials Division 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....展开 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles K20 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K20的密度为0.2g/cc,均衡耐压强度为500psi
3M™ Glass Bubbles K25 3M Advanced Materials Division 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....展开 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles K37 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K37的密度为0.37g/cc,均衡耐压强度为3000psi
3M™ Glass Bubbles K42HS 3M Advanced Materials Division 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...展开 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles K46 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles K46的密度为0.46g/cc,均衡耐压强度为6000psi
3M™ Glass Bubbles S15 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S15的密度为0.15g/cc,均衡耐压强度为300psi
3M™ Glass Bubbles S22 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S22的密度为0.22g/cc,均衡耐压强度为400psi
3M™ Glass Bubbles S28HS 3M Advanced Materials Division 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...展开 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles S32 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S32的密度为0.22g/cc,均衡耐压强度为400psi
3M™ Glass Bubbles S35 3M Advanced Materials Division 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...展开 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles S38 3M Advanced Materials Division 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...展开 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles S38HS 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S38HS的密度为0.38g/cc,均衡耐压强度为5500psi
3M™ Glass Bubbles S42XHS 3M Advanced Materials Division 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...展开 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles S60 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S60的密度为0.6g/cc,均衡耐压强度为10000psi
3M™ Glass Bubbles S60HS 3M Advanced Materials Division 加工添加剂,用于新一代轻质、高性能油漆和涂料。3M™ Glass Bubbles是高强度、低密度的加工添加剂,应用从专业建筑漆和工业漆到轻质填泥料、填缝剂、胶粘剂和屋面涂料。 制造商应用3M玻璃微球以减轻重量,提高反射率,减少收缩,改善表面外观,降低总体材料成本以及其他许多产品性能的优化。3M™ Glass Bubbles S60HS的密度为0.6g/cc,均衡耐压强度为18000psi
3M™ Glass Bubbles XLD3000 3M Advanced Materials Division 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...展开 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles iM16K 3M Advanced Materials Division 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...展开 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
3M™ Glass Bubbles iM30K 3M Advanced Materials Division 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...展开 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. 收起
AC-67 Ark (Fogang) Chemicals Industry Co., Ltd. AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...展开 AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. 收起
ADDAPT® SilStab HL+ ADDAPT Chemicals BV ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preserva...展开 ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preservatives. 收起
ADDAPT® SilStab L 100 ADDAPT Chemicals BV ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion proper...展开 ADDAPT® SilStab L 100 is a solvent-free, stabilized potassium silicate solution in water. It is added to interior and exterior coatings as well as textured masonry coatings. This product is non-foaming, free of preservatives, and has anti-corrosion properties when applied to ferrous surfaces. The high stability of ADDAPT® SilStab L 100 allows it to be added to coatings without causing coagulation, and no additional stabilizing additives are necessary. 收起
ADDAPT® SilStab L 50 ADDAPT Chemicals BV ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be ad...展开 ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be added to coatings without causing coagulation. 收起
Request Sample AKTIFIT AM Hoffmann Mineral AKTIFIT AM是一种激活的SILFIT Z 91,对氨基官能团硅烷进行了表面改性。作为一种功能填料,既可以单独使用,也可结合其它填料或消光剂使用。结合产生硫磺或硫磺的基团,氨基或双酚交联体系可使极性弹性体取得最佳效果。可用于需要高抗张强度和高模量以及非常低的拉伸和压缩形变的场合,兼顾出色的加工和挤出性能
Request Sample AKTIFIT PF 111 Hoffmann Mineral AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints.
