| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres W210是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平，增加填料添加量，提高硬度，增加各种涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状，具有非常高的强度，粒径为0.3-12微米，与其他3M白色陶瓷微球相比具有最小的消光度，可理想地应用于浅色薄膜涂料和粉末涂料 | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres W410是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平，增加填料添加量，提高硬度，增加不同涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状，具有非常高的强度，粒径为0.3-24微米，具有中等消光度，可理想地应用于耐擦亮的建筑漆，大多数浅色工业和维护产品 | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres W610是独特的半透明微小粒径、高强度陶瓷微球。可用于降低VOC水平，增加填料添加量，提高硬度和增加不同涂料配方的耐擦亮、耐擦洗和耐磨损性能。具有高强度、坚硬、惰性、厚壁白色球状，具有非常高的强度，粒径为0.3-40微米，是3M白色产品中消光度最大的。是厚度超过2密耳的维护漆、低光泽涂料、胶粘剂和装饰地板漆的出色选择 | |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...展开 LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. 收起 | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. 收起 | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...展开 LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. 收起 | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...展开 LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. 收起 | |
| Microbrite 10 | Micronized Products | Microbrite 10 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 21%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Micro...展开 Microbrite 10 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 21%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 10 is most commonly used as a filler/extender in coating applications. 收起 | |
| Microbrite 15 | Micronized Products | Microbrite 15 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 17%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Micro...展开 Microbrite 15 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 17%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 15 is most commonly used as a filler/extender in coating applications. 收起 | |
| Microbrite 2 | Micronized Products | Microbrite 2 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 2 is most commonly used in c...展开 Microbrite 2 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 2 is most commonly used in coating, adhesive, and mastic applications. 收起 | |
| Microbrite 5 | Micronized Products | Microbrite 5 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 20-22%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Mic...展开 Microbrite 5 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate with an oil absorption rate of 20-22%. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 5 is most commonly used as a filler/extender in coating applications. 收起 | |
| Min-U-Gel® 400 | Active Minerals | Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal l...展开 Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal lathe-shaped particles forming a very stable lattice structure that keeps liquids and particles more evenly dispersed and suspended. The uniformity it creates generates unique multi-functional performance benefits well beyond rheological properties, such as syneresis control, suspension, improved tint strength and hiding, reduced pigment flooding and in-can stability. 收起 | Request Sample |
| MINEX® 10 | Sibelco | MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product ha...展开 MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 2.1 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® 10 (Tamms, Il.) | Sibelco | MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...展开 MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 2.1 microns. 收起 | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...展开 MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® 2 | Sibelco | MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...展开 MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 14.3 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® 3 | Sibelco | MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...展开 MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 10.8 microns. 收起 | |
| MINEX® 4 | Sibelco | MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...展开 MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 6.8 microns. 收起 | |
| MINEX® 7 | Sibelco | MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...展开 MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 3.5 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® IG-16 | Sibelco | MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, w...展开 MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 900 microns. 收起 | |
| MINEX® IG-20 | Sibelco | MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, ...展开 MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 600 microns. 收起 | |
| MINEX® IG-25 | Sibelco | MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...展开 MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 550 microns. 收起 | |
| MINEX® IG-35 | Sibelco | MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...展开 MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 268 microns. 收起 | |
| MINEX® IG-40 | Sibelco | MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...展开 MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 265 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® IG-50 | Sibelco | MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...展开 MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 225 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® IG-56 | Sibelco | MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...展开 MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 125 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| MINEX® IG-60 | Sibelco | MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...展开 MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 120 microns and is easily dispersed in all conventional vehicle systems. 收起 | |
| SYLOWHITE™ SM 405 Titanium Dioxide Extender | Univar Solutions | SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum s...展开 SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum silicate powder with excellent dispersion properties. With its high level of purity, controlled particle size distribution and high level of whiteness, SYLOWHITE™ SM 405 TiO2 Extender is mainly used as an advanced functional TiO2 pigment extender in paints and printing inks for the partial replacement of titanium dioxide. By replacing up to 25% of the titanium dioxide, SYLOWHITE™ SM 405 TiO2 Extender reduces the overall costs of the pigmented coating while improving the hiding power and optical brightness properties of the paint. 收起 | Request Sample |
| SYLOWHITE™ SM 405 Titanium Dioxide Extender | GRACE | SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum s...展开 SYLOWHITE™ SM 405 Titanium Dioxide Extender is a flavorless and odorless, precipitated synthetic amorphous sodium magnesium aluminum silicate. It appears as a white free-flowing powder. It is a fine-sized precipitated amorphous sodium magnesium aluminum silicate powder with excellent dispersion properties. With its high level of purity, controlled particle size distribution and high level of whiteness, SYLOWHITE™ SM 405 TiO2 Extender is mainly used as an advanced functional TiO2 pigment extender in paints and printing inks for the partial replacement of titanium dioxide. By replacing up to 25% of the titanium dioxide, SYLOWHITE™ SM 405 TiO2 Extender reduces the overall costs of the pigmented coating while improving the hiding power and optical brightness properties of the paint. 收起 | |
| WhiteLite™ WL-32 | Glassfillers.com (A unit of Vitrominerals Inc.) | WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight th...展开 WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-32 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-32 has a bulk density of 50 lb/ft3, oil absorption of 22, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 4, and a brightness of 90 to 91 photovolt Y value. 收起 | |
| WL-42 | Glassfillers.com (A unit of Vitrominerals Inc.) | WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight t...展开 WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-42 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-42 has a bulk density of 40 lb/ft3, oil absorption of 25, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 2, and a brightness of 90 to 91 photovolt Y value. 收起 |