Request Sample AKTIFIT PF 115 Hoffmann Mineral AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...展开 AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). 收起
Request Sample AKTIFIT Q Hoffmann Mineral AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...展开 AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). 收起
Request Sample AKTIFIT VM Hoffmann Mineral AKTIFIT VM是一种激活的SILFIT Z 91。作为一种功能填料,既可以单独使用,也可结合其它填料或消光剂使用。用于通过自由基引发反应进行聚合的基料体系可获得最佳效果。
Request Sample AKTISIL AM Hoffmann Mineral 用氨基硅烷进行表面处理的活化SILLITIN Z 86。作为功能性填充料,可单独或与流变助剂和/或消光剂共同使用。
Request Sample AKTISIL MAM Hoffmann Mineral 用甲基丙烯酸硅烷进行表面处理的活化SILLITIN Z 88。作为功能性填充料,可单独或与流变助剂和/或消光剂共同使用 。
Request Sample AKTISIL MAM-R Hoffmann Mineral 用甲基丙烯酸硅烷进行表面处理的活化SILLITIN Z 85。作为功能性填充料,可单独或与流变助剂和/或消光剂共同使用 。
Request Sample AKTISIL MM Hoffmann Mineral 用巯基硅烷进行表面处理的活化SILLITIN Z 86。作为功能性填充料,可单独或与流变助剂和/或消光剂共同使用 。
Request Sample AKTISIL PF 777 Hoffmann Mineral 活性SILLITIN Z 86,采用烷基硅烷对表面进行改性制得。反应过程中分离出来的副产品大部分都通过生产工艺被祛除,这些副产品使硅烷牢固地吸附在填料的表面。这一点有助于最大限度地减少不需要的副作用,因为它们可能与原位混合(硅烷直接添加到混合物中)发生冲突。
Request Sample AKTISIL VM 56 Hoffmann Mineral 用乙烯基硅烷进行表面处理的活化SILLITIN Z 86。作为功能性填充料,可单独或与流变助剂和/或消光剂共同使用 。
Request Sample AKTISIL VM 56 / 89 Hoffmann Mineral AKTIFIT VM 56/89是一种激活的SILFIT Z 89,对3-乙烯三乙氧基硅烷进行了表面改性。作为一种功能填料,既可以单独使用,也可结合其它填料或消光剂使用。
ALBACAR® 5970 Specialty Minerals ALBACAR® 5970 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 50 and a specific gravity of 2.7. ALBACAR® 5970 is used as a filler in paints, adhesives, sealants, caulks, and plastics.
ALBACAR® 8101 Specialty Minerals ALBACAR® 8101 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 36 and a specific gravity of 2.7. ALBACAR® 8101 is used as a filler in paints, adhesives, sealants, caulks, and plastics.
ALBAFIL® Specialty Minerals ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatin...展开 ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatings. 收起
Accowear Accoat A/S Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant prop...展开 Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant properties. 收起
Almatis BayGranite®17 ATH (Aluminum Trihydroxide) Almatis, Inc. Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is pr...展开 Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. It is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. 收起
Almatis FlameGard® ATH (Aluminum Trihydroxide) Almatis, Inc. Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, ...展开 Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. Although FlameGard is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. 收起
AnTec C-60 Anpeak Specialty Minerals Co., Ltd. AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extende...展开 AnTec C-60, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to improve brightness. It can be used as an extender in paints and coatings. 收起
AnTec C-98 Anpeak Specialty Minerals Co., Ltd. AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a f...展开 AnTec C-98, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by controlled heat treatment in order to remove crystalline-bound hydroxyl groups and in order to improve brightness. It can be used as a functional pigment extender in coatings, paints, and printing inks. 收起
AnTec C-OP Anpeak Specialty Minerals Co., Ltd. AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low...展开 AnTec C-OP, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups and to remove brightness. It can be used in flat or low-sheen architectural paints. It can also serve as an ink receptacle in specialty paper applications. 收起
AnTec MM Anpeak Specialty Minerals Co., Ltd. AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies...展开 AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies between 2.5 and 2.7, and it contains less than .5% free moisture. 收起
AnTec WE Anpeak Specialty Minerals Co., Ltd. AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. ...展开 AnTec WE, in the form of a highly pulverized powder, is a calcined kaolin. This product has been dehydroxylated by a controlled heat treatment in order to remove crystalline-bound hydroxyl groups. It can be used as an extender for pigment applications. It contains less than 0.5% free moisture at 105 degrees Celsius. 收起
Anhydrite Provencale S.A. Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....展开 Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. 收起
Anti-Reflective Application Nano Alumina B8013-2 Tianjin Boyuan New Materials Co., Ltd. B8013-2具有小的粒径和出色的分散性,使其在抗反射涂层中十分有效。它可以用于光伏玻璃和PET中。它可以通过减少光反射的方式增加透光率。
Arbocel® 230 Interfibe Corporation Arbocel® 230 is a grey reclaimed cellulose fiber that is insoluble in water. This product improves a variety of adhesive formulations, which includes: acrlyic, butyl, epoxy, latex, or any type of solvent. Arbocel® 230 provides improved oil retention, ten...展开 Arbocel® 230 is a grey reclaimed cellulose fiber that is insoluble in water. This product improves a variety of adhesive formulations, which includes: acrlyic, butyl, epoxy, latex, or any type of solvent. Arbocel® 230 provides improved oil retention, tensile strength, and overall formulation performance. 收起
Arbocel® 566 Interfibe Corporation Arbocel® 566 is a white reclaimed cellulose fiber that is used as an acrylic roof coating as well as an acrylic textured paint. This product can also be used to add body and texture to coating formulas as well as a wood putty or glue. Arbocel® 566 can b...展开 Arbocel® 566 is a white reclaimed cellulose fiber that is used as an acrylic roof coating as well as an acrylic textured paint. This product can also be used to add body and texture to coating formulas as well as a wood putty or glue. Arbocel® 566 can be used to increase tensile strength and to increase resistance to sagging. 收起
Arbocel® 5FT Interfibe Corporation Arbocel® 5FT is a white reclaimed cellulose fiber that is insoluble in water and is primarily used as a grout and tile adhesive. This product improves both oil retention and tensile strength in formulations. Arbocel® 5FT tends to contribute to a stable ...展开 Arbocel® 5FT is a white reclaimed cellulose fiber that is insoluble in water and is primarily used as a grout and tile adhesive. This product improves both oil retention and tensile strength in formulations. Arbocel® 5FT tends to contribute to a stable viscosity and prevents sagging. 收起
Arbocel® FTP Interfibe Corporation Arbocel® FTP is a grey reclaimed cellulose fiber that is insoluble in water. This product has a bulk density of 98 g/l and is primarily used as an acrylic tennis court coating and as a cushion coat for other recreational surfaces. Arbocel® FTP features ...展开 Arbocel® FTP is a grey reclaimed cellulose fiber that is insoluble in water. This product has a bulk density of 98 g/l and is primarily used as an acrylic tennis court coating and as a cushion coat for other recreational surfaces. Arbocel® FTP features the ability to reduce resin demand and improve finished coating consistency. 收起
Arbocel® GC-66 Interfibe Corporation Arbocel® GC-66 is a grey cellulose fiber that is most often used as a gunnable (cartridge) butyl sealant. This product has a bulk density of 119g/l and provides improved oil retention, increases tensile strength, and improves performance of applicable fo...展开 Arbocel® GC-66 is a grey cellulose fiber that is most often used as a gunnable (cartridge) butyl sealant. This product has a bulk density of 119g/l and provides improved oil retention, increases tensile strength, and improves performance of applicable formulations. 收起
Arbocel® GCW10 Interfibe Corporation Arbocel® GCW10 is white reclaimed cellulose that is used in acrylic roof coating as well as acrylic textured paint. This product is insoluble in water and can improve all types of adhesive formulations, which includes: acrylic, butyl, epoxy, latex, or an...展开 Arbocel® GCW10 is white reclaimed cellulose that is used in acrylic roof coating as well as acrylic textured paint. This product is insoluble in water and can improve all types of adhesive formulations, which includes: acrylic, butyl, epoxy, latex, or any type of solvent. In addition to being used as an acrylic coating and paint, Arbocel® GCW10 can also be deployed as an extruded tape product. 收起
Arbocel® GCW90 Interfibe Corporation Arbocel® GCW90 is a white reclaimed cellulose fiber that is insoluble in water. This product is meant to enhance adhesive formulations, which include acrylic, butyl, epoxy, latex, or any type of solvent. Arbocel® GCW90 contributes to a stable viscosity...展开 Arbocel® GCW90 is a white reclaimed cellulose fiber that is insoluble in water. This product is meant to enhance adhesive formulations, which include acrylic, butyl, epoxy, latex, or any type of solvent. Arbocel® GCW90 contributes to a stable viscosity and adds tensile strength. 收起
Arbocel® JMC Interfibe Corporation Arbocel® JMC is a semi-coarse natural cellulose fiber that is grey in color. This product is primarily used as an asphalt roof coating or cement and can also be used as a thickener, reinforcement fiber, absorbent, or as an extender. In addition to the a...展开 Arbocel® JMC is a semi-coarse natural cellulose fiber that is grey in color. This product is primarily used as an asphalt roof coating or cement and can also be used as a thickener, reinforcement fiber, absorbent, or as an extender. In addition to the aforementioned features and applications, this product also provides high levels of oil absorption and increases internal reinforcement in coatings. 收起
Arbocel® JMM Interfibe Corporation Arbocel® JMM is a semi-coarse natural cellulose fiber that grey in color. This product is primarily made from natural raw materials and is primarily used as an asphalt roof coating. As an asphalt coating, Arbocel® JMM provides benefits such as high oil...展开 Arbocel® JMM is a semi-coarse natural cellulose fiber that grey in color. This product is primarily made from natural raw materials and is primarily used as an asphalt roof coating. As an asphalt coating, Arbocel® JMM provides benefits such as high oil absorption and viscosity-building characteristics. This product can also be used as a thickener, extender, or filler. 收起
Arbocel® RT Interfibe Corporation Arbocel® RT is a highly purified cellulose fiber that is light brown in color. This product is primarily used as a one and two-part epoxy or as a butyl tape/caulk. Arbocel® RT possesses the capability to contribute to a stable viscosity, can increase te...展开 Arbocel® RT is a highly purified cellulose fiber that is light brown in color. This product is primarily used as a one and two-part epoxy or as a butyl tape/caulk. Arbocel® RT possesses the capability to contribute to a stable viscosity, can increase tensile strength, and helps prevent sagging. When Arbocel® RT is added to other products it has little effect on the appearance of the final product. 收起
Request Sample Attasorb® 5/25 LVM BASF Dispersions & Resins Attasorb® 5/25 LVM is an economical, size-controlled attapulgite absorbent used for a wide range of industrial and commercial applications. It performs well as an absorbent of either water or oils and greases. Automotive shops, industrial and machine-shop...展开 Attasorb® 5/25 LVM is an economical, size-controlled attapulgite absorbent used for a wide range of industrial and commercial applications. It performs well as an absorbent of either water or oils and greases. Automotive shops, industrial and machine-shop floors, and any other location where oil and/or grease can leak or build up are ideal locations to apply Attasorb® 5/25 LVM. In addition to absorbing oils and greases, Attasorb® 5/25 LVM absorbent can absorb water, reduce the slippery nature of spills, and be used as a consolidating material for liquids in need of disposal. 收起
BARISTAR® 9015 Minerals Girona S.A. Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...展开 Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. 收起
Request Sample BENTONE® 34 Elementis BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems.
Request Sample BENTONE® DH Elementis BENTONE® DH是一种无溶剂,以锂皂土为基础的粉末,可用于由于改进流程而具有脱水收缩控制性能的的低挥发或零挥发型装饰涂料。这种锂皂土是一种比HEC和凹凸棒土更经济的替代物,但却并不会影响到产品性能。它不含结晶硅,所以不需按65号提案要求提交报告。它同时与多种流变改性剂兼容。本公司可应需求提供起始配方。
Request Sample BILT-PLATES® 156 Vanderbilt Minerals, LLC 风选高岭土(水合硅酸铝)。可应用于底漆、醇酸平光漆和乳胶漆中。应用于不需要高白度增补填料的涂料中具有良好的二氧化钛增补作用
BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm Sino-American Pigment Systems, Inc. BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起
BP Heavy Kaolin Imerys Kaolin BP Heavy kaolin is a purified hydrous kaolin. This kaolin (china clay) is a fine, white powder, odourless and smooth to the touch.
BP Light Kaolin Imerys Kaolin BP Light Kaolin is a native hydrous kaolin, free from most of its impurities, dried and milled to a fine powder. This kaolin (china clay) is a light, white powder, free from gritty particles, odourless and unctuous to the touch.
BP Light Kaolin (Natural) Imerys Kaolin BP Light Kaolin (Natural) is a native hydrous kaolin, free from most of its impurities, dried and milled to a fine powder. This kaolin (china clay) is a light, white powder, free from gritty particles, odourless and unctuous to the touch.
BURGESS 2211 Burgess Pigment Company BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS 30P® Burgess Pigment Company BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS 5178 Burgess Pigment Company BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS CB Burgess Pigment Company BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS ICEBERG® Burgess Pigment Company BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起
BURGESS ICECAP KSF Burgess Pigment Company BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起
BURGESS ICECAP K® Burgess Pigment Company BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS KE Burgess Pigment Company BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 10 Burgess Pigment Company BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS.
BURGESS NO. 17 Burgess Pigment Company BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness.
BURGESS NO. 20 Burgess Pigment Company BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 27 Burgess Pigment Company BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints.
BURGESS NO. 28 Burgess Pigment Company BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems.
BURGESS NO. 30® Burgess Pigment Company BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 40 Burgess Pigment Company BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives.
BURGESS NO. 50® Burgess Pigment Company BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起
BURGESS NO. 60 Burgess Pigment Company BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS.
BURGESS NO. 97 Burgess Pigment Company BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints.
BURGESS NO. 98 Burgess Pigment Company BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起
BURGESS OPTIPOZZ® Burgess Pigment Company BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS OPTIWHITE MX® Burgess Pigment Company BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起
BURGESS OPTIWHITE P® Burgess Pigment Company BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness.
BURGESS OPTIWHITE® Burgess Pigment Company BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起
BURGESS POLYCLAY Burgess Pigment Company BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks.
BURGESS THERMOGLACE H Burgess Pigment Company BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起
Ballotini® A Potters Industries Inc. Ballotini® A is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 20-30 and a particle diameter range of 600-850 microns. Ballotini® A is most commonly used in metal finishing applications.
Ballotini® AA Potters Industries Inc. Ballotini® AA is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 40-70 and a particle diameter range of 212-425 microns. Ballotini® AA is most commonly used in metal finishing applications.
Ballotini® AAA Potters Industries Inc. Ballotini® AAA is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 25-45 and a particle diameter range of 355-710 microns. Ballotini® AAA is most commonly used in metal finishing applications.
Ballotini® AB Potters Industries Inc. Ballotini® AB is a transparent, colorless, spherical glass microbead. This product has a US Sieve size of 50-80 and a particle diameter range of 180-300 microns. Ballotini® AB is most commonly used in metal finishing applications.